| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-40G-CSR4 | QSFP-40G-SR4(Cisco) |
| 2 | Alcatel-Lucent | QSFP-4X10G-SR | QSFP-40G-SR4(Huawei) |
| 3 | Arista | QSFP-40G-XSR4 | QSFP-40G-SR4(Dell) |
| 4 | Dell | 0MV31 | QSFP-40G-IR4 |
| 5 | H3C | QSFP-40G-CSR4-MM850 | QSFP-40G-LG4 |
| 6 | HPE Aruba | JH233A | QSFP-40G-ER4 |
| 7 | HPE H3C | JG709A | QSFP-40G-ZR4 |
| 8 | Huawei | QSFP-40G-eSR4 | |
| 9 | Juniper | QFX-QSFP-40G-ESR4 | |
| 10 | NVIDIA(Mellanox) | MC2210411-SR4E |
| H3C Compatible | QSFP-40G-CSR4-MM850 | Vendor Name | HYTOPTODEVICE |
| Form Factor | QSFP+ | Max Data Rate | 42Gbps (4x 10.5Gbps) |
| Wavelength | 850nm | Max Distance | 300m@OM4/400m@OM3 |
| Connector | MTP/MPO | Transmitter Type | VCSEL 850nm |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -8.0~2.0dBm | Receiver Sensitivity | < -13dBm |
| Power Consumption | ≤1.5W | Modulation | NRZ |
| Protocols | 40G Ethernet, SATA/SAS3, IEEE 802.3ba, MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Choice: Only compatible with OM3 / OM4 multi‑mode MPO‑12 trunk cabling; single‑mode fiber cannot facilitate 850 nm SR4 operation and will produce link failure.
Distance Limit: Max 300m (OM3) / 400m (OM4). Dirty end faces, excessive splicing and sharp bending will reduce actual transmission distance.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Installation Specification: Hot‑plug supported; keep MPO connector end‑faces clean, observe minimum fiber‑bend radius requirements.
Operating Environment: Designed for commercial‑grade 0°C‑70°C ambient conditions; maintain adequate cabinet‑level airflow to prevent excessive module temperature build‑up.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Primary Application Scenarios





1. 40G Connectivity for Data Center
High speed, low overhead. The QSFP+ 40G transceiver brings gigabit-class throughput to dense data center racks while drawing less power and taking up less space.



FAQ
Q1: Can this HYTOPTODEVICE QSFP+ 40G CSR4 optic work with my H3C data center switch hardware? A: This HYTOPTODEVICE compatible QSFP+ 40G CSR4 transceiver can run on H3C switches with preloaded matching EEPROM data. We request your exact switch model and firmware version before purchase to validate full interoperability and avoid unexpected port recognition issues.
Q2: How do I resolve unsupported transceiver alerts popping up on my H3C switch after module installation? A: Vendor lock mismatch in module coding is the main trigger for this alert. HYTOPTODEVICE modules are pre-flashed with correct OEM coding; if the warning remains, check port settings, upgrade switch firmware or reach out to our team for EEPROM recoding service.
Q3: Can this H3C compatible 40G CSR4 transceiver integrate into my existing 10G SFP+ network infrastructure? A: It can connect to your existing 10G SFP+ hardware via breakout cabling. This QSFP+ 40G CSR4 module splits one 40G port into 4 independent 10G links using MPO-to-4×LC breakout cable, supporting smooth staged network migration for your data center.
Q4: Is direct interconnection achievable between this QSFP+ 40G CSR4 transceiver and DAC or AOC cables on the opposite end? A: Direct connection with DAC or AOC is not supported. This optical CSR4 transceiver only pairs with another optical SR4/CSR4 transceiver or qualified media converter, since DAC/AOC use different electrical interfaces and cannot form valid optical links.
