| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25G-iER-S | SFP28-25G-SR |
| 2 | Cisco | SFP-25G-iER-S-I | SFP28-10/25G-ESR |
| 3 | Arista Networks | SFP-25G-ER-Lite | SFP28-25G-LR2-I |
| 4 | Arista Networks | SFP-25G-ER-Lite-I | SFP28-25G-LR |
| 5 | Brocade | 25G-SFP28-ER-Lite | SFP28-25G-LR-I |
| 6 | Brocade | 25G-SFP28-ER-Lite-I | SFP28-25G-ER |
| 7 | NVIDIA(Mellanox) | SFP28-25GER-31 |
| Cisco Compatible | SFP-25G-iER-S | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 30km |
| Connector | Duplex LC | Transmitter Type | DML 1310nm |
| Cable Type | SMF | Receiver Type | APD |
| TX Power | 0~+6dBm | Receiver Sensitivity | < -19dBm |
| Max. Power Consumption | ≤2.2W | Receiver Overload | -4dBm |
| Protocols | MSA Compliant, CPRI, eCPRI | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-ER 30KM module performance.
Distance & Link Budget: Supports up to a 30 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Port Compatibility Check: This optic only works on native 25G SFP28 ports. It can physically insert into SFP+ slots but will not negotiate 25G speed. Confirm your hardware or multi-vendor switch supports 25GBASE-LR standard before plugging in
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<20km), connect a 10dB–15dB optical attenuator to the RX port to prevent damaging the receiver.(20KM<Distance<30km,connect 5‑10dB optical attenuator)
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1.Validated Cisco Hardware & Firmware
This high-performance 25G SFP28 ER Lite 30km optical transceiver features exclusive Cisco-matched EEPROM coding, ensuring flawless plug-and-play recognition without unsupported transceiver warnings under Cisco IOS and NX-OS firmware systems. Every finished module undergoes strict burn-in aging and multi-temperature stability testing before factory delivery to guarantee 100% compatibility with Cisco devices:
2.Multi‑Brand Cross Interoperability
Features pre-programmed universal multi-vendor EEPROM compatibility based on MSA international standards. Rigorously tested and verified to deliver error-free signal transmission, stable long-distance link integrity and complete CLI identification across Arista, Juniper, Dell, Brocade and other mainstream brand network devices
3.Free Value-Added Services
Custom EEPROM programming for multi-platform compatibility
Pre-bulk sample testing for project validation
Private label customization and deployment guides
Strict batch quality control
EEPROM configuration for legacy network environments
Free EEPROM recoding plus 24/7 technical support
Primary Application Scenarios
• Metro & Long-Distance Backbone Transmission: Optimized for 30km long-span single-mode fiber links for cross-building, campus and metropolitan backbone networks.
• 5G Wireless Fronthaul & Backhaul: Delivers high-density, low-latency 25G optical links for 5G base station CPRI/eCPRI infrastructure.
• Data Center Interconnection: Suitable for long-distance rack uplinks, cross-building interconnection and leaf-spine network architecture.
• Enterprise & Smart City Infrastructure: Long-haul fiber trunk upgrades for smart grid, municipal surveillance and campus private networks.
• Wholesale & OEM Procurement: Reliable bulk supply for distributors, VARs and system integration projects.



The Core Features
1. Low Power & High Port Density

2. Host Validated for Reliable Interoperability
Pre-flashed EEPROM matching target SFP28 25G ER specs, plug and play without unsupported transceiver warnings and saves site debugging time.Specific Compatibility Video available upon request.


Q1: Is RS-FEC function mandatory on Cisco host ports to achieve the full 30km transmission range of 25G ER Lite transceiver? A: YES. RS-FEC is a necessary configuration for this HYTOPTODEVICE Cisco SFP-25G-iER-S compatible 25G ER Lite module to reach the full 30km transmission distance. Enabling RS-FEC effectively compensates for fiber attenuation, chromatic dispersion and connector loss in long-span links, ensuring error-free 25G signal transmission.
Q2: What optical power budget margin can this Cisco compatible 25GBASE-ER Lite module provide for 30km single-mode fiber links? A: YES. This HYTOPTODEVICE 25G SFP28 ER Lite module features transmit power of 0 ~ +6 dBm and receiver sensitivity of -19 dBm, receiver overload at -4 dBm. It reserves sufficient power margin to cover fiber attenuation, fusion splice loss and connector insertion loss for 30km G.652 SMF links.
Q3: What is the maximum power consumption of this 25G ER Lite transceiver under continuous high-temperature operating conditions? A: YES. Under full thermal stress at +70℃ maximum operating temperature, the maximum power draw of this HYTOPTODEVICE Cisco-compatible transceiver strictly complies with SFP28 MSA standard limits. It will not cause overheating or power overload in high-density switch cabinet deployments.
Q4: How does this 25G ER Lite optical module resist chromatic dispersion interference during 30km long-distance transmission? A: YES. The industry top-tier DML optical engine of HYTOPTODEVICE SFP28 ER Lite module is professionally calibrated for long-span transmission. It minimizes chromatic dispersion impact on G.652 single-mode fiber, ensuring complete signal integrity and ultra-low BER within the 30km transmission limit.
Q5: Will this Cisco compatible 25G long-reach transceiver produce excessive deterministic jitter (DDJ) to affect link stability? A: NO. This HYTOPTODEVICE 25G SFP28 ER Lite module is precisely factory calibrated. The transmitter deterministic jitter (DDJ) is strictly controlled within IEEE 802.3cc standard thresholds, avoiding signal distortion and intermittent link dropouts in long-distance transmission scenarios.
Q6: Can this 25G ER Lite transceiver complete initialization and establish stable links normally at low-temperature operating environments? A: YES. This HYTOPTODEVICE Cisco SFP-25G-iER-S compatible module supports reliable low-temperature cold start. It can complete internal initialization and successfully activate 25G fiber links stably even in long-term low-temperature network operation environments.
Q7: How does the 25G ER Lite module adapt to frequent ambient temperature changes in outdoor and metro network scenarios? A: YES. The module is built with intelligent DML laser temperature compensation circuits. It can automatically adjust optical power parameters to adapt to rapid ambient temperature fluctuations, maintaining consistent transmission performance without link flapping or bit error surges.
Q8: Are standard protective dust caps equipped with bulk-ordered Cisco compatible 25G ER Lite transceivers? A: YES. Every HYTOPTODEVICE 25G SFP28 ER Lite module is equipped with high-quality standard LC dust-proof caps. The accessories effectively protect the optical port from dust, moisture and scratch damage during transportation, storage and on-site installation, meeting professional network engineering standards.
Q9: What level of ESD protection is integrated on the electrical gold finger of this 25G ER Lite transceiver? A: YES. This HYTOPTODEVICE long-reach optical module integrates built-in ESD anti-static circuits on the electrical edge connector. It can effectively resist electrostatic damage during hot plugging and manual operation, protecting internal core chips and improving product service life.
Q10: Does HYTOPTODEVICE conduct full temperature cycle burn-in testing for every batch of Cisco compatible 25G ER Lite modules before delivery? A: YES. HYTOPTODEVICE implements full-batch temperature cycle burn-in aging tests for all SFP-25G-iER-S compatible modules. Defective and unstable units are fully screened out. Real test reports and laboratory test videos can be provided to buyers for quality verification.
Q11: What link matching state will occur when this 25G ER Lite transceiver is used with host device auto-negotiation function? A: NO. This HYTOPTODEVICE 25GBASE-ER Lite module is a fixed-rate 25G dedicated transceiver and does not support rate auto-negotiation and downward compatibility. Cisco host ports need to be manually fixed to 25G speed to normally establish optical links.
Q12: Will hot-swapping this Cisco compatible 25G ER Lite module generate excessive inrush current to trigger host power supply reset? A: NO. The module is designed with professional inrush current limiting circuitry compliant with MSA standards. Live hot insertion and removal will not generate instantaneous high surge current, nor will it trigger Cisco switch port shutdown or power supply reset failure.
Q13: Can the internal firmware of the 25G ER Lite module avoid deadlock failure during repeated host power cycles? A: YES. The internal microcontroller firmware of HYTOPTODEVICE 25G SFP28 ER Lite module is embedded with watchdog reset mechanism. It effectively avoids system state lockup and program crash during frequent host power on/off cycles, ensuring long-term stable operation.
Q14: What precaution should I take for short-distance bench testing using this 25G ER Lite transceiver? A: YES. Short direct fiber connection will cause optical overload because our receiver overload threshold is -4dBm. You must use a 10–15dB optical attenuator during short-distance bench testing to prevent receiver saturation and link instability.
Q15: Does this Cisco compatible 25G ER Lite transceiver meet IEC 60825-1 Class 1 laser safety certification standards? A: YES. This HYTOPTODEVICE 25G SFP28 ER Lite optical transceiver strictly complies with IEC 60825-1 international standards and has obtained Class 1 laser safety certification. No hazardous laser radiation risk exists during daily installation and operation.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






