Adtran 1442340G1 Compatible 1000BASE-EX SFP 1310nm 40km DDM Duplex LC/UPC SMF Optical Transceiver Module

The HYTOPTODEVICE Adtran compatible 40km SFP is rigorously tested for compatibility with:

• Adtran Total Access 5000 (TA5000) Series: TA5000, TA5004, TA5006 OLT platforms.

• Adtran NetVanta Series Switches: NetVanta 1531, 1544, 1550, 1600 series.

• Adtran NetVanta Routers: Models with SFP uplink or tributary slots.

• Adtran Optical Networking Edge Appliances: Various multiservice access platforms.

• Service Provider Aggregation: Reliable 1.25G fiber handoffs for regional ISPs and telecommunications backhaul up to 40km.

• Rural Broadband Extension: Connecting remote access nodes to the central office in fiber-to-the-home (FTTH) deployments.

• Enterprise Metropolitan Links: Linking geographically dispersed office campuses or utility monitoring stations where standard 10km LX modules are insufficient.

FAQ for Adtran 1442340G1 Compatible SFP Transceiver:

Q1: Will the HYTOPTODEVICE module work without "unsupported transceiver" errors in Adtran? A: Yes. Our modules are flashed with the specific Adtran EEPROM signatures, ensuring they are recognized correctly by Adtran AOS and other firmware versions, allowing for full "plug-and-play" functionality.

Q2: Does this 40km module support DDM/DOM? A: Absolutely. It features full Digital Diagnostic Monitoring (DDM), enabling real-time monitoring of laser temperature, supply voltage, and optical tx/rx power levels via the Adtran CLI or management interface.

Q3: Can I use this in an Adtran 10G SFP+ port? A: Yes, most Adtran SFP+ ports are backward compatible. After inserting the 1442340G1 compatible module, the port will typically auto-negotiate to 1000Mbps (Gigabit) speed.

Q4: Do I need an optical attenuator for short fiber runs? A: For fiber links shorter than 5km, we recommend using a 10dB LC optical attenuator. This protects the sensitive receiver from the high-power 1310nm laser designed for 40km transmission.

Q5: Adtran 1442340G1 not working？ A:Follow these quick steps:

1. Check DDM: Run show transceiver detail on the switch. Look for Low Rx Power or faults.

2. Clean & Reseat: Clean the LC fiber connectors and firmly re-seat the SFP module.

3. Verify Fiber: Ensure you are using a single-mode (SMF) patch cable. Check for bends or breaks.

4. Swap Test: If possible, test the SFP in a different port or swap it with a known-working module to isolate the fault.

If DDM shows "Low Tx Power" or "Fault", the module is likely defective and needs replacement

Quality Assurance：Your Trusted Optical Transceiver Source

HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.

• Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.

• Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.

• Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.

• 24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.

Carrier-Grade Quality. Factory-Direct Control. Rapid Response.

Quality Certification & Compliance：

At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

• ISO 9001: Certified quality management and production consistency.

• CE,UL & FCC: Fully compliant for seamless Global Market Access.

• RoHS: Committed to environmental responsibility and hazardous material control.

• Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing：

   

100% 3rd Party Compatible：

Partial Test Demonstration: