| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-25GLRL-31-I | SFP28-25G-SR |
| 2 | Arista Networks | SFP-25GLRL-31-I | SFP28-10/25G-ESR |
| 3 | Intel | SFP-25GLRL-31-I | SFP28-25G-LR2-I |
| 4 | NVIDIA(Mellanox) | SFP-25GLRL-31-I | SFP28-25G-LR |
| 5 | Juniper | SFP-25GLRL-31-I | SFP28-25G-LR-I |
| 6 | Dell | SFP-25GLRL-31-I | SFP28-25G-ER30 |
| 7 | Generic | SFP-25G-LR2-I | SFP28-25G-ER |
| Juniper Compatible | SFP-25GLRL-31-I | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP28 | Max Data Rate | 25Gbps |
| Wavelength | 1310nm | Max Distance | 2km |
| Connector | Duplex LC | Transmitter Type | DFB 1310nm |
| Cable Type | SMF | Receiver Type | PIN |
| TX Power | -7~+2dBm | Receiver Sensitivity | < -12dBm |
| Max. Power Consumption | ≤1.2W | DOM/DDM | Fully Supported |
| Protocols | SFF-8472, SFF-8024, SFF-8431, SFF-8432 | Operation Temperature | -40 to 85°C (-40 to 185°F) |
Usage Guidelines & Best Practices
Fiber Compatibility: Designed exclusively for G.652 OS2 single-mode fiber. Multimode fibers (OM3/OM4) or incompatible connector polish types (e.g., APC if the module requires UPC) will cause high attenuation and reduce transmission range.
Maintenance & Polarity: Clean LC optical connectors regularly before insertion. Dust and debris on the end face can lead to signal loss and degrade 25GBASE-LR 2KM module performance.
Distance & Link Budget: Supports up to a 2 km transmission distance within the standard optical power budget. Excessive fiber splices, patch panels, or sharp bends will shorten the usable range.
Port Compatibility Check: This optic only works on native 25G SFP28 ports. It can physically insert into SFP+ slots but will not negotiate 25G speed. Confirm your hardware or multi-vendor switch supports 25GBASE-LR standard before plugging in
Industrial Temperature Handling: This industrial-grade module supports -40℃ ~ +85℃ wide-temperature operation. Ensure the cabinet ventilation and heat dissipation are maintained in field deployments; avoid direct exposure to sunlight, moisture, dust or corrosive gas to extend service life.





Q1: Can this industrial SFP28 25G LR transceiver run on Juniper industrial routing hardware without unapproved optic alerts? A: YES. HYTOPTODEVICE pre-flashes custom EEPROM for Junos OS, so this Juniper-compatible industrial SFP28 25G LR module works on Juniper networking hardware without transceiver warning logs after factory burn-in validation.
Q2: Can this wide-temperature Juniper compatible SFP28 25G LR module sustain stable 25G links inside outdoor industrial cabinets from -40℃ to +85℃? A: YES. The HYTOPTODEVICE industrial-grade SFP28 25G LR transceiver passes full temperature cycling testing across -40℃ ~ +85℃, maintaining reliable 2km fiber links for outdoor industrial cabinet deployments.
Q3: Is it possible to insert this Juniper compatible SFP28 25G LR module into an SFP+ port and negotiate lower 10G speed? A: NO. This HYTOPTODEVICE SFP28 25G LR module fits physically into SFP+ slots, but cannot negotiate 10G speed. It only operates correctly on native SFP28 25G ports.
Q4: Does the Juniper compatible industrial SFP28 25G LR transceiver from HYTOPTODEVICE support DDM real-time optical diagnostic monitoring? A: YES. This SFP28 25G LR module includes DDM/DOM function to monitor real-time optical power, module temperature and supply voltage, simplifying maintenance for industrial fiber networks.
Q5: Must OS2 single-mode fiber be used to achieve the full 2km rated reach of this Juniper compatible 25GBASE-LR transceiver? A: YES. The HYTOPTODEVICE SFP28 25G LR industrial module reaches its maximum 2km transmission distance only over OS2 single-mode fiber; multimode fiber brings excessive attenuation and link dropouts.
Q6: Will HYTOPTODEVICE charge extra fees for EEPROM reconfiguration when buying this Juniper compatible SFP28 25G LR module for multi-vendor mixed networks? A: NO. HYTOPTODEVICE provides complimentary EEPROM reprogramming service for this industrial SFP28 25G LR transceiver to support cross-brand mixed network rollouts for buyers.
Q7: Can buyers order pre-project samples to test this Juniper compatible industrial SFP28 25G LR transceiver before bulk purchase? A: YES. HYTOPTODEVICE offers pre-order sample validation for system integrators and distributors to test the performance of this SFP28 25G LR industrial transceiver before mass purchase.
Q8: Will purchasing this third-party Juniper compatible industrial SFP28 25G LR transceiver void the hardware warranty of my Juniper switch or router? A: NO. This MSA-compliant HYTOPTODEVICE SFP28 25G LR industrial module will not void Juniper hardware warranty, widely adopted by global system integrators for industrial networking projects.
Q9: Is enabling FEC required to guarantee stable 25G fiber links for this Juniper compatible industrial SFP28 25G LR optical transceiver? A: NO. FEC is optional for the 2km short reach of this HYTOPTODEVICE SFP28 25G LR module. Turning on FEC improves link margin for industrial fiber links with minor signal attenuation.
Q10: Can this Juniper compatible industrial SFP28 25G LR transceiver be purchased for 5G fronthaul optical interconnection projects? A: YES. HYTOPTODEVICE designs this wide-temperature SFP28 25G LR module to meet 5G fronthaul requirements, supporting stable short-distance optical interconnection for carrier-grade industrial networks.
Q11: What MOQ applies when buyers want private label branding on this Juniper compatible SFP28 25G LR industrial transceiver? A: Flexible low MOQ. HYTOPTODEVICE accepts small batch private label orders for this SFP28 25G LR module, supporting custom branding for global wholesalers and distributors.
Q12: Does this Juniper compatible industrial SFP28 25G LR module support hot swap while the industrial network remains live? A: YES. This HYTOPTODEVICE SFP28 25G LR transceiver supports hot-swap, allowing technicians to swap modules without powering down active industrial network equipment.
Q13: Can this Juniper compatible SFP28 25G LR industrial transceiver work with passive CWDM multiplexer network systems? A: NO. This module uses fixed 1310nm wavelength and is not optimized for CWDM passive mux architectures, which will cause severe signal degradation if deployed in such networks.
Q14: What quality inspections are run on each Juniper compatible industrial SFP28 25G LR transceiver before shipment from HYTOPTODEVICE? A: Every unit undergoes optical performance calibration, wide-temperature aging test and DDM inspection. HYTOPTODEVICE’s full QC workflow ensures consistent quality for global buyers of this SFP28 25G LR module.
Q15: Does HYTOPTODEVICE provide 24/7 technical support to troubleshoot link issues for buyers deploying this Juniper compatible SFP28 25G LR industrial transceiver? A: YES. HYTOPTODEVICE provides round-the-clock technical consultation for customers deploying this SFP28 25G LR industrial transceiver, quickly resolving compatibility and fiber link issues.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






