• HYTOPTODEVICE compatible QSFP+ 40G CSR4 400m OM4 4x10G breakout transceiver
  • 40GBASE-CSR4 850nm QSFP+ 40G CSR4 module fix  unsupported transceiver error
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver module 400m
  • HYTOPTODEVICE Long range 400m QSFP+ 40G CSR4 MPO-12 transceiver  drop-in replacement
  • HYTOPTODEVICE compatible QSFP+ 40G CSR4 400m OM4 4x10G breakout transceiver
  • 40GBASE-CSR4 850nm QSFP+ 40G CSR4 module fix  unsupported transceiver error
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver module 400m
  • HYTOPTODEVICE Long range 400m QSFP+ 40G CSR4 MPO-12 transceiver  drop-in replacement

HPE H3C JG709A Compatible QSFP+ SR4 40G Transceiver Module | 40GBASE‑CSR4 850nm 400m MPO-12 Support 4x10G Breakout Connectivity Bulk Wholesale

Buy factory direct HPE H3C JG709A compatible QSFP+ 40G CSR4 transceiver. 40GBASE-CSR4 850nm module supports 300m OM3 / 400m OM4, MPO-12 connector and 4x10G breakout connectivity. Pre-flashed EEPROM resolves unsupported transceiver alerts and link flapping on HPE Comware switches. Bulk wholesale custom EEPROM for data center leaf-spine fabric and hybrid 10G/40G network upgrade.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-40G-CSR4 QSFP-40G-SR4(Cisco)
2 Alcatel-Lucent  QSFP-4X10G-SR  QSFP-40G-SR4(Huawei)
3 Arista  QSFP-40G-XSR4  QSFP-40G-SR4(Dell)
4 Dell 0MV31  QSFP-40G-IR4
5 H3C  QSFP-40G-CSR4-MM850 QSFP-40G-LG4
6 HPE Aruba  JH233A QSFP-40G-ER4
7 HPE H3C  JG709A QSFP-40G-ZR4
8 Huawei  QSFP-40G-eSR4 
9 Juniper  QFX-QSFP-40G-ESR4
10 NVIDIA(Mellanox)  MC2210411-SR4E
Description

HPE H3C JG709A Compatible QSFP+ SR4 40G Transceiver Module | 40GBASE‑CSR4 850nm 400m MPO-12 Support 4x10G Breakout Connectivity Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE HPE H3C JG709A compatible QSFP+ 40G CSR4 transceiver serves as direct drop-in replacement for original JG709A. Operating at 850nm with MPO-12 connector, it delivers 300m transmission over OM3 multimode fiber and up to 400m on OM4 fiber. It supports native 4×10G breakout connectivity for flexible hybrid network migration. Pre-programmed with HPE Comware specific EEPROM, this plug-and-play transceiver eliminates common transceiver warning alarms and unstable links. Built-in DDM monitoring and hot-swap capability guarantee reliable 24/7 operation for leaf-spine data center and enterprise network refresh. Bulk wholesale and custom EEPROM programming are available for system integrator and large enterprise projects.

Key Technical Specifications 

 HPE H3C  Compatible  JG709A  Vendor Name HYTOPTODEVICE
Form Factor QSFP+ Max Data Rate 42Gbps (4x 10.5Gbps)
Wavelength 850nm Max Distance 300m@OM4/400m@OM3
Connector MTP/MPO Transmitter Type VCSEL 850nm
Cable Type MMF Receiver Type PIN
TX Power -8.0~2.0dBm Receiver Sensitivity < -13dBm
Power Consumption ≤1.5W Modulation NRZ
Protocols 40G Ethernet, SATA/SAS3, IEEE 802.3ba, MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)


For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Choice: Only compatible with OM3 / OM4 multi‑mode MPO‑12 trunk cabling; single‑mode fiber cannot facilitate 850 nm SR4 operation and will produce link failure.

  • Distance Limit: Max 300m (OM3) / 400m (OM4). Dirty end faces, excessive splicing and sharp bending will reduce actual transmission distance.

  • Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.

  • Installation Specification: Hot‑plug supported; keep MPO connector end‑faces clean, observe minimum fiber‑bend radius requirements.

  • Breakout Configuration: Enable breakout mode via switch command line; do not mix 40G mode and breakout mode on the same port.
  • Operating Environment: Designed for commercial‑grade 0°C‑70°C ambient conditions; maintain adequate cabinet‑level airflow to prevent excessive module temperature build‑up.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List and Supported Devices 

1. Supported Hardware & Firmware

Pre-calibrated HPE Comware dedicated EEPROM ensures plug-and-play recognition, avoiding unrecognized port and link instability. All modules pass real-machine aging testing for mainstream HPE Comware platforms.

Validated HPE H3C Platforms:

  • HPE FlexFabric 5930 / 5940 / 5945 series data center switches
  • HPE 11900 series chassis core switches
  • HPE Comware 5520 / 5550 enterprise aggregation switches
  • All HPE hardware with native 40GBASE-CSR4 QSFP+ ports

2. Multi-Brand Cross Compatibility

Built to open MSA mechanical and electrical specifications, this compatible 40G QSFP+ CSR4 transceiver supports multi-vendor interoperability. It works reliably with Arista, Cisco, Dell, Brocade and other brands for hybrid data center fabric deployment.

3. Free Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility
  • Sample testing available before bulk orders for project validation
  • Private label customization and professional deployment guides
  • Rigorous batch quality consistency control
  • Custom EEPROM configuration for special and legacy network setups
  • Free EEPROM recoding with 24/7 technical support


Primary Application Scenarios

  • Data Center Leaf-Spine Fabric 400m OM4 extended reach supports long-distance cross-rack interconnection for HPE H3C data center fabric, delivering stable low-latency 40G transmission.
  • 10G/40G Hybrid Network Upgrade 4×10G breakout function enables flexible port splitting, reusing existing multimode fiber for staged network migration.
  • 40G High-Speed Trunk Aggregation Suitable for TOR-to-core uplink aggregation, carrying virtualization and cloud enterprise traffic.
  • HPE Comware Network Hardware Refresh Direct replacement for legacy JG709A modules, fixing transceiver recognition failures and link flapping.
  • Large-Scale Bulk Project Deployment MSA-compliant design fits multi-vendor hybrid networks for enterprise and operator data center bulk orders.

Connectivity Solutions(Applications) 

1.40GbE Switch-to-Switch Connectivity


2.40GbE Structured Cabling Interconnect

HYTOPTODEVICE 40G high‑speed stacking module for  enterprise campus network upgrade

3.40GbE Switch-to-NIC Interconnection

HYTOPTODEVICE 40G switch‑to‑server NIC high‑speed uplink module for server cluster connections

4. 40G to 4x10G Breakout Connectivity
hytoptodevice QSFP+ 40G CSR4 4x10G breakout connectivity for 10G/40G network upgrade

5.Leaf-Spine Architecture
400m long reach QSFP+ 40G CSR4 for data center leaf spine fabric



The Core Feature

1. 40G Connectivity for Data Center

High speed, low overhead. The QSFP+ 40G transceiver brings gigabit-class throughput to dense data center racks while drawing less power and taking up less space.


HYTOPTODEVICE 40G SR4 QSFP+ transceiver helps reduce CAPEX for data‑center upgrade projects


2.
100% Compatibility-Tested for Reliable Deployment

Deploy with confidence: every 40G QSFP+ module is rigorously tested for compatibility in the target switch environment — no surprises, no downtime. Not sure it fits? Get our Compatibility Video on request.

HYTOPTODEVICE Plug-and-play QSFP+ 40G CSR4 transceiver no unsupported error for switch

3. 100% Individually Tested for Peak Performance

Every unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE 40G SR4 QSFP+ module comprehensive factory testing stable performance for various platforms bulk wholesale orders


FAQ 

Q1: Can HYTOPTODEVICE’s QSFP+ 40G CSR4 optic run on my HPE Comware data center switch? A: This HYTOPTODEVICE compatible QSFP+ 40G CSR4 transceiver can run on HPE H3C switches with preloaded matching EEPROM data. We request your exact switch model and firmware version before purchase to validate full interoperability and avoid unexpected port recognition issues.

Q2: What troubleshooting steps can I take if my Comware switch shows unsupported transceiver alert after module installation? A: Vendor lock mismatch in module coding is the main trigger for this alert. HYTOPTODEVICE modules are pre-flashed with correct OEM coding; if the warning remains, check port settings, upgrade switch firmware or reach out to our team for EEPROM recoding service.

Q3: Can this JG709A replacement CSR4 transceiver integrate into my existing 10G SFP+ multimode fiber network? A: It can connect to your existing 10G SFP+ hardware via breakout cabling. This QSFP+ 40G CSR4 module splits one 40G port into 4 independent 10G links using MPO-to-4×LC breakout cable, supporting smooth staged network migration for your data center.

Q4: Is direct interconnection possible between this 40G CSR4 module and DAC or AOC cables on the opposite side? A: Direct connection with DAC or AOC is not supported. This optical CSR4 transceiver only pairs with another optical SR4/CSR4 transceiver or qualified media converter, since DAC/AOC use different electrical interfaces and cannot form valid optical links.

Q5: Can this HYTOPTODEVICE QSFP+ 40G CSR4 transceiver split one 40G port into four separate 10G data streams? A: Yes, breakout to four 10G links is fully supported. Using an MPO-to-4×LC fanout cable, a single 40G CSR4 port can feed four 10G SFP+ ports, which helps customers reuse existing 10G multimode infrastructure for network upgrade projects.

