• D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE

D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T Module 100m, Bulk Wholesale | HYTOPTODEVICE

Source D-Link DGS-712 compatible Copper RJ45 transceiver from HYTOPTODEVICE factory. This 1G SFP 1000BASE-T copper module supports 100m Cat5e/Cat6 links for D-Link gigabit switches. Bulk wholesale, sample evaluation and flexible MOQ available for network distributors, integrators and bulk buyers.
NO. Brand  Compatible P/N Transceiver Type
1 Aruba  SFP-TX SFP-GIG-T 
2 Avaya 700283872 SFP-GE-T-I
3 D-link  DGS-712 10/100/1000BASE-T
4 DELL  310-7225 SFP-10G-T-30
5 Extreme  MGBIC-02 SFP-10G-T-30I 
6 F5 Networks  F5-UPG-SFPC-R   SFP-10G-T-80
7 Fortinet  FN-TRAN-GC SFP-10G-T-100
8 H3C  SFP-GE-T
9 HPE BladeSystem  453154-B21
10 Netgear  AGM734 
11 Nortel  AA1419043-E6
Description

D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE D-Link DGS-712 compatible Copper RJ45 transceiver delivers reliable 1000BASE-T gigabit Ethernet transmission over twisted-pair copper cabling. This hot-swappable SFP mini-GBIC copper transceiver fitted with RJ45 port supports up to 100-meter transmission for D-Link office, SMB and campus network upgrades. Designed following IEEE 802.3ab and SFP MSA standards, pre-flashed DGS-712 EEPROM enables automatic identification within D-Link switch operating systems without unsupported transceiver warning prompts. This Copper RJ45 transceiver operates fixed 1000Mbps only and cannot auto-negotiate down to 100M/10M speeds. HYTOPTODEVICE manufactures this SFP copper RJ45 transceiver for network wholesalers, system integrators and volume buyers.

Key Technical Specifications

 D-Link   Compatible DGS-712  Vendor Name HYTOPTODEVICE
Form Factor SFP  Data Rate 1000Mbps
Connector RJ-45 Cable Distance 100m
Media Copper Cable Type Cat 5e/6/6a (UTP)
Max. Power Consumption ≤1.2W DDM Support YES
Protocols MSA Compliant, IEEE STD 802.3 and 802.3ab Operation Temperature 0 to 70°C (32 to 158°F)

  For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

1. Cabling Requirement

  • Standard: Cat5e or Cat6 twisted-pair cable is required to achieve full 100-meter Gigabit performance.

  • Note: Standard Cat5 cable may limit link stability at full 1G speed and is not recommended.

2. Hot-Plug Support

  • Live Insertion: The SFP RJ45 transceiver supports live insertion and removal.

  • Precaution: Avoid repeated hot swapping under continuous heavy traffic loads to ensure optimal hardware longevity.

3. Thermal Management

  • Heat Dissipation: This 1Gbps copper module generates mild heat during operation.

  • Deployment Advice: Verify the switch thermal budget and ensure adequate ventilation before fully populating all SFP ports.

4. Speed Limitation

  • Fixed Rate: This RJ45 transceiver operates at a fixed 1000Mbps speed only.

  • Compatibility Warning: It cannot auto-negotiate down to 100Mbps or 10Mbps. The connected peer device must support 1G speed to successfully establish a link.

5. Storage & Maintenance

  • Storage Environment: Keep unused transceivers stored in dry, ESD-safe packaging.

  • Dust Protection: Always fit dust caps onto the RJ45 port when the module is not in service.

For detailed operation instructions, please refer to the User Guide.

Full Compatibility List & Firmware Adaptation

1. Validated Target Hardware & Firmware

This 1000BASE-T SFP copper transceiver uses DGS-712 matched EEPROM programming for seamless plug-and-play detection without transceiver warning alerts. All modules pass end-to-end traffic testing and maximum distance validation before delivery:
  • D-Link DGS Series Switches: DGS-1210, DGS-1510, DGS-3130
  • D-Link DES stackable enterprise switch platforms
  • Any network hardware fitted with standard SFP ports supporting 1000BASE-T

2. Multi‑Brand Cross Interoperability

Built on SFP MSA and IEEE standards, this copper RJ45 transceiver also works with Cisco, Arista, MikroTik, Avaya Nortel and other mainstream network hardware, ideal for mixed-vendor legacy network upgrade projects.

3.Value-Added Services

HYTOPTODEVICE provides free custom EEPROM programming, pre-sales technical consultation, test sample support, custom labeling and packaging services for wholesalers, integrators and bulk buyers working on 1000BASE-T SFP copper deployments.


Primary Application Scenarios

  • Enterprise access layer fixed gigabit copper connections
  • D-Link DGS series switch 1000BASE-T Copper RJ45 transceiver uplink deployment
  • Server NIC to top-of-rack access switch short copper patch links
  • Legacy network upgrades converting SFP slots to fixed-rate RJ45 gigabit ports
  • Office LAN, IP camera and storage gigabit connections (endpoints must support 1G)


Connectivity Solutions(Applications)

1. 1G to 1G for Switch-Switch

2.1G Connectivity with Switch-NIC


3.1G Structured Cabling Connectivity



The Core Features

1.Low power design for reliable 1G copper connectivity.

These low-power SFP transceivers deliver stable 1G copper connectivity, perfectly suited for Gigabit Ethernet deployments in data centers.
1000BASE-T SFP transceiver, low power, 1G copper connectivity for data center Gigabit Ethernet networking


2.Tested in Host Devices for Proven Interoperability

Each RJ45 transceiver module undergoes host device testing to deliver proven interoperability with mainstream switches and routers. Specific Compatibility Video available upon request.

1000BASE-T SFP transceiver, fully tested on host devices for proven interoperability with mainstream network hosts

3. Full-Range Quality Inspection

Full-process quality control and multi-stage inspection are implemented to secure stable and consistent module performance before shipment.Curious how? Tour the Test Center.
000BASE-T SFP transceiver with comprehensive quality management and multi-stage inspection for reliable performance


FAQ

Q1: How does 1000BASE-T handle heavy, multi-user network congestion?

A: 1000BASE-T can handle multi-user congestion effectively within its gigabit bandwidth limit. HYTOPTODEVICE D-Link DGS-712 compatible Copper RJ45 transceiver supports standard Ethernet flow control to reduce packet loss during traffic spikes. When total aggregate traffic exceeds 1Gbps per port, queuing delays will appear, so proper QoS configuration is recommended for busy SMB networks.

Q2: Is 1000BASE-T sufficient for heavy 4K/8K video editing and transfer workflows?

A: 1000BASE-T works for 4K media transfer but becomes the bottleneck for heavy 8K raw video workflows. Our HYTOPTODEVICE Copper RJ45 transceiver delivers steady 1Gbps throughput, which fits compressed 4K file sharing. Uncompressed 8K media requires higher-speed links like 10G for smoother editing workflows.

Q3: Will my Wi-Fi 6/7 access points bottleneck if connected via 1000BASE-T ports?

A: Yes, 1000BASE-T will create a bottleneck for Wi-Fi 7 APs under full load. HYTOPTODEVICE D-Link compatible Copper RJ45 transceiver provides up to 1Gbps bandwidth. Single Wi-Fi 7 AP can easily exceed 1Gbps total throughput, so 10G uplink is preferred for high-density wireless deployments. For Wi-Fi 6 and low-user sites, 1G remains acceptable.

Q4: Can 1000BASE-T handle synchronous upload and download speeds simultaneously?

A: Yes, 1000BASE-T supports full-duplex bidirectional transmission at the same time. This HYTOPTODEVICE Copper RJ45 transceiver operates in full-duplex mode, enabling 1Gbps upload and 1Gbps download concurrently on one twisted pair cable. Total theoretical aggregate bandwidth reaches 2Gbps.

Q5: Is 1000BASE-T future-proof for upcoming smart office automation demands?

A: 1000BASE-T remains adequate for most smart office IoT devices, though it is not fully future-proof for high-bandwidth applications. HYTOPTODEVICE Copper RJ45 transceiver is ideal for IP cameras, sensors and office endpoints. For mass high-speed workstation links, planning an upgrade path to 10G is recommended for long-term office expansion.

Q6: What is the maximum cable length supported by 1000BASE-T without signal degradation?

A: The standard maximum reach for 1000BASE-T is 100 meters over Cat5e or Cat6 UTP. This HYTOPTODEVICE D-Link DGS-712 compatible Copper RJ45 transceiver follows IEEE specs. Running cables longer than 100m will cause signal attenuation, rising BER and frequent link flapping.

Q7: Is shielded cabling (STP) strictly required, or is unshielded (UTP) sufficient?

A: Unshielded Cat5e/Cat6 UTP cabling is sufficient for normal indoor environments. STP shielded cable is only mandatory in high EMI industrial or heavy machinery rooms. Our HYTOPTODEVICE Copper RJ45 transceiver works reliably with standard UTP in typical SMB office LAN deployments.

Q8: Will my older 10/100 devices work seamlessly on a 1000BASE-T switch?

A: Older 10/100Mbps devices can connect but this HYTOPTODEVICE Copper RJ45 transceiver only runs fixed 1000Mbps. Since this module does not auto-negotiate down, the connected switch port must support speed negotiation to 10/100 to communicate with legacy fast ethernet hardware.

Q9: Are pre-made patch cables better than field-terminated cables for Gigabit speeds?

A: Factory pre-made patch cables generally deliver more stable gigabit performance. Field-terminated cables are prone to wiring errors and crosstalk if crimped improperly. When paired with HYTOPTODEVICE Copper RJ45 transceiver, certified pre-assembled Cat5e/Cat6 patch cords reduce troubleshooting work.

Q10: Is it cheaper to buy separate 1G switches or a single high-density modular switch?

A: For small networks, standalone 1G fixed switches have lower upfront cost. Large or growing sites benefit more from one high-density modular switch with SFP slots that accept HYTOPTODEVICE Copper RJ45 transceivers, reducing total hardware and management overhead in the long run.

Q11: Do I need advanced IT skills to configure a 1000BASE-T switch?

A: Basic deployment requires only fundamental networking knowledge. Unmanaged D-Link switches with HYTOPTODEVICE Copper RJ45 transceivers work plug-and-play. Managed switches need basic VLAN and QoS setup, which does not demand expert-level IT training for SMB administrators.

Q12: How does VLAN configuration impact 1000BASE-T switch performance?

A: Properly configured VLANs have negligible impact on 1000BASE-T throughput. VLAN tagging is handled at the switch ASIC hardware level. Misconfiguration such as excessive broadcast domains or mis-matched trunk settings can trigger broadcast storms and degrade links using HYTOPTODEVICE Copper RJ45 transceivers.

Q13: What kind of cooling or ventilation do high-density 1000BASE-T rack switches require?

A: High-density rack switches need adequate front-to-back airflow and proper rack ventilation. Each HYTOPTODEVICE Copper RJ45 transceiver only consumes ~1.2W and generates minimal heat, but fully populated switch racks still require fans and unrestricted air circulation to avoid thermal throttling.

Q14: How do network loops occur in 1000BASE-T networks, and how are they prevented?

A: Network loops form when two or more redundant paths exist between switches without loop protection. STP/RSTP protocols detect and block redundant links automatically. Even with HYTOPTODEVICE Copper RJ45 transceivers installed, enabling spanning tree on managed switches stops broadcast loops and network outages.

Q15: What kind of manufacturer warranty and technical support do top-tier 1000BASE-T vendors offer?

A: Reputable vendors typically provide multi-year hardware warranty plus optional technical support packages. HYTOPTODEVICE supplies 1000BASE-T Copper RJ45 transceivers with quality warranty, batch test reports and pre/post sales technical support for wholesalers, integrators and bulk buyers.

Q16: Is firmware updates easy and safe to perform on modern managed Gigabit switches?

A: Firmware updates are simple and low-risk if following official operation guides. Always back up switch configurations before upgrading. HYTOPTODEVICE Copper RJ45 transceivers do not require firmware updates themselves; compatibility depends entirely on the host D-Link switch firmware version.


Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging


Why Network Engineers Choose HYTOPTODEVICE


HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order 


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.


hytoptodevice 10g sfp+ bidi transceiver testing certification

Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice testing devices for compatibility of sfp+ bidi 10g optical module


  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE
  • D-Link DGS-712 Compatible Copper RJ45 Transceiver | SFP 1000BASE-T  Module 100m, Bulk Wholesale | HYTOPTODEVICE

Download