| NO. | Brand | Compatible P/N | Remarks |
| 1 | Cisco | DS-SFP-FC8G-SW | |
| 2 | Brocade | XBR-000147 | |
| 3 | HPE | AJ716A | |
| 4 | IBM | 45W0500 | |
| 5 | Intel | TXN31118D100000 | |
| 6 | Juniper Networks | QFX-SFP-8GFC-SW | |
| 7 | Qlogic | SFP8-SW-1PK/AJ718A |
| Qlogic Compatible | SFP8-SW-1PK/AJ718A | Vendor Name | HYTOPTODEVICE |
| Form Factor | SFP+ | Max Data Rate | 8.5Gbps |
| Wavelength | 850nm | Max Distance | 150m |
| Connector | Duplex LC | Transmitter Type | VCSEL 850nm |
| Cable Type | MMF | Receiver Type | PIN |
| TX Power | -6.5~-0.5dBm | Receiver Sensitivity | < -10.5dBm |
| Power Consumption | ≤1W | Receiver Overload | 0.5dBm |
| Protocols | MSA Compliant | Operation Temperature | 0 to 70°C (32 to 158°F) |
Usage Guidelines & Best Practices
Fiber Choice: Always use OM3/OM4 fiber cables. Avoid legacy OM1/OM2 cables due to severe distance limitations.
Connector Match: Use UPC/PC (blue/black) connectors. Inserting an APC (green) connector will physically damage the module's optical interface.
Cleanliness & Dust: Keep dust caps on whenever unattached. Clean fiber end-faces with a optical cleaning pen before insertion; dust causes over 80% of optical link failures.
Link Tuning: If auto-negotiation fails with legacy SAN switches, manually lock the port speed to 8Gbps or 4Gbps.
Handling: Wear an ESD wrist strap during installation. Maintain a minimum fiber bend radius of 30 mm to prevent micro-bends and optical power loss.
Installation & Hot-Swap Rules
Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.
Operating Environment
Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.





“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.






