Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi Module 10GBASE-BX-D (SMF, 1330nm-TX/1270nm-RX, 10km, Simplex LC, DDM)
Product Overview
This Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module is 10GBASE-BX 10km OS2 SMF commercial indoor BiDi transceiver, a direct drop-in replacement for Juniper OEM optics. The Single fiber SFP+ 10G Upstream module delivers stable 10GBASE-BX transmission up to 10km over OS2 single-mode fiber with 1330nm-TX/1270nm-RX simplex LC interface.The compatible SFP+ 10G BiDi module always operate in pairs with matching complementary wavelengths. Compliant with Hot Pluggable SFP+ MSA, SFF-8472, IEEE 802.3ae and RoHS standards, Featuring real-time DDM monitoring, low power consumption and high speed, the MSA compliant SFP+ 10G BiDi module is ideal for enterprise campus inter-building uplinks, metro ISP fiber backhaul, remote office interconnection and Radio & Baseband Units, etc. We support samples, bulk wholesale and OEM private labeling, submit bulk inquiry or RFQ for competitive pricing and long-term supply contracts.
Key Technical Specifications
Each HYTOPTODEVICE SFP+ 10G BiDi Module undergoes multi-stage factory quality control prior to shipment, including optical power calibration, continuous traffic load aging testing, bit error rate screening and physical plug-in validation on genuine Juniper production switches. Premium DFB laser transmitters and PIN photodiode receiver chips deliver low signal attenuation and stable long-term laser performance, while built-in power regulation circuits prevent receiver burnout on ultra-short fiber patch cords. All hardware parameters align 1:1 with official Juniper JNP-SFP-10G-BX10D design requirements and global industry compliance frameworks.
| Juniper Compatible |
JNP-SFP-10G-BX10D |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP+ |
Max Data Rate |
10.7Gbps |
| Wavelength |
TX1330nm/RX1270nm |
Max Distance |
10km |
| Connector |
Simplex LC |
Transmitter Type |
1330nm DFB |
| Cable Type |
SMF |
Receiver Type |
PIN |
| TX Power |
-5.0~0dBm |
Receiver Sensitivity |
< -14.4dBm |
| Max. Power Consumption |
≤1W |
DOM/DDM |
Fully Supported |
| Protocols & Standards |
SFP+ MSA, SFF-8472, IEEE 802.3ae, RoHS Compliant |
Operation Temperature |
0 to 70°C (32 to 158°F) |
Critical Pairing Guidance
As a unidirectional fixed-wavelength bidirectional optic, this HYTOPTODEVICE SFP+ 10G BiDi Module cannot form functional full-duplex links when paired with an identical TX1330/RX1270 module. It must be matched with the complementary JNP-SFP-10G-BX10U variant (1270nm-TX / 1330nm-RX) at the opposite fiber termination point to separate upstream and downstream signal wavelengths and avoid complete link failure. HYTOPTODEVICE provides exclusive bundled discount pricing for paired bulk orders of matching BiDi transceiver sets, ideal for system integrators completing campus and ISP network turnkey projects. Custom long-distance 20km, 40km and 60km BiDi module variants are available upon OEM bulk order quote request for specialized extended-span networking deployments.
The Required Matching Pair here: 10G SFP+ BiDi Tx 1270nm / Rx 1330nm 10km module
Full Compatibility List & Supported Network Hardware
1.Juniper Networks Native Compatibility
This HYTOPTODEVICE SFP+ 10G BiDi Module delivers automatic, alarm-free plug-and-play recognition on all Juniper Junos networking hardware officially certified for the JNP-SFP-10G-BX10D transceiver specification. No manual port configuration adjustments, firmware patches or vendor license overrides are necessary, and all embedded DDM DOM monitoring functions operate natively via Juniper Junos CLI and web-based device management portals. Fully compatible Juniper device product lines:
- Juniper EX Series Campus Switches: EX4300, EX4600, EX9200 Layer 3 Access & Aggregation Series
- Juniper QFX Data Center Switches: QFX5100, QFX5200, QFX10000 Switch Fabric Series
- Juniper MX Universal Service Routers: MX104, MX240, MX480, MX960 Metro Backhaul Series
- Juniper Fiber Access Transport Platforms: ACX5448 Edge Networking Hardware
2.Multi-Brand Cross Compatibility
This HYTOPTODEVICE SFP+ 10G BiDi Module maintains robust cross-vendor interoperability to support mixed-brand indoor network architectures commonly seen in enterprise campus renovations, multi-site corporate WAN deployments and regional ISP central office construction projects. Stable signal transmission is verified across the following third-party network equipment brands:
- Cisco, Arista, H3C
- Huawei, Mikrotik, Dell PowerSwitch
- Fortinet, Brocade, Ubiquiti
HYTOPTODEVICE’s in-house engineering team provides complimentary remote technical debugging, transceiver vendor ID coding and re-programming services to resolve cross-brand hardware adaptation issues for bulk order clients and formal long-term supply contract partners. Custom identification data rewriting eliminates unrecognized transceiver error alerts on non-Juniper switch operating systems.
Primary Application Scenarios
This cost-optimized single-strand HYTOPTODEVICE SFP+ 10G BiDi Module addresses fiber resource shortage pain points across the full spectrum of indoor enterprise, data center and carrier-grade networking projects, lowering total capital expenditure for global system integrators, regional ISP stock distributors and internal enterprise IT procurement teams:
-
High-Speed Inter-Building Campus Links: Seamlessly connects adjacent structures or campus floors over localized distances up to 10km using single-strand single-mode infrastructure.
-
Data Center Leaf-Spine Distribution: Safely bridges high-speed enterprise servers and access layer structures to central core network fabrics.
-
Enterprise Edge Aggrigation: Ideal for expanding core enterprise capacities from 1G paths to high-performance 10G links without laying new physical fiber backbones.
-
FTTx Local Access Loops: Deployed inside regional distribution loops where saving fiber strand availability is critical.
Connectivity Solutions(Applications)
1.10G Switch-to-Switch Interconnection
Pair matched BiDi modules between core and access Juniper switches for low-cost single-fiber uplinks, saving limited fiber resources for campus and data center expansion.
2.10G Switch-to-NIC Direct Connection
Create point-to-point simplex fiber links between Juniper switches and server SFP+ NICs to eliminate gigabit bandwidth bottlenecks for storage and cloud workloads.
3.10G Structured Cabling Rack Layout
Fits standard OS2 simplex single-mode structured wiring, enabling unified end-to-end 10G transmission across access, aggregation and core layers for offices and ISP central offices.
FAQ
Q1: Can HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module run inside SFP28 25G or SFP+ 10G ports locked to 1G fixed speed?
A: The HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module cannot work properly in ports hard-set to 1Gbps. Our SFP+ 10G BiDi transceiver is engineered exclusively for 10G Ethernet transmission. Locking switch ports to 1G will trigger protocol incompatibility, port initialization errors and unrecognized module alerts on Juniper and other mainstream brand network switches.
Q2: Is cross-range interconnection allowed between HYTOPTODEVICE SFP+ 10G BiDi 10km transceiver and 10G BiDi 20km modules when transmit and receive wavelengths match exactly?
A: We strongly discourage pairing the HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi 10km module with 20km BiDi transceivers even with identical wavelength pairs. The two variants feature distinct laser calibration values and optical power budgets. Mismatched power levels will create severe signal imbalance, excessive fiber attenuation and unstable bidirectional network links during on-site deployment.
Q3: What maximum optical loss budget (dB) can the HYTOPTODEVICE Juniper compatible SFP+ 10G BiDi 10km transceiver withstand for stable single-fiber transmission?
A: The HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module comes with industry-standard 10km-grade optical power budget fully compliant with original Juniper hardware specs. It reserves sufficient loss margin to maintain flawless data transmission within the rated 10km distance under standard enterprise fiber cabling environments.
Q4: Does the 10km transmission rating of HYTOPTODEVICE SFP+ 10G BiDi module factor in real-world fiber splices, patch panel insertion loss and tight fiber bending attenuation?
