Arista Networks CAB-SFP-SFP-1M Compatible 10G SFP+ DAC Cable 1m (3ft) Passive Direct Attach Copper Twinax Cable-HYTOPTODEVICE

The HYTOPTODEVICE SFP-10G-C1M 10G SFP+ DAC cable is pre-programmed and 100% traffic-tested to work seamlessly with:

• Alcatel-Lucent OmniSwitch Series: 6860, 6860E, 6900, 9900, and 6450 series.

• Nokia 7750 Service Router (SR): Specific SFP+ ports requiring standard 10G DACs.

• Alcatel-Lucent Enterprise (ALE) Chassis: Supporting high-density 10G aggregation modules.

• OmniSwitch Virtual Chassis Stacking: Implementing high-speed stacking between OmniSwitch units in the same rack for simplified management.

• Server-to-Switch Interconnect: Low-latency 10G connectivity for enterprise servers and Network Attached Storage (NAS).

• Data Center Leaf-Spine Short-Reach Links: Cost-effective patching for 10Gbps uplinks over 1-meter distances.

• Energy-Efficient Network Upgrades: Reducing the total cost of ownership (TCO) by eliminating the power and cost overhead of optical transceivers

 Connectivity Solutions(Applications)：

Scenarios 1:10G-to-10G Link for Switch-to-Switch

Scenarios 2:10G-to-10G Link for Switch-to-Server

FAQ for Arista Networks CAB-SFP-SFP-1M Compatible 10G SFP+DAC Cable

Q1:Is the HYTOPTODEVICE DAC-SFP-10G-1M plug-and-play on brand switches? A:Yes. brand-specific EEPROM code was pre-programmed to HYTOPTODEVICE 10g sfp+dac cable. Your switch will recognize it as "SFP-10G-C1M" and operate normally without any warns.

Q2:Can I use this 10G DAC in an SFP28 (25G) or QSFP+ (40G) port?A:Most SFP28 ports  and QSFP+are backward compatible with 10G SFP+ DACs. However, it cannot be used directly in a 400G or 40G QSFP port without a proper adapter (like a QSA adapter).

Q3:What is the benefit of Passive DAC over Active Optical Cables (AOC)? A: Passive DAC and Active AOC can transmit data in short distance. With zero power consumption, higher reliability and lower cost, passive DAC has more advantages over AOC in short distance like 1 meter. 

Q4:Is the HYTOPTODEVICE compatible with Arista 10g sfp+dac?A:Yes. HYTOPTODEVICE is professional in optical communication.Equipped with various switches,such as Cisco,NVIDIA,Arista,Juniper. we specialize in coding equipment for various brands to ensure they are recognized and running in all kinds of devices.

Q5:Does 10G DAC use Multi-mode or Single-mode fiber?A:Neither. The DAC(Direct-Attach Copper) is a copper cable. using a twinaxial copper architecture (Twinax) to transmit electrical signals directly, no light signals.There are not lasers or optical glass in DAC cable,  it is much cheaper than fiber optics.

Q6:Where to buy 10G SFP+DAC cable?A:There are many factories that produce and sell  passive DAC, but DAC manufacturer china HYTOPTODEVICE is the excellent provider: a source factory, fully controllable process, reliable performance, 100% compatible, sufficient inventory, fast delivery, and quick response.

Q7:Is 10G SFP+ to SFP+DAC hot-swappable?A:HYTOPTODEVICE SFP+10G DAC is hot-pluggable, hot Pluggable SFP+ Compliant.you can plug or unplug the passive DAC, while the device is powered on without damaging the hardware.

Q8:who makes the best SFP+DAC cable?A: Transceiver Manufacturer China HYTOPTODEVICE is the excellent provider.Sorce factory,reliable quality, 100% compatibiltiy.fast delivery and quick response.HYTOPTODEVICE send a tool that allows you to re-program the compatibility of your cables yourself.

Q9:What is the maximum distance for a 10G DAC？A: Passive DAC cables directly transmit electrical signals with copper cable. it is suitable for short distances are limited to 7 meters (approx. 23 feet). Beyond the 7m distance, the electrical signal degrades too much.

Q10:What is the difference between "Passive" and "Active" DAC?There are distinct differences between Passive and Active DAC.The Passive DAC has no signal amplification. its lengths is under 5m. With zero power consumptions,it cost is cheaper. The Active DAC contains a chip to boost the signal. Used for slightly longer copper runs (up to 10m-15m) and is generally thinner/more flexible.

Q12:Can I plug a 10G DAC into a 1G SFP port?A:No. SFP+ (10G) ports can often accept 1G transceivers, but a 1G SFP port cannot scale up to recognize a 10G DAC cable. You should Make sure the cable speed matches the port with the lowest rated speed.

Quality Assurance：Your Trusted Optical Transceiver Source

 HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.

• Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.

• Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.

• Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.

• 24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.

Carrier-Grade Quality. Factory-Direct Control. Rapid Response.

Quality Certification & Compliance：

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

• ISO 9001: Certified quality management and production consistency.

• CE & FCC: Fully compliant for seamless Global Market Access.

• RoHS: Committed to environmental responsibility and hazardous material control.

• Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing：

   

100% 3rd Party Compatible：

Partial Test Demonstration：

Others: