Dell 430-4586  Compatible 1000BASE-ZX SFP 1550nm 80km DDM Duplex LC/UPC SMF Optical Transceiver Module

The HYTOPTODEVICE Dell 430-4586 compatible SFP is rigorously tested for compatibility with:

• Dell Networking N-Series: N1100, N1500, N2000, N3000, and N4000 series.

• Dell Networking S-Series: S3048-ON, S3100, S4048-ON, and S4100 series.

• Dell PowerConnect Series: 2800, 3500, 5500, 6200, 7000, and 8100 series.

• Dell PowerEdge Servers: Compatible with Dell-branded Broadcom or Intel SFP-based Network Interface Cards (NICs).

• Dell SonicWall: Select TZ and NSa series firewalls with SFP ports.

• Campus Core Interconnect: Linking remote campus buildings or research facilities across city-wide fiber spans up to 80km.

• Metro Ethernet Backhaul: Providing reliable 1.25G fiber uplinks for municipal offices or regional service providers.

• Disaster Recovery Links: Establishing long-distance fiber interconnects between a primary data center and a remote backup site.

FAQ for  Dell 430-4586  Compatible SFP Transceiver

Q1: Will this module work in my Dell switch without "certified" errors? A: Yes. Our modules are programmed with authentic Dell vendor signatures. Your Dell switch will identify it as the official 430-4586 SKU, ensuring it initializes immediately without warning messages or port-locks.

Q2: Does this 80km module support DOM/DDM on Dell switches? A: Absolutely. You can monitor real-time diagnostics using the Dell CLI command: show interfaces transceiver properties. This is essential for verifying signal integrity over 80km.

Q3: Can I use this 1G SFP in a 10G SFP+ slot on an N4032 switch? A: Yes. Most Dell SFP+ slots are backward compatible with 1G SFP modules. The port will typically auto-negotiate to 1Gbps, though you can manually set the speed if required.

Q4: Do I need an optical attenuator for short-distance links? A: YES. This is a high-power ZX laser. If your fiber link is shorter than 20km, you MUST use a 10dB-15dB LC optical attenuator to protect the sensitive optical receiver from permanent damage caused by excessive light.

Q5: Is 430-4586 compatible with older PowerConnect switches? A: Yes. This module is backward compatible with legacy Dell PowerConnect hardware that supports 1000BASE-ZX (1550nm 80km) standards.

Quality Assurance：Your Trusted Optical Transceiver Source

HYTOPTODEVICE is a vertically integrated manufacturer of high-performance optical transceivers. By controlling core materials at the source, we ensure every SFP module meets the highest standards of reliability and customization.

• Vertical Integration: In-house core material production ensures a stable, self-sufficient supply chain for all optical modules.

• Total Traceability: End-to-end oversight from raw components to final transceiver assembly guarantees 100% controllability.

• Bespoke Solutions: Expert-led R&D provides customized SFP transceiver designs tailored to your specific technical needs.

• 24-Hour Response: Our technical team guarantees a primary response to any inquiry or quality concern within 24 hours.

Carrier-Grade Quality. Factory-Direct Control. Rapid Response.

Quality Certification & Compliance：

At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

• ISO 9001: Certified quality management and production consistency.

• CE,UL & FCC: Fully compliant for seamless Global Market Access.

• RoHS: Committed to environmental responsibility and hazardous material control.

• Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing：

   

100% 3rd Party Compatible：

Partial Test Demonstration: