| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25G-LR-I | SFP28-25G-SR |
| 2 | Arista Networks | SFP-25G-LR-I | SFP28-10/25G-ESR |
| 3 | Brocade | 25G-SFP28-LR-I | SFP28-25G-LR2-I |
| 4 | NVIDIA(Mellanox) | MMA2L20-AR-I | SFP28-25G-LR |
| 5 | Juniper | SFP-25G-LR-IT | SFP28-25G-ER30 |
| 6 | Dell | SFP-25G-LR-I | SFP28-25G-ER |
| NVIDIA(Mellanox) Compatible | MMA2L20-AR-I | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 10km |
| Connector | Duplex LC | Transmitter Type | DFB 1310nm |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -4.5~+2dBm | Receiver Sensitivity | < -12dBm |
| Max. Power Consumption | ≤1.2W | Receiver Overload | 2dBm |
| Protocols | SFF-8472, SFF-8402, SFF-8432, SFF-8431, CEI-28G-VSR | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-LR 10KM module performance.
Distance & Link Budget: Supports up to a 10 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Port Compatibility Check: This optic only works on native 25G SFP28 ports. It can physically insert into SFP+ slots but will not negotiate 25G speed. Confirm your hardware or multi-vendor switch supports 25GBASE-LR standard before plugging in
Industrial Temperature Handling: This industrial-grade module supports -40℃ ~ +85℃ wide-temperature operation. Ensure the cabinet ventilation and heat dissipation are maintained in field deployments; avoid direct exposure to sunlight, moisture, dust or corrosive gas to extend service life.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1.Validated NVIDIA(Mellanox) Hardware & Firmware
2.Multi‑Brand Cross Interoperability
Features pre-programmed multi-vendor EEPROM compatibility. Rigorously tested to ensure flawless signal transmission, stable link integrity, and full CLI recognition across diverse switch and router ecosystems.
3.Free Value-Added Services
Custom EEPROM programming for multi-platform compatibility
Pre-bulk sample testing for project validation
Private label customization and deployment guides
Strict batch quality control
EEPROM configuration for legacy network environments
Free EEPROM recoding plus 24/7 technical support
Primary Application Scenarios
Connectivity Solutions(Applications)

The Core Features
1. Low Power & High Port Density

2. Host Validated for Reliable Interoperability
Each SFP28 25G transceiver plugs into target host switches directly without unsupported transceiver alarms and reduces project debugging time. Specific Compatibility Video available upon request.


Q1: Is RS-FEC required on the host device to achieve the full 10km distance?
A: NO. RS-FEC is not mandatory to reach the full 10km transmission distance for this 25GBASE-LR module. The transceiver can establish stable 10km links over G.652 single-mode fiber without enabling RS-FEC on the host port. Enabling RS-FEC can add extra link margin for links with poor fiber quality or multiple splices.
Q2: What is the exact optical power budget margin for a full 10km link?
A: YES. This HYTOPTODEVICE 25G SFP28 LR module features transmit power ranging from -4.5 ~ +2 dBm and receiver sensitivity of -12 dBm. The optical power budget reserves sufficient margin to cover fiber attenuation, splice loss and connector insertion loss for a complete 10km G.652 SMF link.
Q3: What is the maximum power consumption under full thermal stress?
A: YES. Under full thermal stress at +85℃, the maximum power consumption of this industrial SFP28 transceiver stays within the SFP28 MSA specified power limit, avoiding overheating issues even in high-temperature cabinet environments.
Q4: How well does the optical engine handle dispersion over standard G.652 single-mode fiber?
A: YES. The 1310nm DFB optical engine has excellent tolerance for chromatic dispersion on G.652 single-mode fiber. At 10km distance, dispersion impact is minimal and will not degrade the 25G signal integrity.
Q5: Does the transceiver introduce excessive transmitter deterministic jitter (DDJ)?
A: NO. This transceiver is factory calibrated to keep deterministic jitter (DDJ) within IEEE 802.3cc specification limits. Excessive DDJ is eliminated during production testing to guarantee clean eye diagram and reliable signal transmission.
Q6: Can the transceiver power on and establish a link immediately at −40∘C?
A: YES. This industrial grade module supports cold start at -40℃. It can power up and bring up the fiber link normally at the minimum rated operating temperature after completing internal initialization.
Q7: How does the module handle rapid ambient temperature swings?
A: YES. The module uses temperature compensation circuits for the DFB laser. It can tolerate fast ambient temperature fluctuations and maintains stable optical power and signal performance without link drop or BER spike.
Q8: Are protective optical dust caps supplied, and do they meet industrial handling standards?
A: YES. Industrial-grade optical dust caps are included with each module. The dust caps comply with standard industrial handling requirements to shield the LC optical port from dust and contamination during storage and installation.
Q9: What level of ESD protection is built into the electrical edge connector?
A: YES. The electrical edge connector integrates built-in ESD protection circuitry meeting industry requirements, defending the internal chipset against electrostatic discharge damage during module plug-and-play operations.
Q10: Has each batch undergone 100% full-temperature cycle burn-in testing prior to shipping?
A: YES. HYTOPTODEVICE runs 100% full temperature cycle burn-in testing for every batch before shipment. Our 3-temperature aging screening filters out marginal units to reduce field failure risk for bulk buyers. Real test reports and lab test videos are available upon request.
Q11: How does the module interact with host auto-negotiation protocols?
A: NO. This is a fixed-rate 25GBASE-LR transceiver. It does not support auto-negotiation; the host port must be manually configured to 25G fixed speed to bring up the optical link.
Q12: Does live insertion cause high electrical inrush current that triggers host power supply resets?
A: NO. The module has inrush current limiting circuitry. Hot plug / live insertion will not generate excessive surge current to trigger host power supply reset or port shutdown.
Q13: Is the internal microcontroller firmware immune to state lockups during host power cycles?
A: YES. The on-board microcontroller firmware has watchdog and power cycle reset logic. It avoids state lockup when the host undergoes repeated power on/off cycles in data center or industrial sites.
Q14: How can buyers verify that optics are genuine industrial-grade rather than relabeled commercial stock?
A: Buyers can verify via our 3-temperature cycling test reports and DDM log data. HYTOPTODEVICE can provide real lab test videos and full test documentation to prove these are true industrial grade modules, not relabeled commercial versions.
Q15: Is the transceiver certified as Class 1 Laser Safe under IEC 60825-1?
A: YES. This 25G SFP28 LR transceiver is Class 1 laser certified under IEC 60825-1. Under normal operating conditions, there is no risk of hazardous laser radiation exposure to operators.
Packaging & Custom OEM Solutions
Every SFP28 25G module arrives in its own ESD-safe sealed bag, fully protected against static damage from the moment it leaves our line. Stock is on the shelf, so orders ship the same day. Distributors, wholesalers, and integrators can also scale under their own name — we handle custom logo printing, private labeling, and made-to-order packaging, so you can launch, grow, and defend your brand without investing in your own manufacturing line.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






