| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25G-LR-I | SFP28-25G-SR |
| 2 | Arista Networks | SFP-25G-LR-I | SFP28-10/25G-ESR |
| 3 | Brocade | 25G-SFP28-LR-I | SFP28-25G-LR2-I |
| 4 | NVIDIA(Mellanox) | MMA2L20-AR-I | SFP28-25G-LR |
| 5 | Juniper | SFP-25G-LR-IT | SFP28-25G-ER30 |
| 6 | Dell | SFP-25G-LR-I | SFP28-25G-ER |
| Juniper Compatible | SFP-25G-LR-IT | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 10km |
| Connector | Duplex LC | Transmitter Type | DFB 1310nm |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -4.5~+2dBm | Receiver Sensitivity | < -12dBm |
| Max. Power Consumption | ≤1.2W | Receiver Overload | 2dBm |
| Protocols | SFF-8472, SFF-8402, SFF-8432, SFF-8431, CEI-28G-VSR | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-LR 10KM module performance.
Distance & Link Budget: Supports up to a 10 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Port Compatibility Check: This optic only works on native 25G SFP28 ports. It can physically insert into SFP+ slots but will not negotiate 25G speed. Confirm your hardware or multi-vendor switch supports 25GBASE-LR standard before plugging in
Industrial Temperature Handling: This industrial-grade module supports -40℃ ~ +85℃ wide-temperature operation. Ensure the cabinet ventilation and heat dissipation are maintained in field deployments; avoid direct exposure to sunlight, moisture, dust or corrosive gas to extend service life.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1.Validated Juniper Networks Hardware & Firmware
2.Multi‑Brand Cross Interoperability
Features pre-programmed multi-vendor EEPROM compatibility. Rigorously tested to ensure flawless signal transmission, stable link integrity, and full CLI recognition across diverse switch and router ecosystems.
3.Free Value-Added Services
Custom EEPROM programming for multi-platform compatibility
Pre-bulk sample testing for project validation
Private label customization and deployment guides
Strict batch quality control
EEPROM configuration for legacy network environments
Free EEPROM recoding plus 24/7 technical support
Primary Application Scenarios
Connectivity Solutions(Applications)

The Core Features
1. Low Power & High Port Density

2. Host Validated for Reliable Interoperability
Each SFP28 25G transceiver plugs into target host switches directly without unsupported transceiver alarms and reduces project debugging time. Specific Compatibility Video available upon request.


Q1: Do I need to enable RS-FEC on Juniper switch ports to run 10km links with compatible industrial 25G SFP28 LR transceiver? A: NO. RS-FEC is not mandatory for this HYTOPTODEVICE Juniper SFP-25G-LR-IT compatible 25G SFP28 LR module to achieve full 10km reach. The transceiver supports stable 25G transmission over G.652 single-mode fiber without RS-FEC; enabling RS-FEC only adds extra link margin for poor fiber runs with multiple splices.
Q2: What optical power budget headroom does Juniper compatible 25G SFP28 LR industrial module offer for 10km single mode fiber links? A: YES. This HYTOPTODEVICE industrial 25G SFP28 LR module features transmit power of -4.5 ~ +2 dBm and receiver sensitivity of -12 dBm. The power budget reserves sufficient headroom to absorb fiber attenuation, splice loss and connector insertion loss for a complete 10km G.652 SMF deployment.
Q3: What is the maximum power draw of industrial 25G SFP28 LR transceiver under continuous high-temperature thermal stress at +85°C? A: YES. Under full thermal stress at +85℃, the maximum power consumption of this HYTOPTODEVICE Juniper compatible 25G SFP28 LR stays within SFP28 MSA power limits. This design prevents overheating even inside densely packed industrial cabinets and edge network enclosures.
Q4: How does Juniper compatible 25G SFP28 LR industrial optical transceiver handle chromatic dispersion across G.652 single-mode fiber at 10km? A: YES. The 1310nm DFB optical engine inside HYTOPTODEVICE’s SFP-25G-LR-IT compatible 25G SFP28 LR has strong tolerance for chromatic dispersion on G.652 fiber. At 10km distance, dispersion impact remains minimal and will not degrade 25G signal integrity.
Q5: Will factory calibrated industrial 25G SFP28 LR transceiver produce excessive transmitter deterministic jitter (DDJ) for Juniper network hardware? A: NO. This HYTOPTODEVICE Juniper compatible 25G SFP28 LR transceiver is factory calibrated to keep deterministic jitter (DDJ) under IEEE 802.3cc specification limits. High DDJ is filtered out during production testing to guarantee clean eye diagrams and reliable optical signal delivery.
Q6: Can industrial grade 25G SFP28 LR optic power up and bring up fiber links immediately at -40°C cold start for Juniper edge routers? A: YES. HYTOPTODEVICE’s Juniper SFP-25G-LR-IT compatible 25G SFP28 LR module supports reliable cold start at -40℃. It can power on and establish fiber links normally after internal initialization at the minimum rated industrial operating temperature.
Q7: How does Juniper compatible industrial 25G SFP28 LR transceiver perform when exposed to fast fluctuating ambient temperature in field sites? A: YES. This HYTOPTODEVICE 25G SFP28 LR module uses built-in DFB laser temperature compensation circuits. It withstands rapid ambient temperature swings and maintains stable optical power and signal performance without link drop or BER spikes for industrial and 5G edge networks.
Q8: Are industrial-grade LC dust caps included with wholesale 25G SFP28 LR transceivers compatible with Juniper SFP-25G-LR-IT? A: YES. Every HYTOPTODEVICE Juniper compatible 25G SFP28 LR module ships with industrial-grade optical dust caps. These caps meet industrial handling standards to protect LC ports from dust and contamination during storage, shipping and field installation.
Q9: What ESD protection rating is integrated on the electrical edge connector of Juniper compatible industrial 25G SFP28 LR transceiver? A: YES. This HYTOPTODEVICE 25G SFP28 LR transceiver has built-in ESD protection circuitry on the electrical edge connector meeting industry standards. It shields internal chips from electrostatic damage during hot plug operations on Juniper switches and routers.
Q10: Does HYTOPTODEVICE run full temperature cycling burn-in testing for every batch of Juniper compatible 25G SFP28 LR industrial transceivers before shipment? A: YES. HYTOPTODEVICE performs 100% full temperature cycle burn-in testing on each batch of this Juniper SFP-25G-LR-IT compatible 25G SFP28 LR module before delivery. Our 3-temperature aging screening removes marginal units, and real test reports plus lab test videos can be shared upon buyer request.
Q11: What link behavior will occur when pairing Juniper compatible 25G SFP28 LR industrial transceiver with host auto-negotiation features? A: NO. This HYTOPTODEVICE 25G SFP28 LR is a fixed-rate 25GBASE-LR transceiver and does not support auto-negotiation. The Juniper host port must be manually set to fixed 25G speed to successfully bring up the optical fiber link.
Q12: Does hot-swapping Juniper compatible industrial 25G SFP28 LR transceiver trigger large inrush current and reset host power supplies? A: NO. This HYTOPTODEVICE 25G SFP28 LR module integrates inrush current limiting circuitry. Hot live insertion will not generate excessive surge current to trigger Juniper host power supply resets or automatic port shutdown events.
Q13: Can the onboard microcontroller firmware avoid lockup states during repeated host power cycles for industrial 25G SFP28 LR transceiver? A: YES. The firmware inside HYTOPTODEVICE’s Juniper compatible 25G SFP28 LR module includes watchdog and power cycle reset logic. It prevents state lockup during repeated power on/off cycles in data center and industrial edge deployments.
Q14: What supporting documentation can bulk buyers use to verify HYTOPTODEVICE 25G SFP28 LR optics are genuine industrial grade instead of relabeled commercial stock? A: Buyers can validate product authenticity using our 3-temperature cycling test reports and DDM log data. HYTOPTODEVICE can provide real lab test videos and full test documentation to prove these Juniper compatible 25G SFP28 LR modules are true industrial grade, not relabeled commercial optics.
Q15: Is the Juniper compatible 25G SFP28 LR industrial optical transceiver classified as IEC 60825-1 Class 1 laser safe? A: YES. This HYTOPTODEVICE 25G SFP28 LR transceiver is certified Class 1 laser safe under IEC 60825-1. Under normal operating conditions, operators face zero risk of exposure to hazardous laser radiation.
Packaging & Custom OEM Solutions
Every SFP28 25G module arrives in its own ESD-safe sealed bag, fully protected against static damage from the moment it leaves our line. Stock is on the shelf, so orders ship the same day. Distributors, wholesalers, and integrators can also scale under their own name — we handle custom logo printing, private labeling, and made-to-order packaging, so you can launch, grow, and defend your brand without investing in your own manufacturing line.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






