NETGEAR AGM731F Compatible 1000BASE-SX Pluggable Transceiver Module | SFP 850nm 550m MMF Bulk & Wholesale | HYTOPTODEVICE
Product Overview
This 1000BASE-SX pluggable transceiver module is fully compatible with NETGEAR AGM731F. Complying with IEEE and MSA standards, it delivers stable 1.25Gbps gigabit transmission for indoor multimode fiber networks.
Preloaded with dedicated NETGEAR firmware, this pluggable transceiver module supports alarm-free plug-and-play and hot-swap operation. It serves as a cost-effective replacement for original AGM731F modules, ideal for bulk procurement and large-scale network deployment.
Featuring an 850nm VCSEL laser, this pluggable transceiver module reaches 550m transmission on OM2/OM3/OM4 fiber and 275m on OM1 legacy fiber. Built-in DDM monitoring and factory aging tests ensure stable 7×24 operation for NETGEAR business networks.
Key Technical Specifications
| NETGEAR Compatible |
AGM731F |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
SFP |
Max Data Rate |
1.25Gbps |
| Wavelength |
850nm |
Max Distance |
550m over OM2 MMF |
| Connector |
Duplex LC |
Transmitter Type |
850nm VCSEL |
| Cable Type |
MMF |
Receiver Type |
PIN |
| TX Power |
-9.0~-3dBm |
Receiver Sensitivity |
< -18.0dBm |
| Typical Power Consumption |
≤0.8W |
Receiver Overload |
-3dBm |
| Bit Error Ratio (BER) |
1E-12 |
DDM/DOM |
Supported |
| Protocols |
SFF-8472 MSA Compliant, IEEE 802.3ah-2004 |
Operation Temperature |
0°C to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
-
Fiber Choice: Duplex LC OM1/OM2/OM3/OM4 MMF (50 or 62.5/125 µm). Do NOT use SMF (OS1/OS2).
-
Connector Match: UPC/PC polish only. Do NOT use APC.
-
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Link Setup:Lock speed to 1.25Gbps (Full Duplex) manually if auto-negotiation fails.
-
Handling: Wear ESD protection. Keep fiber bend radius ≥ 30 mm.
-
Installation & Hot-Swap Rules:MSA hot-swappable. Insert/remove gently without powering down.
-
Environment:Commercial grade (0°C to 70°C). Avoid extreme heat, moisture, and dust.
Links to the Datasheet, User Guide and Compatibility Guides are available on the product page.
Full Compatibility List and Supported Devices
1. Supported Hardware & Firmware
Preconfigured NETGEAR firmware ensures flawless recognition of this pluggable transceiver module. Plug-and-play and hot-swap compatible with mainstream NETGEAR business switches:
-
NETGEAR JGS Series Switches: JGS524F and other gigabit SFP port managed switches
-
NETGEAR GS Series Smart Switches: Enterprise gigabit access and aggregation switch models
-
NETGEAR ProSAFE Business Switches: Full-featured managed switch series with SFP uplink ports
-
NETGEAR Legacy Gigabit Devices: All network hardware supporting AGM731F standard modules
2. Multi-Brand Cross Compatibility
This 1000BASE-SX pluggable transceiver module strictly follows MSA unified standards, enabling stable interoperability with Cisco, Juniper, Brocade, Ubiquiti and other third-party gigabit network devices. Custom EEPROM firmware coding is available to adapt to mixed-vendor network environments, meeting diverse enterprise networking construction needs.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Free sample testing before bulk orders
-
Complete test reports for project acceptance
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
Main Application Scenarios
-
Business LAN Uplinking: Gigabit fiber uplink for NETGEAR access switches
-
Data Center Short-Range Links: Intra-rack switch and server interconnection
-
Network Upgrade & Replacement: Cost-effective substitute for aging AGM731F modules
-
Batch Project Deployment: Ideal for large-scale office and campus network construction
Connectivity Solutions(Applications)
1.1GbE Switch-to-Switch Connectivity

2.1GbE Switch to Media Converter Connectivity
3.1GbE Structured Cabling Interconnect

4.1GbE Switch-to-NIC Interconnection

The Core Feature
1. High-Efficiency 1G Data Center Interconnect
Engineered for high-density network environments, our Netgear compatible gigabit pluggable transceiver deliver plug-and-play 1GbE performance with ultra-low power dissipation—offering a budget-friendly, eco-conscious solution for your daily networking needs.
2.Zero-Downtime Reliability & 100% Brand Compatibility
Rest assured with
optical pluggable transceiver module rigorously benchmarked on over 150+ major brand host switches in our testing lab. Verify your setup instantly via our compatibility sheet—or request a custom, switch-specific Compatibility Video before you buy.
3.Lab-Certified Quality, Built for Zero Failures
Every pluggable transceiver is stress-tested on advanced optoelectronic diagnostics to guarantee signal integrity and long-term stability. Experience full transparency—take a virtual tour of our
Test Center to see our Quality Assurance process in action.

FAQ
Q1: How to fix unrecognized third-party NETGEAR pluggable transceiver module?
A: Mismatched EEPROM data causes recognition failures. Our pre-flashed pluggable transceiver module matches AGM731F specs for plug-and-play use.
Q2: Does this 1000BASE-SX pluggable transceiver module support auto-negotiation?
A: Yes. Locking ports to 1000Mbps full-duplex delivers more stable business network performance.
Q3: What is the transmission distance of NETGEAR 850nm pluggable transceiver module?
A: Up to 550m on standard OM2/OM3/OM4 fiber and 275m on traditional OM1 multimode fiber.
Q4: Why is OM1 transmission shorter for gigabit pluggable transceiver module?
A: OM1 modal dispersion limits bandwidth stability, restricting error-free links within 275 meters.
Q5: Can different wavelength pluggable transceiver module interconnect?
A: No. Valid links require identical 850nm wavelength and multimode specifications on both ends.
Q6: Do short jumpers need attenuators for NETGEAR pluggable transceiver module?
A: No. Moderate laser power avoids signal overload on short fiber connections.
Q7: What is the sensitivity of AGM731F replacement pluggable transceiver module?
A: ≤ -18 dBm receiver sensitivity, ensuring stable signal reception in standard MMF networks.
Q8: What connector does this pluggable transceiver module use?
A: Standard duplex LC UPC interface, compatible with mainstream multimode cabling systems.
Q9: Will reversed TX/RX affect pluggable transceiver module links?
A: Yes. Reversed polarity causes disconnection; cross wiring is required for valid links.
Q10: Is hot-swap available for this NETGEAR pluggable transceiver module?
A: Yes. This hot-swappable pluggable transceiver module supports live replacement without network outage.
Q11: Is bulk purchased pluggable transceiver module reliable?
A: High MTBF design ensures 7×24 stable operation for large-scale enterprise network projects.
Q12: Are third-party AGM731F pluggable transceiver module equal to original?
A: Yes. Matched core components deliver equivalent performance with better bulk procurement pricing.
Q13: Can commercial pluggable transceiver module work outdoors?
A: No. Commercial-grade modules are only for indoor constant-temperature environments.
Q14: Do wholesale pluggable transceiver module meet global certifications?
A: Yes. All bulk products comply with CE, FCC, RoHS and REACH standards.
Q15: How does low temperature affect pluggable transceiver module stability?
A: Sub-zero temperatures cause laser abnormalities; this module works stably at 0℃–70℃.
Packaging Options & Custom‑Packaging Solutions
Every transceiver module gets reliable ESD‑safe packaging out of the box. Standard packing is ready for immediate shipment, while custom‑printed packaging with your logo is available for bulk orders.
Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- 100% MSA-compliant modules with Cisco, Huawei,Dell,Juniper, and Arista compatibility
- ISO 9001:2015 certified manufacturing facility in Shenzhen
- Average lead time of 3–5 business days with DHL/FedEx express options
- Dedicated pre-sales engineering support for custom configurations
- Actual hardware,actual switches,actual results.we publish compatibility test video,eliminate compatibility anxiety. you can watch before you buy.
- We can provide inspection and shipping videos to make you feel as if you are right here with the product.
"We replaced 200 Cisco-branded SFPs with HYTOPTODEVICE equivalents across our spine layer — zero compatibility issues, 40% cost reduction."— Network Architect, Tier-2 ISP, Germany
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final inspection, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration
