Brocade QSFP-40G-ZR4 Compatible QSFP+ 40G ZR4 Transceiver | 40GBASE-ZR4 LWDM4 80km Duplex LC SMF Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE is a professional optical transceiver manufacturer serving global resellers, system integrators and cross-border network purchasers. Our Brocade QSFP-40G-ZR4 compatible QSFP+ 40G ZR4 transceiver follows MSA SFF-8636 and IEEE specifications, adopting LWDM4 LAN wavelength division multiplexing in the 1310nm band. This duplex LC hot-pluggable optic delivers stable 40Gbps transmission up to 80km over OS2 single-mode fiber, built for long-haul metro backbone and cross-site DCI links for Brocade Fabric OS switches. Preloaded with Brocade-specific EEPROM profiles, it bypasses transceiver lock warnings under Fabric OS firmware. We offer bulk wholesale orders, small sample testing batches, private label OEM and custom EEPROM coding to meet international procurement and branded resale demands. Built-in DDM monitoring and hot-swap design simplify on-site deployment and sustain steady link performance for enterprise and carrier networking projects.
Key Technical Specifications
| Brocade Compatible |
QSFP-40G-ZR4 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
QSFP+ |
Max Data Rate |
41.25Gbps (4x 10.3125Gbps) |
| Wavelength |
1295.56nm, 1300.05nm,1304.58nm, 1309.14nm |
Max Distance |
80km |
| Connector |
Duplex LC |
Transmitter Type |
EML |
| Cable Type |
SMF |
Receiver Type |
APD |
| TX Power |
3~7dBm |
Receiver Sensitivity |
< -25dBm |
| Power Consumption |
≤4.5W |
Receiver Overload |
-8dBm |
| Protocols |
40G Ethernet IEEE802.3ba and 40GBASE-ZR4, MSA, QDR/DDR Infiniband |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the
Datasheet
Usage Guidelines & Best Practices
-
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this LAN CWDM module.
-
Optical Attenuator Required for Short Links: For testing or short-distance connections (<15km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.(15KM
-
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
- Mode Setting: Configure 40G port speed via switch CLI. This ZR4 module does not support breakout to 4×10G.
For detailed operation instructions, please refer to the
User Guide.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
HYTOPTODEVICE QSFP+ 40G ZR4 LWDM4 modules are pre-programmed with dedicated EEPROM profiles for Brocade Fabric OS firmware, delivering seamless plug-and-play recognition without transceiver warning alerts. Each transceiver undergoes real-machine validation, thermal cycling and 72-hour burn-in screening to guarantee reliable 80km long-haul fiber link performance. Custom EEPROM flashing and OEM branding are available for wholesale distributors and system integrators.
Validated Brocade Platforms:
- Brocade G610/G620/G630 fixed fabric switches
- Brocade X6-4/X6-8 / X7-4/X7-8 director chassis series
- Brocade 7810 extension switches
- All Brocade hardware fitted with standard 40G QSFP+ ports supporting 40GBASE-ZR4 LWDM4
2. Multi-Brand Cross Compatibility
Built on MSA open industry standards, this QSFP+ 40G ZR4 LWDM4 transceiver works with H3C, Arista, Brocade, Huawei, Juniper, Dell and other mainstream network hardware. It suits mixed-brand long-distance metro network and DCI expansion projects. Low MOQ bulk orders and OEM customization are available for global buyers.
3. Free Value-Added Services
- Custom EEPROM programming for multi-platform compatibility
- Sample testing available before bulk orders for project validation
- Private label customization and professional deployment guides
- Rigorous batch quality consistency control
- Custom EEPROM configuration for special and legacy network setups
- Free EEPROM recoding with 24/7 technical support
Primary Application Scenarios
- Long-Haul Data Center Interconnect (DCI): 80km long-distance fiber links connecting geographically separated data center sites via Brocade leaf-spine fabric
- Metro Core Backbone Network: Cross-city 40G fiber transmission for carrier infrastructure and large campus wide-area networks
- Multi-site Enterprise Long-Range Networking: Stable long-range fiber links for multi-branch enterprise cross-location interconnection
- Cost-Effective Brocade Fabric OS Switch Interface Upgrade: Direct drop-in replacement for original Brocade QSFP-40G-ZR4 optics to cut long-distance network procurement costs
- OEM Private Label Resale: Bulk optical module supply for global transceiver distributors and network equipment vendors
Connectivity Solutions(Applications)
1.40GbE Switch-to-Switch Connectivity

2.40GbE Structured Cabling Interconnect

The Core Feature
1. 40G QSFP+ Connectivity for Low-Power Data Centers
Combining low power consumption, high port density, and high-speed performance, the QSFP+ transceiver gives you a fast, cost-effective route to 40G transmission — no big footprint required.
2.No Guesswork. No Downtime. Pre-Tested for Your Switch.
A mismatched module doesn't just slow you down — it kills your link and burns your deployment hours. That's why every 40G QSFP+ ZR4 module is compatibility-tested in the target switch environment before it ships. What arrives at your rack is a module already proven to work: clean link-up on the first plug-in, zero surprises, zero downtime. See the verification for yourself:
Compatibility Video.
3.Every Unit Passes Before It Ships. Not Just a Sample.
A sample is a guess about the batch. An individual test is proof about the unit. Each QSFP+ ZR4 transceiver is individually verified for optical compliance and continuous operational stability before shipping — zero reliance on sampling, zero shortcuts. What you install is what we proved. Performance: guaranteed, not gambled. Curious how? Tour the
Test Center.

FAQ
Q1: How can I confirm if this QSFP+ 40G ZR4 works on my Brocade switch before placing bulk orders?
A: Yes, HYTOPTODEVICE can pre-run compatibility validation for your Brocade hardware prior to purchase. We require your exact switch model plus Fabric OS firmware version to verify EEPROM matching; this pre-check helps you avoid costly compatibility failures for your QSFP+ 40G ZR4 bulk project.
Q2: What should I do if my Brocade switch pops up an unsupported transceiver alert after installation?
A: This transceiver warning can be resolved, and you are not stuck with non-functional hardware. The error mainly comes from EEPROM coding mismatch or vendor lock on Fabric OS; HYTOPTODEVICE can re-code our QSFP+ 40G ZR4 units to remove this alert for your Brocade platform.
Q3: Is interoperability possible when pairing our HYTOPTODEVICE ZR4 with an original OEM ZR4 transceiver on the opposite fiber end?
A: Cross-brand interoperability is fully supported for standards-compliant 40GBASE-ZR4 links. Both optics follow identical LWDM4 specifications, so HYTOPTODEVICE QSFP+ 40G ZR4 can link reliably with OEM ZR4 transceivers over OS2 single-mode fiber.
Q4: What is the real-world transmission distance of this module, and which factors degrade optical reach?
A: Our QSFP+ 40G ZR4 has a rated 80km span over OS2 SMF, yet multiple field factors reduce usable transmission length. Excessive splice loss, contaminated LC connectors and high fiber attenuation will shorten the link; HYTOPTODEVICE’s engineers can calculate your optical power budget for your site fiber plant.
Q5: Can I deploy this long-range ZR4 optic on short fiber runs, or should I select ER4/LR4 instead to save budget?
A: Physically you can use QSFP+ 40G ZR4 for short-distance connections, but ER4 or LR4 is more economical for shorter spans. ZR4 carries higher component cost and targets 40–80km long-haul links; HYTOPTODEVICE sales team can recommend the most cost-effective optic based on your actual fiber length.
Q6: What quality inspections does HYTOPTODEVICE perform on every QSFP+ 40G ZR4 before shipment?
A: Every HYTOPTODEVICE QSFP+ 40G ZR4 transceiver undergoes comprehensive optical performance testing before delivery. Each unit gets checked for wavelength, transmit/receive power, DDM functionality and burn-in; this 100% individual test prevents defective units from shipping out for your wholesale purchase.
Q7: How does HYTOPTODEVICE maintain consistent quality between separate production batches for repeat bulk purchases?
A: We lock fixed BOM components and standardized test workflows to preserve batch consistency for QSFP+ 40G ZR4. HYTOPTODEVICE archives full test records for each production batch; repeat wholesale orders maintain identical optical performance for your long-term Brocade network rollout.
Q8: What risks exist for early module failure, and what warranty protections cover these defects?
A: The risk of premature failure is low for our commercial-grade QSFP+ 40G ZR4, and our standard warranty covers manufacturing defects. Factory burn-in screening eliminates early-life failures; HYTOPTODEVICE warranty excludes damage caused by improper field handling or fiber contamination.
Q9: Which international trade terms are available for bulk shipments of these QSFP+ 40G ZR4 transceivers?
A: HYTOPTODEVICE supports FOB, CIF and DDP Incoterms for bulk QSFP+ 40G ZR4 shipments. We can adjust trade terms according to your destination country and logistics requirements; your account manager will clarify duty allocation and delivery risks for your wholesale procurement.
Q10: What buyer safeguards apply if my QSFP+ 40G ZR4 shipment is delayed or fails to meet specifications?
A: Our formal sales contract includes protections for buyers facing delayed or non-conforming QSFP+ 40G ZR4 orders. For confirmed factory delays or non-compliant products, HYTOPTODEVICE can offer adjusted delivery schedules, product replacements or refunds following signed agreement terms.
Q11: Can you keep identical EEPROM coding and custom marking for multiple reorders of QSFP+ 40G ZR4?
A: HYTOPTODEVICE can preserve the same EEPROM configuration and custom branding across all repeat QSFP+ 40G ZR4 orders. We save your custom EEPROM profile and label artwork permanently; subsequent bulk shipments retain unchanged coding and marking for your OEM project.
Q12: How long is the lead time for custom labeling and OEM branding on QSFP+ 40G ZR4 transceivers?
A: Custom OEM labeling for QSFP+ 40G ZR4 normally requires 5–8 working days after artwork approval. This timeline starts once you confirm label design; HYTOPTODEVICE can expedite production for urgent wholesale buyers upon request.
Q13: Do you have client references from completed 80km long-haul deployments using this 40G ZR4 optic?
A: HYTOPTODEVICE holds anonymized case references from multiple 80km long-haul projects using QSFP+ 40G ZR4. We can share relevant metro backbone and DCI deployment references for Brocade fabric upon request during your procurement evaluation.
Q14: Can your engineering team evaluate my planned fiber link before I place the order for these QSFP+ 40G ZR4 modules?
A: Our engineering team provides pre-sales link validation support for your QSFP+ 40G ZR4 Brocade deployment. Share your fiber span length, loss budget and Brocade switch model; HYTOPTODEVICE engineers will assess whether our 80km LWDM4 transceiver fits your planned network connection.
Q15: What import and export compliance rules should I review before importing these QSFP+ 40G ZR4 transceivers?
A: QSFP+ 40G ZR4 optical modules generally have no strict global export license requirements, yet local import regulations vary widely. HYTOPTODEVICE recommends buyers check destination country import duties, RoHS and telecom certification before importing our transceivers for bulk orders.
Packaging & Custom OEM Solutions
Every 40G QSFP+ ZR4 module leaves our warehouse in sealed ESD-safe packaging, dispatched the same day your order is confirmed. For bulk orders, we tailor the full OEM package — logo printing and private labeling — built for network wholesaler,distributors, integrators, and enterprise deployments.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
- ISO 9001:2015 certified manufacturing facility in Shenzhen
- Average lead time of 3–5 business days with DHL/FedEx express options
- Dedicated pre-sales engineering support for custom configurations
- Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy.
- We can provide inspection and shipping videos to make you feel as if you are right here with the product.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP+ modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration
