SFP-H10GB-CU5M Cisco Compatible SFP+ Direct Attach Cable 5m | 10GBASE-CU Passive Twinax Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE is a reliable sfp+ direct attach cable manufacture, offering this Cisco SFP-H10GB-CU5M compatible 5m 10GBASE-CU SFP+ to SFP+ passive twinax DAC cable. Designed and manufactured under MSA and SFF-8431 standards, this passive twinax copper cable features zero power consumption and low latency. It suits medium-long range in-rack stacking, server and storage interconnection for Cisco enterprise and data center switching fabrics. Every cable from our sfp+ direct attach cable manufacture goes through strict continuity and signal integrity testing before delivery. We support sample validation, custom EEPROM programming, OEM private labeling, fast global shipping and bulk wholesale orders with flexible MOQ for data center integrators, network distributors and global buyers.
Key Technical Specifications
| Cisco Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
5m (16.4ft) |
Wire AWG |
AWG 24 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Cisco Hardware & Firmware
● Cisco Nexus 9000 / 7000 / 5000 series data center switches
● Cisco Catalyst 9300X / 3650X 10G enterprise switches
● Cisco UCS servers with 10G SFP+ NIC
● Cisco MDS storage switches
● Cisco NX-OS / IOS-XE operating system
Minimum supported firmware: NX-OS 9.2 and above
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this cable from our sfp+ direct attach cable manufacture supports mixed-vendor networking hardware. It interoperates smoothly with Arista, H3C, Juniper, Dell, NVIDIA/Mellanox and other mainstream 10G SFP+ switches and NICs, suitable for mixed-brand rack stacking and network fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Cisco switch to server 10G rack trunk uplink
• Intra-rack Cisco switch stacking interconnection
• Leaf-spine fabric short-range interconnection
• Virtualization cluster and storage fabric interconnection
• Stock sourcing and bulk purchase for distributors, wholesalers and network resellers
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 10gb SFP+ DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive SFP+ 10G DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: As a reseller, can I buy this Cisco compatible 10gb sfp+ dac cable to connect multi-vendor network hardware for my clients?
A: Yes, this HYTOPTODEVICE 10gb sfp+ dac cable supports cross-brand interconnection if both sides follow the 10GBASE-CU MSA standard. Consistent port configuration ensures stable cross-vendor links between Cisco and other brand hardware.
Q2: For wholesalers who procure these DACs for future customer projects, can the EEPROM signature be modified later?
A: Yes, HYTOPTODEVICE offers EEPROM reprogramming service for our bulk 10gb sfp+ dac cable. We provide coding tools for distributors to rewrite signatures when clients migrate to new network hardware platforms.
Q3: Can HYTOPTODEVICE provide custom printed cable label for SFP-H10GB-CU5M substitute DAC?
A: Custom marking service is available for all bulk order clients purchasing from our sfp+ direct attach cable manufacture, customize label content including customer part code or company logo.
Q4: Does this SFP-H10GB-CU5M compatible DAC support all Cisco NX-OS firmware versions?
A: All cables from our sfp+ direct attach cable manufacture pass multi-version Cisco NX-OS compatibility testing, compatible with mainstream Cisco firmware released in recent years; send exact switch model for pre-verification if needed.
Q5: Is small sample order acceptable to test SFP-H10GB-CU5M compatibility on local Cisco hardware?
A: Sample testing order is welcomed for system integrators and end-users to verify port identification of our sfp+ direct attach cables before formal bulk purchase.
Q6: When distributors procure 5-meter twinax links, is active DAC a better choice than passive 10gb sfp+ dac cable?
A: No, passive DAC is preferred for runs under 7 meters, including our 5m HYTOPTODEVICE Cisco compatible 10gb sfp+ dac cable. Passive types consume <0.1W with simpler structure while active DAC adds signal amplification with extra power draw and higher cost.
Q7: Which cabling option helps resellers control project cost for their clients: 10gb sfp+ dac cable or fiber plus separate SFP+ optics?
A: 10gb sfp+ dac twinax cable is more cost-effective for short intra-rack links, and our HYTOPTODEVICE bulk 10gb sfp+ dac pricing beats the combined cost of transceivers plus fiber patch cords. Fiber becomes economical only for distances over 7–10 meters.
Q8: Will the 10gb sfp+ dac cable stocked by our wholesale team deliver lower latency than fiber or RJ45 copper links?
A: Yes, 10G passive twinax DAC delivers lower latency than fiber and 10G RJ45 copper. Our HYTOPTODEVICE 10gb sfp+ dac cable removes optical conversion steps, cutting latency to sub-nanosecond levels for low-latency trading and HPC clusters.
Q9: Can this stocked 10gb sfp+ dac cable auto downgrade speed to connect legacy 1G switches for end customers?
A: No, our 10GBASE-CU 10gb sfp+ dac cable locks to 10G rate. 10GBASE-CU standard does not support auto-negotiation fallback to 1G or 100M, so both connected ports must be set manually to 10G.
Q10: What temperature rating should distributors check before purchasing 10gb sfp+ dac cable for hot aisle data center projects?
A: Our standard commercial-grade HYTOPTODEVICE 10gb sfp+ dac cable runs 0℃ ~70℃. For hot aisles or industrial racks, we supply industrial temperature variants rated -40℃ ~85℃ for stable continuous operation.
Q11: How many hot-plug cycles can the pull latch withstand, important for resellers supplying maintenance-heavy server rooms?
A: The pull tab and latch on HYTOPTODEVICE 10gb sfp+ dac cable are tested for over 500 hot-plug cycles. Reinforced plastic tabs prevent breakage during frequent re-cabling inside dynamic data center environments.
Q12: Can the 10gb sfp+ dac cable bought from our stock work when plugged into old 1G SFP ports on legacy network hardware?
A: No, 10G SFP+ DAC cannot negotiate or work on a native 1G SFP port. Our HYTOPTODEVICE 10GBASE-CU 10gb sfp+ dac cable requires SFP+ 10G-capable ports on both ends to establish a link.
Q13: Why generic uncoded twinax cables fail link negotiation on Cisco switches when distributors deliver to their buyers?
A: This usually comes from mismatched EEPROM signature. Our HYTOPTODEVICE Cisco SFP-H10GB-CU5M compatible 10gb sfp+ dac cable can be pre-coded with Cisco signature to work smoothly with Cisco switches and bypass identity checks for stable link activation.
Q14: What quality testing is completed before we ship stocked 10gb sfp+ dac cable for wholesale orders?
A: You can verify compliance by BER testing, insertion loss and return loss measurement. Every HYTOPTODEVICE bulk 10gb sfp+ dac cable passes target switch testing and MSA SFF-8431 validation before shipment.
Q15: What diagnostic information can DDM/DOM output on the passive 10gb sfp+ dac cable we supply to distributors?
A: DDM/DOM is digital diagnostic monitoring for transceiver parameters, and our HYTOPTODEVICE 10gb sfp+ dac cable supports basic DDM readout. Passive DACs report cable and identity data but do not monitor optical power values.
Q16: What BER benchmark should wholesalers require for 10gb sfp+ dac cable deployed in production Cisco data centers?
A: The target BER for stable 10GBASE-CU DAC links is ≤1×10⁻¹². All HYTOPTODEVICE 10gb sfp+ dac cable are tested to hit this BER threshold to eliminate CRC errors for 24/7 data center operation.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

