• HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • NVIDIA(Mellanox) MC2609130-050 Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • NVIDIA(Mellanox) MC2609130-050 Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

NVIDIA(Mellanox) MC2609130-050 Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE, reliable factory supplier, supplies QSFP+ 40G to 4x10G Breakout Cable with ready inventory for buyers, distributors and system integrators. This 0.5m NVIDIA Mellanox MC2609130-050 compatible passive twinax breakout DAC converts one 40G QSFP+ port into four independent 10G SFP+ lanes, pre-programmed for Mellanox ConnectX-3 / ConnectX-4 adapters. Purchase bulk QSFP+ 40G to 4x10G Breakout Cable for HPC and data center cluster networking.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-4SFP10G-CU50CM
2 Arista Networks CAB-Q-S-0.5M
3 Juniper QFX-QSFP-DACBO-50CM
4 Brocade  40G-QSFP-4SFP-C-0105 
5 Dell 332-1365
6 Intel  X4DACBL50 
7 NVIDIA/Mellanox  MC2609130-050
8 IBM  BN-QS-SP-CBL-50CM
Description

NVIDIA(Mellanox) MC2609130-050 Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 0.5M QSFP+ 40G to 4x10G Breakout Cable acts as direct drop-in replacement for NVIDIA Mellanox part MC2609130-050. This passive fan-out twinax cable follows SFF-8436 and SFF-8431 MSA standards, splitting a single 40G QSFP+ port into four separate 10G SFP+ Ethernet channels. It requires no power supply and supports hot swap during routine maintenance.
We keep stable inventory of this QSFP+ 40G to 4x10G Breakout Cable for buyers, wholesalers and IT integrators. Every cable is preloaded with Mellanox-matched EEPROM signatures to reduce unsupported-media alerts on ConnectX-3 and ConnectX-4 network adapters. Bulk procurement, sampling and custom OEM private labeling are open for distributors, HPC system builders and data center contractors.

Key Technical Specifications

NVIDIA(Mellanox) Compatible
 MC2609130-050 
Vendor Name HYTOPTODEVICE
Connector QSFP+ to 4 x SFP+ Max Data Rate 40Gbps
Cable Length 0.5m (1.6ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.5W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols SFF-8436, SFF-8431 and QSFP+ MSA
Minimum Bend Radius 21mm Application 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Breakout Configuration: Ensure the host QSFP+ port supports channelization. Enable breakout mode (4x10G) via the switch CLI before connecting the cable.

  • Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Do not mix this breakout DAC with straight QSFP+ to QSFP+ DAC configuration.

  • Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: 0‑70℃, indoor cabinet deployment only.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated NVIDIA(Mellanox) Hardware & Firmware

  • Mellanox ConnectX-3, ConnectX-4 40G Ethernet adapters
  • NVIDIA Mellanox MSN2410, MSN2700 series Spectrum switches
  • Mellanox OCP 2.0 / 3.0 QSFP+ adapter modules

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 40G QSFP+ to 4 x 10G SFP+ passive breakout DAC cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 
  • HPC cluster server 40G ConnectX NIC breakout into four 10G uplink connections
  • High-density rack virtualization deployments to maximize port utilization
  • Short intra-rack interlinks for storage and compute node communication
  • Direct replacement for original Mellanox MC2609130-050 breakout twinax cable
  • Hyper-converged compute cluster local fan-out wiring
  • 10G iSCSI storage fabric links for GPU and compute servers
  • Stock replenishment purchase for IT distributors and system builders

Connectivity Solutions(Applications) 

1. 40G to 4x10G Breakout Link for Switch-Switch
HYTOPTODEVICE 40G QSFP+ to four 10G SFP+ passive copper breakout dac cable for switch to switch

The Core Feature

1. About 0.5W Passive Load, Near-Zero Heat

A 40G QSFP+ host fans out to four 10G SFP+ copper lines at ~0.5 W per splitter, no active components, barely any waste heat — purpose-built for close-range, in-rack and adjacent-rack interconnects.

hytoptodevice 40G QSFP+ to Four SFP+ passive  dac cable

2.Host-Device Tested for Proven Interoperability

Every splitter is link-up tested on real target switch models; ports come online on first install across major vendor gear, no field tuning or replacement loops. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 40G QSFP+ to 4 sfp+ twinax cable for data center

3. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  40g QSFP+ to 4 x sfp+ passive dac cable for switches

FAQ

Q1: Can I use different brand codings on each end (e.g., Cisco on the QSFP+ end and Dell on the SFP+ ends)? A: Yes, custom cross-brand EEPROM coding is available for your QSFP+ 40G to 4x10G Breakout Cable when you place an order. HYTOPTODEVICE supports separate programming for both ends to realize multi-vendor interoperability, ideal for system integrators with mixed-brand server and switch fleets.

Q2: Will this cable work interchangeably with HP, Arista, and Juniper equipment? A: No, each OEM network hardware requires its unique EEPROM signature. You need to provide exact device models during purchase, so HYTOPTODEVICE can pre-code the QSFP+ 40G to 4x10G Breakout Cable to match your target hardware.

Q3: Does this cable support secure locking mechanisms to prevent accidental disconnections? A: Yes, both QSFP+ and SFP+ connectors adopt standard industry latch and pull-tab design. The firm locking structure avoids accidental unplugging, a key benefit for wholesalers deploying QSFP+ 40G to 4x10G Breakout Cable inside dense server racks.

Q4: Will mixing this cable with OEM fiber transceivers in the same port group cause negotiation issues? A: No, DAC and fiber transceivers run independently on separate ports. As long as each interface is configured properly, distributors can mix media types without link negotiation faults when using HYTOPTODEVICE QSFP+ 40G to 4x10G Breakout Cable.

Q5: Do I need to buy matching brand cables for both ends of a direct switch-to-switch connection? A: You must match the EEPROM coding of each connector to the port it plugs into. HYTOPTODEVICE can set independent coding on QSFP+ and SFP+ branches for your QSFP+ 40G to 4x10G Breakout Cable according to your cabling plan.

Q6: Can this cable support full 40Gbps bidirectional throughput simultaneously? A: Yes, it delivers full wire-speed 40Gbps aggregate bandwidth. The four independent 10G lanes transmit and receive traffic at the same time, meeting high throughput demands for data center buyers purchasing this QSFP+ 40G to 4x10G Breakout Cable.

Q7: Do I need to manually configure my switch port to split the 40G port into 4x 10G ports? A: Yes, most switches require CLI channelization commands to enable breakout mode. Without this configuration, the switch cannot recognize the four 10G sub-channels of your HYTOPTODEVICE QSFP+ 40G to 4x10G Breakout Cable after installation.

Q8: What happens if I plug the QSFP+ end into a 100G QSFP28 port? A: QSFP+ follows 40G electrical specifications. It will not establish stable links on native 100G QSFP28 ports unless the platform supports special downshift functions, which cannot be guaranteed for stocked QSFP+ 40G to 4x10G Breakout Cable.

Q9: How do I verify if the switch is successfully recognizing all four breakout channels? A: You can run standard CLI commands to check interface status and inventory. This validation step is strongly recommended for IT contractors after deploying HYTOPTODEVICE QSFP+ 40G to 4x10G Breakout Cable on production switches.

Q10: Can I daisy-chain multiple breakout cables together to achieve longer distances? A: No, passive twinax DAC cables cannot be daisy-chained. Cascading cables will exceed signal loss thresholds and trigger link outages, so HYTOPTODEVICE QSFP+ 40G to 4x10G Breakout Cable is only for single-segment rack cabling.

Q11: Is the cable jacket plenum-rated (CMP) or riser-rated (CMR) for in-wall installation? A: Standard HYTOPTODEVICE QSFP+ 40G to 4x10G Breakout Cable uses PVC or LSZH jacket. It is engineered for intra-rack wiring only and not certified for plenum air spaces or concealed in-wall runs for reseller stock.

Q12: Does the cable generate heat during operation? A: No, passive twinax copper has no active chips and consumes zero power. It produces no thermal output, which makes this QSFP+ 40G to 4x10G Breakout Cable a preferred low-heat option for high-density HPC cluster procurement.

Q13: What is the outer diameter (OD) of the cable bundle? A: The main trunk outer diameter ranges 5mm–8mm and splits into thinner individual 10G legs. Its slim profile simplifies cable management for value-added resellers stocking the HYTOPTODEVICE QSFP+ 40G to 4x10G Breakout Cable.

Q14: Is the cable compliant with RoHS and environmental safety standards? A: Yes, all HYTOPTODEVICE QSFP+ 40G to 4x10G Breakout Cable pass RoHS testing. They are lead-free and environmentally compliant for global cross-border buyers and export orders.

Q15: Is there any risk of counterfeit chips or EEPROMs in third-party DAC cables? A: Low-quality third-party cables often carry uncertified counterfeit EEPROM chips and cause handshake failures. Buy your QSFP+ 40G to 4x10G Breakout Cable directly from HYTOPTODEVICE factory to avoid such compatibility risks for bulk inventory.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • NVIDIA(Mellanox) MC2609130-050 Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

Download