SFP-H10GB-CU50CM Cisco Compatible 0.5M SFP+ Passive Cable| 10G Copper Twinax DAC Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE supplies this Cisco SFP-H10GB-CU50CM compatible 0.5m 10G SFP+ passive twinax DAC cable. As a reliable sfp+ passive cable supplier, we deliver passive copper direct attach cables with zero power consumption, ultra-low latency and simple plug-and-play deployment. This 10G twinax DAC follows SFF-8431 and MSA standards, widely used for short-distance switch-to-switch, switch-to-server top-of-rack interconnections. Every cable undergoes full continuity and signal integrity testing before shipment. We support sample testing, custom EEPROM coding, OEM private label and bulk wholesale with flexible MOQ for system integrators and data center contractors.
Key Technical Specifications
| Cisco Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
0.5m (1.6ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Cisco Hardware & Firmware
● Cisco Catalyst 9300 Series SFP+ switches
● Cisco Nexus 9000 Series 10G leaf switches
● Cisco UCS C-Series rack servers with SFP+ ports
● Cisco MDS storage switches with 10G SFP+ interfaces
● Cisco Firepower 10G SFP+ security appliances
Minimum supported firmware: IOS / NX-OS standard release
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this sfp+ passive cable supplier product supports mixed-vendor networking hardware. It interoperates smoothly with Arista, H3C, Dell, Juniper, NVIDIA Mellanox and other mainstream 10G SFP+ switches and NICs, suitable for mixed-brand rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
● Short-range 10G interconnections between adjacent top-of-rack switches
● Server to local switch links inside the same cabinet
● Low latency 10G connections for financial trading nodes
● 10G storage SAN short-distance internal cabling
● Dense rack 10G fabric for enterprise data centers
● Bulk supply for distributors, system integrators and IT contractors
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the SFP+ passive cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive SFP+ 10G DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQS
Q1: Is HYTOPTODEVICE SFP-H10GB-CU50CM fully plug-and-play on original Cisco Catalyst & Nexus switches?
A: Yes, customized Cisco exclusive EEPROM is pre-programmed on both cable terminals, supporting hot plug directly with no extra firmware update or port error prompt on authentic Cisco hardware.
Q2: Does SFP-H10GB-CU50CM passive twinax DAC support DDM/DOM real-time operational parameter monitoring?
A: No, passive DAC structure excludes DDM monitoring circuitry and chips, only basic EEPROM information including part number, length and transmission speed is saved for device identification; choose our active DAC variant if DDM function is required.
Q3: What is the fixed physical length of this SFP-H10GB-CU50CM Cisco replacement DAC?
A: Standard fixed length is 0.5 meter, exclusively designed for ultra-short within-rack deployment; HYTOPTODEVICE supplies optional 0.3M/1M/2M/3M alternative DAC for varied rack layout demands.
Q4: Can SFP-H10GB-CU50CM DAC connect non-Cisco branded SFP+ switches and generic server NIC?
A: Absolutely, fully compliant with global SFP+ MSA specification and compatible with all SFP+ interface network adapters and enterprise switches across multi-vendor brands.
Q5: What core cost benefits of selecting HYTOPTODEVICE replacement DAC versus genuine Cisco SFP-H10GB-CU50CM OEM cable?
A: Identical electrical performance and full hardware interoperability with original Cisco cabling, 35%~55% lower bulk purchase cost, ready-in-stock fast global delivery and dedicated after-sales technical support from our factory.
Q6: Does SFP-H10GB-CU50CM support hot swap on powered-on running Cisco network equipment?
A: The DAC follows standard SFP+ hot-plug specification, allowing safe plug and unplug operation without powering down switches or connected servers.
Q7: How much power consumption does SFP-H10GB-CU50CM passive copper DAC consume during operation?
A: Ultra-low power draw less than 0.1W per end connector, significantly more energy-saving compared with optical transceivers and active DAC products for green data center construction.
Q8: What standard operating temperature range for regular IDC cabinet environment deployment?
A: Commercial working temperature range: 0°C ~70°C; customized wide-temperature industrial-grade DAC is available upon large-quantity OEM order for non-air-conditioned harsh cabinet conditions.
Q9: Does HYTOPTODEVICE provide OEM private labeling and custom cable marking for global network distributors?
A: Flexible minimum order quantity supports private brand packaging, laser printed cable marking and personalized EEPROM programming to meet reseller customized wholesale cooperation requirements.
Q10: What warranty coverage is offered for HYTOPTODEVICE SFP-H10GB-CU50CM Cisco compatible DAC cables?
A: All in-stock SFP-H10GB-CU50CM series DAC comes with standard 3-year factory warranty, free replacement service for defective products under normal installation and proper usage.
Q11: Can this 0.5m Cisco compatible SFP+ passive DAC run on 1G SFP ports?
A: No, this SFP+ passive twinax DAC is designed for fixed 10GBASE-CU operation. It cannot negotiate down to 1G speed and will fail to link when plugged into 1G SFP ports. Deployment requires native SFP+ 10G ports.
Q12: Can this passive SFP+ DAC interoperate with SFP+ optical transceivers on the same link?
A: No. Twinax copper DAC follows 10GBASE-CU electrical standard, while optical modules use optical signal transmission. Both link ends must deploy matching DAC cables to establish a valid connection.
Q13: Can I mix different DAC lengths in one bulk purchase and get pre-coded for Cisco?
A: Yes. HYTOPTODEVICE supports mixed-length DAC orders with unified Cisco EEPROM programming. It is convenient for integrators who need multiple short stacking cable specifications in one data center project.
Q14: Can this 0.5m passive twinax DAC support transmission over multimode fiber?
A: No. This is a copper twinax direct attach assembly, not an optical transceiver. It transmits electrical signals over internal copper conductors and cannot work with fiber jumpers.
Q15: Why choose passive SFP+ twinax DAC instead of short-range optical modules for intra-rack 10G links?
A: Passive DAC has zero power consumption and ultra-low latency. It removes optical conversion loss and reduces overall CAPEX, which is the preferred cost-saving solution for fixed short intra-rack stacking links.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