A: The labeled 10km distance rating of HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module is calculated based on actual field deployment conditions. Our engineering team accounts for signal loss generated by fiber splicing points, patch panel connectors and minor fiber bends, instead of ideal lab testing environments, guaranteeing consistent link performance for field network projects.
Q5: What return and warranty coverage does HYTOPTODEVICE offer for bulk SFP+ 10G BiDi modules with high FOA (Failure On Arrival) rates upon customer receipt?
A: HYTOPTODEVICE delivers full after-sales warranty protection for our Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module batches. If customers receive bulk orders suffering high factory-originated FOA defects, we provide free full replacements, complete order refunds and complimentary professional optical testing services. Our warranty covers all non-man-made hardware failures to fully safeguard buyers’ procurement investments.
Q6: Will sustained high operating temperatures shift the laser wavelength of HYTOPTODEVICE SFP+ 10G BiDi 10km modules and trigger random intermittent link disconnections?
A: The HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module adopts industrial temperature-resistant laser chips plus built-in real-time thermal calibration circuits. Within the official operating temperature window, overheating will not cause laser wavelength drift. Even under long-duration heavy network loads, our transceiver holds steady wavelength output to eliminate temperature-caused link flapping and packet outages.
Q7: Does HYTOPTODEVICE’s Juniper matching SFP+ 10G BiDi transceiver support full DOM/DDM digital monitoring of transmit power, receive power, internal temperature and operating voltage?
A: Yes, the HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module is fully equipped with standard DOM/DDM digital optical monitoring functionality. Network technicians can pull real-time live data of TX optical power, RX optical power, internal module temperature and supply voltage, simplifying daily network monitoring and rapid fault troubleshooting workflows.
Q8: Does the HYTOPTODEVICE SFP+ 10G BiDi single fiber transceiver use standard LC Simplex connectors, or is SC fiber cabling required for normal operation?
A: The HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module adopts universal LC Simplex single fiber connectors, matching the original Juniper JNP-SFP-10G-BX10D hardware interface perfectly. No SC adapters or conversion cables are needed; the transceiver supports direct plug-and-play connection with mainstream single-fiber patch cords used in data center and enterprise network infrastructure.
Q9: What root cause leads to unidirectional random packet loss on HYTOPTODEVICE SFP+ 10G BiDi modules, such as severe upload packet drops with error-free download traffic?
A: One-way packet dropping (heavy upload loss, stable download throughput) on the HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module originates from mismatched transmit optical power between paired bidirectional transceivers. As single-fiber BiDi hardware relies on separated upstream and downstream wavelengths, uneven laser output power on the opposite end weakens upload signals while leaving the receive download channel unaffected.
Q10: Why is there such a large pricing gap between genuine OEM Juniper BiDi transceivers and cost-effective HYTOPTODEVICE compatible SFP+ 10G BiDi alternatives?
A: The significant price difference between original brand OEM transceivers and HYTOPTODEVICE Juniper JNP-SFP-10G-BX10D Compatible SFP+ 10G BiDi module comes from hefty manufacturer brand premiums, multi-level distribution markup and proprietary packaging costs on OEM hardware. As a specialized third-party optical transceiver supplier, HYTOPTODEVICE cuts unnecessary intermediate expenses while maintaining identical compatibility, performance and reliability as original modules, delivering budget-friendly fiber networking solutions for system integrators and bulk importers.
Q11: Are these Juniper compatible SFP+ 10G BiDi modules readily available in stock for immediate shipping during emergency network outages?
A: Yes. HYTOPTODEVICE maintains large ready stock of all standard SFP+ 10G BiDi Module variants, supporting fast expedited shipment to resolve urgent enterprise and ISP network outage recovery tasks globally.
Q12: Is the laser classified as Class 1 (Eye Safe) under IEC 60825-1 regulations?
A: Yes. All laser components integrated into HYTOPTODEVICE Compatible SFP+ 10G BiDi Module comply fully with IEC 60825-1 standards and carry official Class 1 eye-safe optical emission certification for indoor engineering use.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.
Rigorous Industrial Product Testing
100% 3rd Party Compatible
Partial Test Demonstration
Others