Q5: Can this HYTOPTODEVICE QSFP+ 40G CSR4 transceiver split a single 40G port into four independent 10G data channels? A: Yes, breakout to four 10G links is fully supported. Using an MPO-to-4×LC fanout cable, a single 40G CSR4 port can feed four 10G SFP+ ports, which helps customers reuse existing 10G multimode infrastructure for network upgrade projects.
Q6: Is hot swapping available for this H3C QSFP+ 40G CSR4 replacement transceiver while the switch stays powered on? A: This QSFP+ 40G CSR4 module supports hot swap. You can install or replace the transceiver without powering off your H3C switch, just follow standard ESD protection practices to prevent static damage during handling.
Q7: What fiber cable variant should I purchase to link 10G network hardware with this 40G CSR4 transceiver? A: Cable selection depends on your networking mode. Use MPO-to-4×LC duplex fanout cable for 4×10G breakout deployment, while MPO-to-MPO trunk cable is required for direct 40G-to-40G optical interconnection with HYTOPTODEVICE CSR4 transceivers.
Q8: What impact does MPO connector cleanliness have on the stability of 40G CSR4 fiber links? A: MPO connector cleanliness is extremely critical for reliable CSR4 links. Dust and dirt on MPO ferrule is the top cause of link dropouts and may permanently damage VCSEL laser; inspect and clean the connector before every insertion of HYTOPTODEVICE modules.
Q9: What steps can I take to verify these QSFP+ 40G CSR4 transceivers are brand-new instead of refurbished units? A: You can verify authenticity by requesting full batch documentation. HYTOPTODEVICE provides serial number traceability, factory test reports, batch records and original packaging photos, with DOA replacement and formal warranty to guarantee non-refurbished brand-new modules.
Q10: What warranty coverage and RMA workflow do you provide for bulk orders of QSFP+ 40G CSR4 optical modules? A: HYTOPTODEVICE provides 5-year warranty and streamlined RMA service for this QSFP+ 40G CSR4 transceiver. Simply report the fault, return the defective module, and we arrange replacement, you can get all policy terms confirmed in written contract before bulk purchase.
Q11: Will the optical transmission performance of this QSFP+ 40G CSR4 module degrade after long continuous running hours? A: Slow laser aging is normal and can be monitored via built-in DDM function. HYTOPTODEVICE high-quality CSR4 modules sustain stable links for multiple years; sudden link failures are mostly caused by fiber contamination, overheating or ESD instead of natural laser aging.
Q12: Why is the pricing of your QSFP+ 40G CSR4 transceiver lower than the original OEM optical transceiver? A: Our lower price comes from direct factory supply without OEM brand premium and multi-level channel markup. HYTOPTODEVICE QSFP+ 40G CSR4 transceivers match OEM functionality for standard data center applications; cost reduction does not mean compromised product quality.
Q13: What support options are available if my QSFP+ 40G CSR4 transceiver arrives dead on arrival upon receipt? A: HYTOPTODEVICE offers free replacement for DOA modules within 30 days after receiving goods. Keep the original package and test logs ready, so we can speed up the RMA replacement process for your QSFP+ 40G CSR4 bulk order.
Q14: Can I get sample QSFP+ 40G CSR4 units for pre-deployment compatibility testing on my H3C network? A: HYTOPTODEVICE provides sample options for qualified buyers. You can order paid samples, and the sample cost can be credited back when you place your first bulk order, allowing you to test compatibility on H3C hardware before large-scale deployment.
Q15: What is the proper installation procedure for the H3C compatible QSFP+ 40G CSR4 optical transceiver? A: Gentle alignment and insertion is the correct installation method. Align the module with the port keyway, push softly until fully seated and lock the latch; never force insertion, as misalignment may bend internal pins and damage your H3C switch port and HYTOPTODEVICE transceiver.
Packaging & Custom OEM Solutions
Every 40G QSFP+ SR4 module ships in sealed ESD-safe packaging, ready for same-day dispatch. Bulk orders offer OEM customization—logo printing and private labeling—tailored for network distributors, integrators, and enterprise deployments.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.



