XBR-TWX-0.5 Brocade Compatible 0.5M SFP+ Passive DAC Cable | 10GBASE-CU Copper Twinax Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE is a trusted supplier for SFP+ passive dac cable wholesale, providing this XBR-TWX-0.5 Brocade compatible 0.5m 10GBASE-CU SFP+ passive twinax DAC cable. This passive copper direct attach cable features near-zero power consumption and ultra-low latency, manufactured per MSA and SFF-8431 standards. It is widely used for short in-rack connections between Brocade SAN switches, servers and storage arrays. Every cable passes strict continuity and signal integrity testing before shipment. We support sample validation, custom EEPROM programming, OEM private labeling and bulk wholesale orders with flexible MOQ for storage integrators, data center operators and global distributors. All units are covered by our 5-year factory warranty.
Key Technical Specifications
| Brocade Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
0.5m (1.6ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target Cisco hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Brocade Hardware & Firmware
● Brocade G610 / G620 / G630 SAN storage switches
● Brocade 7800 series extension switches
● Brocade X6 director chassis with 10G SFP+ ports
● Brocade 10G SFP+ storage network interface cards
● Brocade fabric OS managed storage fabrics
Minimum supported FOS firmware version: FOS 8.0 and above
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this SFP+ passive dac cable wholesale product supports mixed-vendor networking hardware. It interoperates smoothly with Cisco, Arista, H3C, Dell, Juniper, NVIDIA Mellanox and other mainstream 10G SFP+ switches and NICs, suitable for mixed-brand rack stacking and storage fabric expansion.
3. Free Value-Added Services
- Custom firmware for multi-device compatibility
- Support sample testing before bulk orders for project pre-verification
- Private-label customization and professional deployment guidanc
- Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
● Ultra-short in-cabinet 10G links between adjacent Brocade SAN switches
● Server to storage switch connections within the same rack
● Low-latency 10G links for enterprise block storage SAN networks
● Dense rack 10G storage fabric for virtualization and backup systems
● Intra-chassis short connections for Brocade director-based fabrics
● Bulk supply for storage distributors, system integrators and IT contractors
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the SFP+ passive DAC cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The SFP+ passive DAC cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Is HYTOPTODEVICE XBR-TWX-0.5 fully plug-and-play on genuine Brocade ICX switches?
A: Yes, prewritten Brocade exclusive EEPROM enables hot plug directly without firmware update or compatibility error on original Brocade hardware.
Q2: Does HYTOPTODEVICE XBR-TWX-0.5 passive DAC cable support DDM/DOM real-time monitoring?
A: No, passive twinax design excludes monitoring circuit and chip; only basic EEPROM info saved. Select active DAC if DDM monitoring is required.
Q3: What is fixed physical length of XBR-TWX-0.5 Brocade DAC?
A: Standard fixed length is 0.5M for ultra-short in-rack use; HYTOPTODEVICE stocks 0.3M/1M/2M/3M alternative DAC for different rack layouts.
Q4: Can HYTOPTODEVICE compatible XBR-TWX-0.5 connect non-Brocade SFP+ switches and server NIC?
A: Yes, MSA-compliant design guarantees universal compatibility across all mainstream SFP+ interface network devices from multiple vendors.
Q5: What cost benefits choosing HYTOPTODEVICE vs original Brocade XBR-TWX-0.5 OEM cable?
A: Same compatibility and performance with OEM, 35%~55% lower bulk cost, in-stock fast global delivery and dedicated factory aftersales support.
Q6: Does XBR-TWX-0.5 support hot swap under powered-on device status?
A: Designed per SFP+ hot-plug standard, safe plug/unplug without shutting down running switches or servers.
Q7: How much power consumption for XBR-TWX-0.5 passive DAC?
A: Less than 0.1W per end connector, nearly zero power loss for energy-saving data center build.
Q8: What standard operating temperature range for regular IDC usage?
A: Commercial grade:0℃~70℃; wide-temperature customized DAC available upon large bulk OEM order for harsh non-air-conditioned cabinet.
Q9: Does HYTOPTODEVICE provide OEM private label & custom cable marking for distributors?
A: Flexible MOQ supports private packaging, laser marking and personalized EEPROM programming for global resellers’ OEM needs.
Q10: What’s the warranty policy of HYTOPTODEVICE XBR-TWX-0.5 DAC?
A: All in-stock products enjoy 5-year factory warranty; free replacement for defective goods under normal installation & usage.
Q11: Can I use one DAC cable to connect two different switch brands (e.g., Cisco to Ubiquiti)?
A: Yes, it can establish a working link if both switches support 10GBASE-CU and do not enforce strict vendor lock. HYTOPTODEVICE SFP+ passive DAC cables follow MSA standards for cross-brand interconnection, we suggest sample testing prior to mixed-vendor deployment.
Q12: What happens if my switch displays an "Unsupported Transceiver" or "Vendor Lock" error?
A: The switch firmware did not recognize the EEPROM code. You can bypass this on some platforms via CLI commands (e.g., service unsupported-transceiver on Cisco), but buying pre-coded compatible cables prevents these warnings. HYTOPTODEVICE pre-writes dedicated codes and conducts target-device testing before shipment to resolve this issue effectively.
Q13: Are generic MSA-compliant 10G sfp+ passive DAC cables guaranteed to work on all open switches?
A: MSA (Multi-Source Agreement) compliance guarantees physical dimensions and electrical standards. While generic MSA cables work on open platforms like MikroTik or Netgear, locked systems like Cisco or HP ProCurve require proprietary EEPROM signatures. Every HYTOPTODEVICE cable passes target switch testing before shipment to reduce deployment risk.
Q14: What is the maximum recommended transmission distance for a sfp+ passive DAC cable?
A: Standard 10G passive twinax DAC supports up to 7 meters. Our XBR-TWX-0.5 Brocade compatible 0.5M SFP+ passive DAC cable is optimized for ultra-short intra-rack connections with excellent signal integrity.
Q15: Should I choose 24AWG, 26AWG, or 30AWG for my rack setup?
A: Use 30AWG for 0.5m–2m (maximum flexibility), 26AWG for 3m–5m (balanced), and 24AWG for 5m–7m (thicker, lower signal loss). Our 0.5M Brocade DAC adopts 30AWG which suits dense cabinet cabling perfectly.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

