Arista Compatible SFP-10G-LXRBD-D 10G BiDi SFP+ Transceiver Module 10GBASE-BX20-D (SMF, 1330nm-TX/12730nm-RX, 20km, LC, DDM)
Product Overview
The Arista matching SFP-10G-LXRBD-D optical transceiver comes equipped with a simplex LC port and sustains reliable 20km signal transmission across G.652 single-mode fiber lines. This 10G BiDi SFP+ module enables bidirectional 10G data flow through only one individual fiber strand, cutting physical cabling expenditure and maximizing utilization of existing fiber infrastructure resources. Manufactured entirely by HYTOPTODEVICE, this 10GBASE-BX20-D 10G BiDi SFP+ module complies fully with SFP+ MSA, IEEE 802.3ae and SFF-8431 industry standard specifications. Supporting DDM/DOM, It delivers stable plug-and-play interoperability with Arista EOS platforms alongside more than mainstream third-party network hardware. ideal for colocation datacenters, multi-building enterprise campus uplinks, metro cloud interconnection and remote branch cloud backhaul deployments.
Key Technical Specifications
| Arista Compatible |
SFP-10G-LXRBD-D |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
TX1330nm/RX1270nm |
Max Distance |
20km |
| Connector |
Simplex LC |
Transmitter Type |
1330nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-3.0~+2.0dBm |
Receiver Sensitivity |
< -14.4dBm |
| Max. Power Consumption |
≤1W |
DDM/DOM |
Support |
| Protocols |
10G Ethernet, MSA Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Operational Best Practices
•
BiDi Pairing Rule: SFP‑10G‑BXD (Tx1330/Rx1270) must pair with
SFP‑10G‑BXU (Tx1270/Rx1330) at remote end. Two BXD modules will NOT form a valid link.
•
Cabling Requirement: Use OS2 single‑mode simplex‑LC UPC cables only. Multimode fiber / APC connectors reduce reach and cause link issues; keep connectors clean.
•
Port Notice: Install only into standard SFP+ ports. Do not force into 1G‑SFP slots. Disable transceiver‑block policy if needed on host devices.
•
Environment: Run within 0‑70 °C. Avoid high‑heat, dusty, poorly ventilated rack positions.
•
Hot‑swap: Supports hot‑swap; disconnect fiber before plugging / unplugging to protect optical ports.
•
DDM Monitoring: Enable DDM/DOM; monitor optical power and temperature for early fault warning.
•
Pre‑test Recommendation: Test sample units with real hardware before large‑scale bulk deployment.
•
Laser Safety: Avoid direct eye exposure to powered optical ports; infrared laser can harm eyes.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Multi-Brand Supported Network Hardware
1.Arista Exclusive Compatible Hardware & Validated Switch Series
Our zero-error plug-and-play 10G BiDi SFP+ module is preloaded with authentic Arista standard EEPROM identification coding, eliminating unrecognized module warning alerts after full physical real-switch insertion validation across all listed hardware:
-
Arista 7050 Series Switches: 7050QX, 7050SX, 7050TX, and 7050X3 Series high-density leaf/spine switches.
-
Arista 7150 Series Ultra-Low Latency Switches: 7150S-24, 7150S-52, and 7150S-64.
-
Arista 7280 Series Routing Platforms: 7280SE, 7280SR, and 7280TR network edge and data center interconnect switches.
-
Arista 7300 Series Modular Switches: 7300X and 7320X series line cards featuring 10G SFP+ slot densiti
All Arista EOS-based hardware auto-detects our 10G BiDi SFP+ Module without extra configuration scripts or unlock comman
2.Cross‑Brand Interoperability
Built on MSA open standards, this 10G BiDi SFP+ works with Cisco, Huawei, H3C, Juniper, Dell, Palo Alto, Brocade hardware. Well‑suited for mixed‑vendor metro and DCI expansion projects for enterprise, carrier clients, wholesalers and integrators.
Primary Application Scenarios
- Colocation Datacenter Single Fiber Uplink Upgrade: Mass deployment of SFP-10G-LXRBD-D 10G BiDi SFP+ Module to reuse existing single fiber strands and eliminate new cabling construction costs between rack switches and core layers
- Multi-Building Enterprise Campus Cloud Interconnection: Cost-efficient simplex LC 10G BiDi SFP+ Module for 20km inter-building 10G uplinks between Arista core switches
- Metro Cloud ISP Fiber Access Network: Bulk supply of 10G BiDi SFP+ Module for business broadband and cloud client single-fiber backhaul links
- Small & Medium Cloud Datacenter Leaf-Spine Inter-Switch Links: High-density single strand 10G BiDi SFP+ Module to conserve limited fiber port resources
- Cloud System Integrator Turnkey Network Projects: OEM-branded SFP-10G-LXRBD-D 10G BiDi SFP+ Module bulk delivery for global datacenter importer enterprise cloud projects
Connectivity Solutions(Applications)
1.10G Switch-to-Switch Interconnection Layout:

2.10G Switch-to-NIC Server Uplink Layout:

3.10G Standardized Structured Cabling Rack Layout:

The Core Features
1.Slash Cabling Costs with Single-Fiber BiDi
Stop paying for extra optical fibers. Our 10G BiDi SFP+ transceivers send and receive data over one single strand of fiber, helping you slash cabling infrastructure costs while fully utilizing your current deployment.

2.Instantly Double Your Bandwidth
Run out of fiber lines? No problem. By separating transmit and receive wavelengths on a single strand, this module instantly doubles your network capacity without requiring you to pull any new cables.

