Ruijie MINI-GBIC-LH40-SM1310 Compatible 1000BASE-EX SFP 1310nm 40km DDM Duplex LC/UPC SMF Optical Transceiver Module

The HYTOPTODEVICE Ruijie compatible 40km SFP is rigorously verified for seamless operation with:

• Ruijie RG-S Series Managed Switches: RG-S2910, RG-S5750, RG-S5760, RG-S6120, RG-S6220 series.

• Ruijie Core Switches: RG-N18000 (Newton) series, RG-S8600E series.

• Ruijie RG-AR Series Routers: AR2200, AR3200, AR7000 series.

• Ruijie Industrial Switches: Specific models requiring 1G SFP connectivity (Standard Temp).

• Campus-to-Campus Connectivity: Linking remote teaching buildings or campus branches up to 40km apart using single-mode fiber infrastructure.

• Regional Government Networks: Providing high-stability 1.25G fiber uplinks for municipal office networks where standard 10km (LX) reach is insufficient.

• Enterprise Video Backhaul: Extending fiber reaches for large-scale IP surveillance networks in industrial parks or transportation hubs.

FAQ for Ruijie MINI-GBIC-LH40-SM1310 Compatible SFP Transceiver:

Q1: Is the HYTOPTODEVICE module recognized by Ruijie RGOS? A: Yes. Our modules are flashed with the correct Ruijie EEPROM signatures, ensuring they are identified as genuine by RGOS without "unrecognized" alarms or port-lock issues.

Q2: Does this 40km module support DDM/DOM? A: Absolutely. It features full Digital Diagnostic Monitoring (DDM), allowing you to monitor real-time metrics such as temperature, voltage, and optical tx/rx power via the Ruijie CLI (e.g., show transceiver interface).

Q3: Can I use this 1G module in a Ruijie 10G SFP+ port? A: Yes, most Ruijie 10G SFP+ ports are backward compatible. Simply insert the MINI-GBIC-LH40-SM1310 compatible module, and the port will typically auto-negotiate to 1000Mbps.

Q4: Do I need an optical attenuator for short fiber runs? A: For fiber links shorter than 5km, we recommend using a 10dB LC optical attenuator. This protects the sensitive receiver from being over-saturated by the high-power 1310nm laser.

Q5: Ruijie MINI-GBIC-LH40-SM1310  not working？ A:Follow these quick steps:

1. Check DDM: Run show transceiver detail on the switch. Look for Low Rx Power or faults.

2. Clean & Reseat: Clean the LC fiber connectors and firmly re-seat the SFP module.

3. Verify Fiber: Ensure you are using a single-mode (SMF) patch cable. Check for bends or breaks.

4. Swap Test: If possible, test the SFP in a different port or swap it with a known-working module to isolate the fault.

If DDM shows "Low Tx Power" or "Fault", the module is likely defective and needs replacement

Quality Assurance：Your Trusted Optical Transceiver Source

HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.

• Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.

• Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.

• Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.

• 24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.

Carrier-Grade Quality. Factory-Direct Control. Rapid Response.

Quality Certification & Compliance：

At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

• ISO 9001: Certified quality management and production consistency.

• CE,UL & FCC: Fully compliant for seamless Global Market Access.

• RoHS: Committed to environmental responsibility and hazardous material control.

• Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing：

   

100% 3rd Party Compatible：

Partial Test Demonstration: