| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-100G-ER4L-S | QSFP-100G-SR4-S |
| 2 | Arista Networks | QSFP-100G-ERL4 | QSFP28-100G-PSM4 |
| 3 | Dell | Q28-100G-ER4-lite | QSFP28-100G-IR4 |
| 4 | Huawei | QSFP-100G-ER4-Lite | QSFP28-100G-LR4 |
| 5 | Juniper Networks | QSFP-100G-ER4L | QSFP28-100G-ZR4 |
| 6 | Ruijie Networks | 100G-QSFP-ER4-SM1310 | QSFP28-100G-DR |
| 7 | HPE Aruba | JL743A | QSFP28-100G-FR |
| 8 | Brocade | 100G-QSFP28-ER4-40KM | QSFP28-100G-LR |
| 9 | Ciena | XCVR-Q30V31 | |
| 10 | EdgeCore | ET7402-ER4 |
| Ciena Compatible | XCVR-Q30V31 | Vendor Name | HYTOPTODEVICE |
| Form Factor | QSFP28 | Max Data Rate | 103.125Gbps |
| Wavelength | 4 x LAN WDM (1295、1300、1305、1310nm) | Max Distance | 30km without FEC 40km with FEC |
| Connector | Duplex LC | Transmitter Type | 4 x LAN WDM EML |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | -2.5~+4.5dBm | Receiver Sensitivity | <-16.9dBm without FEC <-20.9dBm with FEC |
| Protocols | 100G Ethernet, MSA Compliant | Power Consumption | < 4.0W |
Usage Guidelines & Best Practices
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm CWDM4 module.
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<15km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.(15KM<Distance<35km,connect 5‑10dB optical attenuator),ensuring the received power <-3dBm.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
Operating Environment: 0°C–70°C commercial temperature range. Ensure cabinet ventilation to avoid optical power attenuation from overheating.
Full Compatibility List & Supported Network Hardware
1.Native Ciena Compatibility


The Core Features
1.Broad 100G Data Center Applicationg
Supports reliable, high-efficiency long-haul data transmission between core and spine network layers, fully satisfying deployment requirements for large-scale data centers.
2. 100G High-Speed Data Center Connectivity

3. Host-Tested for Proven Interoperability
Every module undergoes rigorous compatibility validation on target host switches, ensuring stable, error-free operation in your live network environment.Specific Compatibility Video available upon request.


Q1: Will Ciena XCVR‑Q30V31 drop‑in replacement QSFP28 ER4 Lite function inside older 40G‑only QSFP+ router interfaces? A: It cannot establish valid links in QSFP+ 40G slots. This HYTOPTODEVICE Ciena‑compatible ER4 Lite runs fixed 100G line‑rate and lacks rate‑negotiation fallback capability. Network integrators must utilize native QSFP28 100G ports on Ciena 5100/8100 aggregation routers to achieve full 100GBASE‑ER4L performance.
Q2: What practical performance differences exist between ER4 Lite and full‑spec ER4 when sourcing Ciena‑compatible 100G optics for carrier metro tender projects? A: ER4 Lite delivers identical 40km reach while consuming 0.5‑1W less power versus full‑spec ER4. Under HYTOPTODEVICE lab validation, bit‑error‑rate stays below 1E‑12 across full commercial temperature range. Distributors can recommend this power‑saving variant for metro tender projects that do not demand extra optical power headroom above 40km.
Q3: Can this Ciena‑qualified 100GBASE‑ER4L transceiver run over duplex OS2 single‑mode fiber for service‑provider backbone rollouts? A: Yes, this HYTOPTODEVICE QSFP28 ER4 Lite requires two OS2 single‑mode fiber cores for bidirectional 100G traffic, integrating four‑channel LAN‑WDM wavelengths within one housing. Procurement teams should validate duplex fiber availability during site surveys prior to submitting bulk purchase orders for these replacement transceivers.
Q4: Is OM‑series multimode fiber acceptable when deploying XCVR‑Q30V31‑equivalent QSFP28 modules for inter‑site carrier transmission links? A: Multimode fiber is not suitable for this 40km transmission application. Even premium OM4 multimode suffers high modal dispersion, limiting practical 100G distance to merely 100‑150 meters. HYTOPTODEVICE strongly advises end‑users deploy OS2 single‑mode exclusively; wholesalers can bundle matching fiber assemblies alongside transceiver orders for complete project kits.
Q5: Why utilize the 1310nm LAN‑WDM wavelength grid for Ciena‑compatible 40km 100G metro aggregation transceivers? A: The 1295‑1309nm LAN‑WDM window shows typical 0.22dB/km attenuation on OS2 single‑mode fiber. HYTOPTODEVICE calibrates every individual laser channel against this wavelength standard, securing consistent optical power budget for 40km spans. System integrators gain low‑loss transmission without the higher expense of C‑band DWDM components for metro aggregation networks.
Q6: Are duplex LC optical attenuators mandatory for short‑span links under 10 km using Ciena‑compatible QSFP28 ER4‑Lite transceivers? A: Attenuators are mandatory for links shorter than 10 km. Our module TX output ranges from ‑2.5~+4.5dBm and receiver overload threshold is ‑3.5dBm; unattenuated short‑span connections will exceed the overload threshold. HYTOPTODEVICE recommends buyers install 10‑15dB duplex LC attenuators to prevent receiver saturation and preserve stable link performance for short rack‑mounted router‑to‑router connections.
Q7: How much chromatic dispersion safety margin do HYTOPTODEVICE Ciena‑compatible 100GBASE‑ER4‑Lite transceivers provide for real‑world 40km carrier fiber routes? A: Every unit is pre‑characterized for OS2 fiber chromatic dispersion up to maximum 40km reach. Our factory burn‑in procedure simulates real‑world fiber dispersion conditions, maintaining post‑FEC bit‑error‑rate well below 1E‑12. This creates safety allowance for splice and connector losses commonly encountered on integrator‑managed leased carrier‑fiber circuits.
Q8: What field‑failure hazards stem from excessive incoming optical power on XCVR‑Q30V31 alternative QSFP28 ER4‑Lite transceiver hardware? A: Over‑level receive power can permanently degrade the built‑in photodiode receiver. Field‑return statistics from HYTOPTODEVICE RMA datasets indicate roughly 60 % of faulty long‑reach 100G optical module returns originate from unattenuated short‑link operation. Distributors should pass power‑matching deployment best practices onward to their carrier‑end technical teams.
Q9: What environmental operating boundaries apply for commercial‑grade Ciena XCVR‑Q30V31 replacement optics sourced from HYTOPTODEVICE? A: Standard commercial SKU delivers stable operation within 0℃ to +70℃ cabinet ambient temperature. Each HYTOPTODEVICE unit undergoes 8‑hour high‑low temperature cycling QA testing during production. Wholesalers bidding for outdoor cabinet carrier projects may inquire regarding our industrial‑grade ‑40~+85℃ variant for non‑climate‑controlled field hardware deployments.
Q10: Do HYTOPTODEVICE Ciena‑compatible QSFP28 ER4‑Lite transceivers satisfy global MSA and IEEE standards for third‑party carrier‑grade 100G router optics? A: Yes, all electrical, mechanical and optical parameters comply with IEEE 802.3 and QSFP28 MSA SFF‑8665 specifications. Complete DDM/DOM monitoring registers strictly observe MSA‑defined memory mapping. This standard‑compliance allows system integrators to perform mixed‑vendor optics coexistence within multi‑brand carrier network fabrics.
Q11: What compliance paperwork is delivered together with bulk‑volume shipments of Ciena‑compatible 100G QSFP28 ER4‑Lite optical transceivers? A: Each bulk shipment includes CE, FCC, RoHS compliance certificates plus batch‑specific optical test data reports. HYTOPTODEVICE furnishes comprehensive document sets facilitating customs clearance and carrier‑project audit requirements. Global resellers may request supplementary declaration forms to satisfy regional import regulatory constraints.
Q12: What warranty and advanced‑replacement conditions apply for large‑scale carrier‑project bulk orders of HYTOPTODEVICE Ciena‑replacement 100G transceivers? A: Standard factory warranty covers early‑phase manufacturing defects supported by expedited advanced‑replacement logistics. High‑volume system‑integrator carrier‑projects qualify for priority stock reservation. Distributors maintaining recurring quarterly procurement volumes can open dedicated support tickets accelerating RMA handling for their operator end‑customer sites.
Q13: Which periodic preventive maintenance actions should carrier technicians execute on deployed 40km 100GBASE‑ER4L Ciena‑compatible transceivers? A: Visual LC port cleaning plus insertion‑loss spot‑check every 6‑12 months is strongly advised. Contaminated fiber end‑faces cause a large proportion of slow‑degrading intermittent carrier‑network faults. HYTOPTODEVICE suggests network operators enable DDM power‑threshold alerts as part of routine O&M workflows for metro‑aggregation backbone infrastructure.
Q14: Can HYTOPTODEVICE Ciena‑compatible QSFP28 ER4‑Lite optics sustain error‑free links for 25‑30km intermediate‑distance carrier data‑center interconnect scenarios? A: Yes, the module possesses ample optical‑power margin for 25‑30km DCI use‑cases. Internal lab testing confirms error‑free stable performance even with cumulative 3‑4dB splice‑and‑connector insertion loss. This makes the part appealing for procurement teams handling geographically‑separated carrier‑campus data‑center interconnection assignments.
Q15: Are third‑party compatible 100GBASE‑ER4‑Lite QSFP28 transceivers suitable for operator‑leased dark‑fiber metro circuits running on Ciena aggregation‑router platforms? A: Yes, HYTOPTODEVICE MSA‑compliant ER4‑Lite works reliably over standard OS2 leased dark‑fiber circuits. Our engineering group provides complimentary link‑budget calculation assistance for system‑integrator carrier‑customer tender bids. Always validate total measured fiber loss pre‑deployment to prevent marginal‑link issues on operator‑provided metro fiber paths
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




