| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25GLRL-31-I | SFP28-25G-SR |
| 2 | Arista Networks | SFP-25GLRL-31-I | SFP28-10/25G-ESR |
| 3 | Intel | SFP-25GLRL-31-I | SFP28-25G-LR2-I |
| 4 | NVIDIA(Mellanox) | SFP-25GLRL-31-I | SFP28-25G-LR |
| 5 | Juniper | SFP-25GLRL-31-I | SFP28-25G-LR-I |
| 6 | Dell | SFP-25GLRL-31-I | SFP28-25G-ER30 |
| 7 | Generic | SFP-25G-LR2-I | SFP28-25G-ER |
| Cisco Compatible | SFP-25GLRL-31-I | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 2km |
| Connector | Duplex LC | Transmitter Type | DFB 1310nm |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -7~+2dBm | Receiver Sensitivity | < -12dBm |
| Max. Power Consumption | ≤1.2W | DOM/DDM | Fully Supported |
| Protocols | SFF-8472, SFF-8024, SFF-8431, SFF-8432 | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-LR 2KM module performance.
Distance & Link Budget: Supports up to a 2 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Industrial Temperature Handling: This industrial-grade module supports -40℃ ~ +85℃ wide-temperature operation. Ensure the cabinet ventilation and heat dissipation are maintained in field deployments; avoid direct exposure to sunlight, moisture, dust or corrosive gas to extend service life.





Q2: Will this wide temperature 25G SFP28 module operate reliably in outdoor industrial cabinet environments from -40℃ to +85℃? A: YES. This HYTOPTODEVICE industrial grade 25G SFP28 LR transceiver is fully tested over -40℃ ~ +85℃ temperature range, maintaining stable 25G transmission for field industrial cabinet deployments.
Q3: Can I plug this 25G SFP28 LR optical module into a standard SFP+ port and run at reduced speed? A: NO. The HYTOPTODEVICE 25G SFP28 LR module fits physically into SFP+ slots but cannot negotiate 25G speed; it only functions properly inside native 25G SFP28 ports.
Q4: Does the industrial 25G SFP28 LR transceiver from HYTOPTODEVICE support DDM real-time optical monitoring? A: YES. This 25G SFP28 LR module supports DDM/DOM function, allowing real-time tracking of optical power, temperature and voltage for easier industrial network maintenance.
Q5: Is single-mode OS2 fiber required to reach the full 2km transmission distance for this 25GBASE-LR transceiver? A: YES. The HYTOPTODEVICE 25G SFP28 LR industrial module achieves its rated 2km reach only over OS2 single-mode fiber; multimode fiber will cause excessive signal loss and link failure.
Q6: Do I need to pay extra fees for EEPROM recoding when deploying this 25G SFP28 LR module on mixed-brand hardware? A: NO. HYTOPTODEVICE provides free EEPROM reconfiguration service for this industrial 25G SFP28 LR transceiver to support multi-vendor mixed network deployment.
Q7: Can buyers request sample testing of this industrial 25G SFP28 LR module before bulk wholesale orders? A: YES. HYTOPTODEVICE supports pre-project sample validation for distributors and system integrators to verify the performance of this 25G SFP28 LR industrial transceiver before mass purchase.
Q8: Will using this third-party industrial 25G SFP28 transceiver void the hardware warranty of my Cisco switch? A: NO. This MSA-compliant HYTOPTODEVICE 25G SFP28 LR industrial module does not void your Cisco hardware warranty, and millions of these transceivers are deployed by global system integrators.
Q9: Is FEC mandatory to enable for stable 25G transmission with this industrial SFP28 LR optical transceiver? A: NO. FEC is optional for the 2km short reach of this HYTOPTODEVICE 25G SFP28 LR module, but enabling FEC improves link margin for industrial links with minor fiber attenuation.
Q10: Can this industrial 25G SFP28 LR transceiver be used for 5G fronthaul optical interconnection projects? A: YES. HYTOPTODEVICE designs this wide-temperature 25G SFP28 LR module to meet 5G fronthaul requirements, supporting stable short-reach optical interconnection for carrier-grade industrial networks.
Q11: What MOQ applies if wholesalers want private label customization for this 25G SFP28 LR industrial transceiver? A: Flexible low MOQ. HYTOPTODEVICE accepts small batch private label orders for this 25G SFP28 LR module, supporting custom branding for global wholesalers and distributors.
Q12: Does this industrial 25G SFP28 LR module support hot swap during live industrial network operation? A: YES. This HYTOPTODEVICE 25G SFP28 LR transceiver supports hot-swap, allowing technicians to replace modules without fully powering down running industrial network equipment.
Q13: Can this 25G SFP28 LR industrial transceiver work over CWDM passive multiplexer networks? A: NO. This module uses fixed 1310nm wavelength, it is not optimized for CWDM passive mux systems and will suffer signal degradation if deployed in such architectures.
Q14: What quality tests are performed on each industrial 25G SFP28 LR transceiver before shipment from HYTOPTODEVICE? A: Every unit passes optical performance calibration, wide-temperature aging test and DDM inspection. HYTOPTODEVICE full QC workflow guarantees consistent quality for global buyers of this 25G SFP28 LR module.
Q15: Does HYTOPTODEVICE offer 24/7 technical support for troubleshooting industrial 25G SFP28 LR transceiver link issues? A: YES. HYTOPTODEVICE delivers round-the-clock technical consultation for customers deploying this 25G SFP28 LR industrial transceiver, solving compatibility and fiber link problems promptly.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






