Ciena XCVR-Q80V31 Compatible QSFP28 100G ZR4 Transceiver | 100GBASE-ZR4 1310nm LAN WDM 80km Duplex LC/UPC Module HYTOPTODEVICE
Product Overview
HYTOPTODEVICE QSFP28 100G ZR4 transceiver is a drop‑in replacement for Ciena XCVR-Q80V31. Built to 100GBASE-ZR4 and QSFP28 MSA standards, this high-performance optic delivers stable 100Gbps transmission up to 80km over OS2 single‑mode fiber, with 1310nm LAN WDM wavelength via duplex LC/UPC connector; host RS‑FEC must be enabled for proper operation.
Pre‑programmed with Ciena-specific EEPROM data, it supports plug‑and‑play deployment and reduces unsupported transceiver alarms on Ciena network platforms. As a trusted manufacturer and supplier, HYTOPTODEVICE provides factory bulk stock, sample trial orders and OEM customization for wholesalers, distributors and system integrators deploying long‑distance metro and DCI fiber links.
Key Technical Specifications
| Ciena Compatible |
XCVR-Q80V31 |
Vendor Name |
HYTOPTODEVICE |
| Form Factor |
QSFP28 |
Max Data Rate |
103.125Gbps (4x 25.78Gbps) |
| Wavelength |
1295.56nm, 1300.05nm 1304.58nm, 1309.14nm
|
Max Distance |
80km |
| Connector |
Duplex LC/UPC |
Transmitter Type |
EML LWDM |
| Cable Type |
SMF |
Receiver Type |
SOA + PIN |
| Modulation (Electrical) |
4x 25G-NRZ |
TX Power |
1~6.5dBm |
| Power Consumption |
< 4.5W |
Receiver Sensitivity |
< -28dBm |
| Protocols |
QSFP28 MSA, SFF-8636, IEEE 802.3bm, CAUI-4 |
Operation Temperature |
0 to 70°C (32 to 158°F) |
For detailed technical specifications, please refer to the
Datasheet
Usage Guidelines & Best Practices
-
Fiber Choice: Works only with OS2 single-mode fiber. Multimode fiber is not compatible with this 1310nm LAN WDM module.
-
Optical Attenuator Required for Short Links: For testing or short‑distance connections (<15km), connect a 15dB–20dB optical attenuator to the RX port to prevent damaging the receiver.(15KM<Distance<35km,connect 10‑15dB optical attenuator),ensuring the received power between -28~-7dBm.
-
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
-
Installation Specification: Hot-swap supported. Follow ESD anti-static procedures and keep LC connectors clean for stable links.
- Mode Setting: Configure 100G port speed via switch CLI. This ZR4 module does not support breakout to 4×25G.
For detailed operation instructions, please refer to the
User Guide.
Full Compatibility List & Supported Network Hardware
1. Supported Hardware & Firmware
This module features Ciena-tailored EEPROM programming, minimizing transceiver warnings for Ciena network platforms. All products undergo full temperature burn‑in testing before shipment, compatible with the below Ciena hardware:
• Ciena 5100 Series
• Ciena 6500 Series
• Ciena 8700 Series
• Universal Compatibility: All network devices with standard QSFP28 ports supporting 100GBASE-ZR4 protocol
2. Multi-Brand Cross Compatibility
Built on universal MSA open standards, this QSFP28 transceiver works seamlessly with mainstream brands including Cisco, HPE, Juniper, Huawei, and Fortinet. It supports mixed‑vendor network upgrades for indoor data center environments.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Indoor long-distance campus & branch 80km point-to-point fiber links
• Carrier metro aggregation and long-haul backbone transmission
• Remote data center interconnection (DCI)
• 100G to 100G link for Switch‑Adapter Card inter‑connections
• 100G structured cabling deployment for data‑center and enterprise backbone infrastructure
• Network hardware upgrade for Ciena data center infrastructure
• Inventory supply for global distributors and system integrators working on metro network tender projects
Connectivity Solutions(Applications)
1.Leaf-Spine Architecture

2. 100G to 100G for Switch-Switch Interconnection

3.100G to 100G for Switch-NIC Connection

4.100G Structured Cabling

The Core Feature
1.Low Power Consumption for High-Density Deployment for Data Center
Low power draw supports high-density port layout in data center racks, saving system power budget for leaf-spine and metro switch deployments.

2.Verified Host Interoperability
All modules pass real target device interoperability tests. Matched EEPROM ensures zero-alarm hot-swap and stable long-term operation on mainstream platforms.

3.Strict Full-Round Quality Testing
Every module undergoes comprehensive test. Strict quality control (IQC/PQC/OQC/FQC) guarantees stable 24/7 commercial operation.

FAQ
Q1: Can this QSFP28 100G ZR4 optic work normally on standard QSFP28 100G switch ports?
A: Yes, this HYTOPTODEVICE Ciena compatible QSFP28 100G ZR4 transceiver fits native QSFP28 slots. No extra adapters needed for Ciena network gear, helping system integrators deploy metro DCI fiber links efficiently.
Q2: Will this compatible QSFP28 100G module trigger system alerts when inserted into Ciena equipment?
A: Network platforms may pop up alerts for non-original transceivers. Our custom EEPROM programming greatly minimizes warning messages, ideal for distributors sourcing compatible QSFP28 100G modules in bulk.
Q3: Can I mix transceivers sourced from different QSFP28 100G manufacturers on the two ends of a fiber link?
A: Stable link-up is only guaranteed when optical specs and RS-FEC settings fully match. Cross-manufacturer transceiver pairs carry interoperability risks, so HYTOPTODEVICE recommends matching transceiver sets for long-distance fiber transmission.
Q4: What specifications define this QSFP28 100G ZR4 optical transceiver?
A: There is no dedicated IEEE standard for 100G ZR4. This QSFP28 100G ZR4 module follows MSA multi-source agreements and vendor implementation specs to maintain hardware interoperability.
Q5: What maximum transmission distance can this QSFP28 100G ZR4 transceiver reliably support?
A: It delivers stable error-free 100Gbps transmission up to 80km over OS2 G.652 single mode fiber, perfect for metro and campus backbone deployments.
Q6: Is it possible to extend transmission distance beyond 80km with extra optical components?
A: Longer fiber distances over 80km can be realized with external EDFA optical amplifiers. Network designers need to complete full link budget calculation and check chromatic dispersion before long-haul deployment.
Q7: Does this QSFP28 100G ZR4 transceiver support real-time tracking of optical operating parameters?
A: Yes, DOM/DDM real-time monitoring is fully supported. Network operators can remotely view module temperature, laser bias, transmit and receive optical power to maintain metro 100G fiber links.
Q8: What is the power consumption level of this Ciena compatible QSFP28 100G ZR4 module?
A: This QSFP28 100G ZR4 transceiver consumes less than 4.5W, optimized for power-sensitive indoor data center infrastructure.
Q9: Are there thermal concerns when filling all QSFP28 ports in a high-density switch chassis?
A: Yes, fully populated dense port panels accumulate heat. Filling all QSFP28 slots with 100G transceivers may exceed safe temperature thresholds, thermal planning is required for data center cabinet design.
Q10: How will high ambient rack temperature impact QSFP28 100G ZR4 fiber link performance?
A: Higher surrounding temperature shifts laser bias points and reduces transmit optical power. Operators can detect changes early through DOM alerts to avoid unexpected link outages inside data center racks.
Q11: Which deployment scenarios are best suited for this QSFP28 100G ZR4 transceiver?
A: This module is built for controlled indoor environments such as data centers. Stable ambient temperature ensures consistent transmission performance for metro and DCI fiber interconnections.
Q12: What risks will buyers face if purchasing low-cost generic QSFP28 100G transceivers without factory testing?
A: Untested cheap transceivers come with high DOA risk, poor laser calibration and unstable BER performance. Distributors should choose fully factory-tested QSFP28 100G optics from reliable suppliers like HYTOPTODEVICE.
Q13: How do manufacturing lead times affect large-scale QSFP28 100G network rollout plans?
A: Long-reach QSFP28 100G ZR4 optics are not mass-produced like short-reach SR4 modules, leading to longer production cycles. Buyers should place orders in advance to prevent delays for metro DCI construction projects.
Q14: What is the likelihood of receiving dead-on-arrival modules from a QSFP28 100G optical module factory?
A: Trusted manufacturers maintain DOA rates below 0.1% with strict quality control. Each HYTOPTODEVICE QSFP28 100G ZR4 transceiver passes optical loopback and temperature burn-in before shipment for bulk wholesale customers.
Q15: What certifications should a qualified QSFP28 100G optical transceiver supplier provide?
A: Qualified QSFP28 100G transceivers require CE, FCC, RoHS and Class 1 Laser safety certifications. HYTOPTODEVICE can provide full certification documents for distributors and system integrators for project audit and customs clearance.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