3.1W Low-Power 10G Link
Power consumption matters in high-density data centers. Featuring a highly efficient design, this 10G SFP+ module operates at under 1W, minimizing heat generation and lowering your overall operational and cooling costs.

4.Seamless Cross-Brand Interoperability
Eliminate compatibility headaches. We test every single module in actual, real-world mainstream switches to guarantee flawless cross-brand interoperability. Want proof? Specific Compatibility Video available upon request.

5.Rigorously Tested for Zero-Downtime Reliability
We don’t compromise on network uptime. Through comprehensive testing—including temperature, signal integrity, and optical power analysis—before leaving our Test Center. we ensure your 10G BiDi 20km links remain rock-solid and packet-loss-free.

FAQ
Q1: Can Tx1330/Rx1270 20km 10G BiDi SFP+ module access complete DOM data via native Arista EOS CLI?
A: Yes,All HYTOPTODEVICE 10G BiDi SFP+ module fully supports standard DOM digital monitoring. Network admins check real-time optical power, temperature and voltage directly through Arista’s built-in show interfaces transceiver detail command.
Q2: Is single-fiber Arista-matched 10G BiDi SFP+ module capable of auto-negotiating down to legacy 1G Ethernet bandwidth?
A: Yes, This HYTOPTODEVICE 10G BiDi SFP+ module is locked at fixed 10GBASE speed. It cannot downgrade to 1G or 100M legacy network rates and only works under 10G Ethernet transmission.
Q3: Is factory-tested Arista coded 10G BiDi SFP+ module stable enough to replace genuine Arista original optical hardware?
A: Yes, HYTOPTODEVICE 10G BiDi SFP+ module adopts high-grade optoelectronic chips consistent with OEM standards. Every unit undergoes full real Arista switch aging verification with independent serial numbers, securing stable 99.9% long-term network operation.
Q4: Does commercial simplex LC 10G BiDi SFP+ module meet international environmental and laser safety certification standards?
A: Yes, Our HYTOPTODEVICE 10G BiDi SFP+ module strictly complies with SFP+ MSA, CE, FCC, RoHS and IEC 60825-1 laser safety norms, satisfying global enterprise network deployment green and safety regulations.
Q5: Can Arista customized Tx1270/Rx1330 10G BiDi SFP+ module fit into traditional 1G-only SFP hardware slots?
A: No, The HYTOPTODEVICE 10G BiDi SFP+ module relies on dedicated 10G SFP+ chip architecture. It is electrically incompatible with 1G SFP slots and cannot be recognized or activated on 1G switches.
Q6: Can Arista pre-programmed 10G BiDi SFP+ module Tx1330/Rx1270 run normally on Cisco, Juniper and other third-party brand switches?
A: This HYTOPTODEVICE 10G BiDi SFP+ module is pre-flashed with exclusive Arista identification codes. To avoid alarm logs on Cisco/Juniper devices, select our brand-customized BiDi modules matching your target switch brand.
Q7: What peak power draw will high-density rack deployed 20km 10G BiDi SFP+ module generate during continuous operation?
A: HYTOPTODEVICE optimized the power circuit of this 10G BiDi SFP+ module, with maximum power consumption controlled below 1.5W, effectively lowering heat accumulation in densely packed Arista switch cabinets.
Q8: Is single-mode simplex 10G BiDi SFP+ module Tx1330/Rx1270 suitable for SDH and SONET telecom transmission backbone systems?
A: HYTOPTODEVICE 10G BiDi SFP+ module is exclusively calibrated for IEEE 802.3ae 10G Ethernet and fiber channel networks, not optimized for SDH/SONET telecom signal transmission.
Q9: Which fiber end-face polishing type matches 20km Arista compatible 10G BiDi SFP+ module simplex LC port?
A: HYTOPTODEVICE 10G BiDi SFP+ module adopts standard blue LC/UPC simplex interface. Green angled LC/APC patch cords are forbidden, as they trigger severe optical attenuation and link failure.
Q10: Why does Arista switch port light up for paired-wavelength 10G BiDi SFP+ module yet fail to receive any data traffic?
A: If HYTOPTODEVICE 10G BiDi SFP+ module shows link light without packet reception, issues usually stem from misconfigured MTU, STP port blocking or inconsistent VLAN tagging on the Arista interface.
Q11: Why does this SFP-10G-LXRBD-D 10G BiDi SFP+ Module require a matching LXRBU-D counterpart for single fiber links?
A: This SFP-10G-LXRBD-D 10G BiDi SFP+ Module transmits optical signals at 1330nm and receives 1270nm wavelength; it must pair with SFP-10G-LXRBU-D 10G BiDi SFP+ Module (reverse wavelength scheme 1270nm-TX/1330nm-RX) to achieve interference-free full-duplex single-strand fiber transmission. We offer special pair discounts for bulk orders of the 10G BiDi SFP+ Module.
Q12: Can I order large quantities of the SFP-10G-LXRBD-D 10G BiDi SFP+ Module with custom OEM branding for my datacenter import distribution business?
A: We support full OEM customization for bulk orders over 500pcs of the 10G BiDi SFP+ Module, including custom part number stickers, private brand logo printing and neutral export cartons for datacenter importers and distributors sourcing an Arista SFP-10G-LXRBD-D alternative 10G BiDi SFP+ Module.
Packaging & Custom OEM Solutions
Each module ships individually sealed in ESD-safe packaging, protected from static from our warehouse to your shelf—and ready to ship on receipt of order. Volume buyers and system integrators also unlock our full OEM program: custom logos, private labeling, and branded packaging, all designed to help you build and protect your own brand.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

Others