Q6: Am I allowed to hot swap this JG709A compatible transceiver without powering down the HPE Comware switch? A: This QSFP+ 40G CSR4 module supports hot swap. You can install or replace the transceiver without powering off your HPE H3C switch, just follow standard ESD protection practices to prevent static damage during handling.

Q7: Which fiber cable type should I pick to link 10G network hardware with this 40G CSR4 transceiver? A: Cable selection depends on your networking mode. Use MPO-to-4×LC duplex fanout cable for 4×10G breakout deployment, while MPO-to-MPO trunk cable is required for direct 40G-to-40G optical interconnection with HYTOPTODEVICE CSR4 transceivers.

Q8: How will unclean MPO connector end faces affect the link stability of this CSR4 optical transceiver? A: MPO connector cleanliness is extremely critical for reliable CSR4 links. Dust and dirt on MPO ferrule is the top cause of link dropouts and may permanently damage VCSEL laser; inspect and clean the connector before every insertion of HYTOPTODEVICE modules.

Q9: How can buyers verify that these QSFP+ 40G CSR4 transceivers are brand-new instead of refurbished products? A: You can verify authenticity by requesting full batch documentation. HYTOPTODEVICE provides serial number traceability, factory test reports, batch records and original packaging photos, with DOA replacement and formal warranty to guarantee non-refurbished brand-new modules.

Q10: What warranty coverage and RMA workflow do you offer for bulk procurement of QSFP+ 40G CSR4 optical transceivers? A: HYTOPTODEVICE provides 5-year warranty and streamlined RMA service for this QSFP+ 40G CSR4 transceiver. Simply report the fault, return the defective module, and we arrange replacement, you can get all policy terms confirmed in written contract before bulk purchase.

Q11: Will continuous long-hour operation degrade the optical transmission performance of this QSFP+ 40G CSR4 module? A: Slow laser aging is normal and can be monitored via built-in DDM function. HYTOPTODEVICE high-quality CSR4 modules sustain stable links for multiple years; sudden link failures are mostly caused by fiber contamination, overheating or ESD instead of natural laser aging.

Q12: Why is your QSFP+ 40G CSR4 transceiver priced lower than the original HPE JG709A optical module? A: Our lower price comes from direct factory supply without OEM brand premium and multi-level channel markup. HYTOPTODEVICE QSFP+ 40G CSR4 transceivers match OEM functionality for standard data center applications; cost reduction does not mean compromised product quality.

Q13: What support options are available if this QSFP+ 40G CSR4 transceiver arrives dead on arrival after shipment? A: HYTOPTODEVICE offers free replacement for DOA modules within 30 days after receiving goods. Keep the original package and test logs ready, so we can speed up the RMA replacement process for your QSFP+ 40G CSR4 bulk order.

Q14: Are sample QSFP+ 40G CSR4 units available for pre-deployment compatibility validation on HPE Comware networks? A: HYTOPTODEVICE provides sample options for qualified buyers. You can order paid samples, and the sample cost can be credited back when you place your first bulk order, allowing you to test compatibility on HPE hardware before large-scale deployment.

Q15: What is the proper installation procedure for this HPE H3C compatible QSFP+ 40G CSR4 optical transceiver? A: Gentle alignment and insertion is the correct installation method. Align the module with the port keyway, push softly until fully seated and lock the latch; never force insertion, as misalignment may bend internal pins and damage your HPE H3C switch port and HYTOPTODEVICE transceiver.

Packaging & Custom OEM Solutions

Every 40G QSFP+ SR4 module ships in sealed ESD-safe packaging, ready for same-day dispatch. Bulk orders offer OEM customization—logo printing and private labeling—tailored for network distributors, integrators, and enterprise deployments.

hytoptodevice cost‑effective 40G SR4 TRANSCEIVER module with custom package


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
  • ISO 9001:2015 certified manufacturing facility in Shenzhen
  • Average lead time of 3–5 business days with DHL/FedEx express options
  • Dedicated pre-sales engineering support for custom configurations
  • Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy. 
  • We can provide inspection and shipping videos to make you feel as if you are right here with the product.

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia

Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   

100% 3rd Party Compatible

Partial Test Demonstration

  • HYTOPTODEVICE compatible QSFP+ 40G CSR4 400m OM4 4x10G breakout transceiver
  • 40GBASE-CSR4 850nm QSFP+ 40G CSR4 module fix  unsupported transceiver error
  • HYTOPTODEVICE zero‑alarm plug‑and‑play  qsfp+ sr4  replacement 40G SR4 optical transceiver module 400m
  • HYTOPTODEVICE Long range 400m QSFP+ 40G CSR4 MPO-12 transceiver  drop-in replacement

Download