| NO. | Brand | Compatible P/N | Transceive Type |
| 1 | Cisco | SFP-H25G-CU3M | |
| 2 | Arista Networks | CAB-S-S-25G-3M | |
| 3 | Dell | DAC-SFP-25G-3M | |
| 4 | H3C | SFP-25G-D-CAB-3M | |
| 5 | Juniper | JNP-25G-DAC-3M | |
| 6 | NVIDIA(Mellanox) | MCP2M00-A003 | |
| 7 | HPE Aruba | JL488A | |
| 8 | HPE | 844477-B21 |
| NVIDIA(Mellanox) Compatible | MCP2M00-A003 | Vendor Name | HYTOPTODEVICE |
| Connector | SFP28 to SFP28 | Max Data Rate | 25Gbps |
| Cable Length | 3m (10ft) | Wire AWG | AWG 26 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius | 21mm | Application | 25G Ethernet, Data Center, 5G Wireless |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this SFP28 25G twinax cable can interoperate with mainstream network brands including Cisco, Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Can this NVIDIA(Mellanox) compatible SFP28 to SFP28 25G twinax cable run full 25G rate stably on Spectrum switches and ConnectX NICs? A: Yes, this HYTOPTODEVICE SFP28 to SFP28 25G twinax cable supports full 25.78125Gbps line rate. It is pre-programmed with Mellanox EEPROM and validated for reliable 25GBASE-CR links; RS-FEC is optional for this 3m length.
Q2: What is the maximum reliable operating distance for an SFP28 to SFP28 25G twinax cable? A: The rated maximum reach for SFP28 to SFP28 25G twinax cable is 5 meters. This 3m variant stays within acceptable insertion loss budget for NVIDIA HPC rack deployments.
Q3: Can this SFP28 to SFP28 25G twinax cable connect NVIDIA Spectrum switches to other brand leaf switches? A: Cross-brand interconnection works reliably with unified 25GBASE-CR and matching FEC settings. This SFP28 to SFP28 25G twinax cable follows MSA standards for multi-vendor RoCE fabrics.
Q4: What makes SFP28 to SFP28 25G twinax cable different from older SFP+ 10G twinax DAC? A: SFP28 to SFP28 25G twinax cable supports up to 25G bandwidth, while SFP+ twinax only reaches 10G. This cable is built to match NVIDIA modern high-speed RoCE networking ports.
Q5: What performance issues will appear if an SFP28 to SFP28 25G twinax cable exceeds its 5m limit? A: 25G high-speed copper suffers rapid signal attenuation beyond 5m. Longer lengths bring CRC errors and link flapping; select AOC active optical cables for longer rack-to-rack runs.
Q6: Which NVIDIA workloads get the biggest latency gain with this SFP28 to SFP28 25G twinax cable? A: RoCE RDMA, NVMe-oF storage and GPU HPC clusters benefit most. This HYTOPTODEVICE SFP28 to SFP28 25G twinax cable maintains steady ultra-low latency.
Q7: Can this 3m SFP28 to SFP28 25G twinax cable link two ConnectX NICs point-to-point directly? A: Direct NIC-to-NIC interconnection is fully supported under proper port configuration. This SFP28 to SFP28 25G twinax cable works great for GPU node sync inside HPC racks.
Q8: How does AWG wire gauge impact signal performance of a 3m SFP28 to SFP28 25G twinax cable? A: 30AWG balances flexible routing and acceptable signal loss for 3m runs; 26AWG provides better loss margin close to the 5m threshold. This cable uses 30AWG twinax optimized for dense GPU racks.
Q9: Will NVIDIA firmware upgrades for Spectrum or ConnectX affect cable identification? A: MSA-compliant SFP28 to SFP28 25G twinax cable remains compatible across mainstream NVIDIA firmware releases. Preloaded Mellanox EEPROM ensures reliable recognition after updates.
Q10: When should AOC fiber replace SFP28 to SFP28 25G twinax cable inside NVIDIA AI/HPC fabrics? A: Choose active optical cables for cross-rack connections or distances over 5 meters. SFP28 to SFP28 25G twinax cable is zero-power and cost-effective for intra-rack RoCE links.
Q11: What latency saving can SFP28 to SFP28 25G twinax cable deliver compared with fiber plus transceivers? A: SFP28 to SFP28 25G twinax cable cuts roughly 30–60ns latency by removing optical-electrical conversion. This advantage is critical for low-latency RoCE compute traffic.
Q12: Can this SFP28 to SFP28 25G twinax cable negotiate 25G speed on legacy SFP+ 10G NVIDIA ports? A: 25G negotiation cannot complete on SFP+ ports due to different electrical specifications. Both ends require native SFP28 ports to run this cable at full bandwidth.
Q13: Can QSFP28 breakout DAC substitute this SFP28 to SFP28 25G twinax cable on NVIDIA SFP28 ports? A: Breakout DAC uses separate pin definition and split logic. It cannot replace this standard point-to-point SFP28 to SFP28 25G twinax cable.
Q14: What quality validation tests does HYTOPTODEVICE run on each batch? A: Every batch runs BER scanning, link verification and hot-swap testing on NVIDIA Spectrum and ConnectX platforms. Tests confirm EEPROM readability and stable 25G signal quality.
Q15: What installation restrictions should bulk buyers note for SFP28 to SFP28 25G twinax cable in NVIDIA fabric design? A: SFP28 to SFP28 25G twinax cable is engineered only for short intra-rack copper connections. It is not suitable for inter-row or long-distance cross-room transmission.
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




