| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Fortinet | FG-TRAN-SX | SFP-G31-10LD |
| 2 | D-Link | DEM-311GT | SFP-G31-40LD |
| 3 | F5 Networks | F5-UPG--R | SFP-G55-80LD |
| 4 | Alcatel-Lucent | SFP-GIG-SX | SFP-G55-100LD |
| 5 | Palo Alto Networks | PAN-SFP-SX | SFP-G55-120LD |
| 6 | MikroTik | S-85DLC05D | SFP-G55-160LD |
| 7 | Ruijie | MINI-GBIC-SX-MM850 | |
| 8 | ZTE | SFP-GE-M500 |
| Palo Alto Networks Compatible | PAN-SFP-SX | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP | Max Data Rate | 1.25Gbps |
| Wavelength | 850nm | Max Distance | 550m over OM2 MMF |
| Connector | Duplex LC | Transmitter Type | 850nm VCSEL |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -9.0~-3dBm | Receiver Sensitivity | < -18.0dBm |
| Typical Power Consumption | ≤0.8W | Receiver Overload | -3dBm |
| Bit Error Ratio (BER) | 1E-12 | DDM/DOM | Supported |
| Protocols | SFF-8472 MSA Compliant, IEEE 802.3ah-2004 | Operation Temperature | 0°C to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Choice: Duplex LC OM1/OM2/OM3/OM4 MMF (50 or 62.5/125 µm). Do NOT use SMF (OS1/OS2).
Connector Match: UPC/PC polish only. Do NOT use APC.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Link Setup:Lock speed to 1.25Gbps (Full Duplex) manually if auto-negotiation fails.
Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.
Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.
Environment:Commercial grade (0°C to 70°C). Avoid extreme heat, moisture, and dust.
Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Main Application Scenarios








"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.



