| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QDD-400-CU0.5M | |
| 2 | Arista Networks | CAB-D-D-400G-0.5 | |
| 3 | Dell | DAC-Q56DD-400G-0.5M | |
| 4 | NVIDIA/Mellanox | MCP1660-W00AE30 | |
| 5 | H3C | QSFPDD-400G-D-CAB-0.5M | |
| 6 | Generic | QSFPDD-400G-CUxM |
| NVIDIA/Mellanox Compatible |
MCP1660-W00AE30
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP-DD to QSFP-DD | Max Data Rate | 400Gbps |
| Cable Length | 0.5m (1.67ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0 |
| Minimum Bend Radius | 35mm | Application | 400G Ethernet and InfiniBand EDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.
Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 400G QSFP-DD passive direct attach copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.







Q1: Can this Mellanox-compatible 400G QSFP-DD DAC run stable Ethernet links on multi-brand Ethernet switches? A1: It depends on EEPROM coding. HYTOPTODEVICE passive direct attach copper twinax cable supports single-vendor or dual-vendor programming. With matched Ethernet coding, it achieves plug-and-play connectivity on NVIDIA Mellanox and other MSA-compliant QSFP-DD Ethernet switches.
Q2: Is a QSFP-DD cable backward compatible with older QSFP28 (100G) or QSFP56 (200G) ports? A2: Physically, QSFP-DD ports are designed to accept older QSFP28 or QSFP56 modules with certain physical and software limitations. However, this 400G QSFP-DD DAC cannot operate when inserted into legacy 100G/200G ports because of mismatched form factor and electrical lane definition.
Q3: Will using third-party 400G Ethernet DAC twinax cables void my NVIDIA network hardware warranty? A3: It will not automatically void your switch or NIC warranty. Our HYTOPTODEVICE passive direct attach copper twinax cable follows MSA and IEEE 802.3ck Ethernet standards. Vendors only reject warranty claims when cable defects directly cause permanent port damage.
Q4: Can I connect different brands of network interface cards (NICs) on each end of the cable? A4: Yes, provided each end is correctly coded or compatible with the respective hardware requirements of the connected servers or switches. HYTOPTODEVICE offers dual-sided custom EEPROM coding service to support mixed-brand NIC interconnection for bulk deployments.
Q5: Does this 400G QSFP-DD copper twinax cable support standard Ethernet auto-negotiation functions? A5: Yes. This HYTOPTODEVICE passive direct attach copper twinax cable supports IEEE Ethernet auto-negotiation. The negotiation function is handled by the switch/NIC firmware, not the passive cable itself.
Q6: What is the maximum reliable operating length for our passive 400G QSFP-DD Ethernet copper twinax cable? A6: Our maximum supported length for passive 400G QSFP-DD copper twinax is 3 meters. HYTOPTODEVICE supplies 0.5m, 1m, 2m and 3m variants; passive copper cannot maintain 400G PAM4 Ethernet signal integrity beyond 3m.
Q7: How does latency compare between 400G Ethernet DAC copper twinax and fiber optic Ethernet links? A7: 400G DAC copper latency is lower than fiber. Light travels slower in glass than electrical signals in copper, and DAC removes transceiver chip delay. HYTOPTODEVICE passive direct attach copper twinax cable delivers ultra-low latency ideal for AI cluster Ethernet workloads.
Q8: What wire gauge (AWG) is typically used in 400G QSFP-DD cables? A8: Short lengths including 0.5m and 1m use 30AWG for better flexibility. 2m and 3m versions adopt 28AWG to minimize signal attenuation. HYTOPTODEVICE matches the proper AWG for every length to stabilize 400G PAM4 signal transmission.
Q9: Can this 400G Ethernet DAC sustain continuous full line-rate Ethernet traffic without packet loss? A9: Yes, within rated length and proper operating conditions. Every HYTOPTODEVICE passive direct attach copper twinax cable passes line-rate Ethernet burn-in testing, supporting continuous 400G line-rate traffic with zero packet loss.
Q10: Can this Mellanox QSFP-DD DAC work for InfiniBand NDR, or is it built only for Ethernet? A10: This specific MCP1660-W00AE30 variant is pre-coded for Ethernet only. Our HYTOPTODEVICE 400G QSFP-DD DAC can be coded for Ethernet or InfiniBand NDR separately; please specify your required mode when placing bulk orders.
Q11: What latch design is fitted on the QSFP-DD connectors of these Ethernet twinax cables? A11: They use standard bail-clasp pull-tab latches. This is the mainstream design for HYTOPTODEVICE QSFP-DD cables, allowing easy, tool-free insertion and removal without damaging Ethernet ports or connectors.
Q12: Is this 400G Ethernet DAC suitable for inter-rack cabling across separate server racks in AI data centers? A12: Not recommended for most cross-rack deployments. Our passive 400G twinax max reach is 3m, which is only suitable for adjacent racks. Longer cross-rack Ethernet links require 400G AOC fiber cables instead.
Q13: Are custom jacket color options available for bulk orders of this Mellanox 400G Ethernet DAC cable? A13: Standard jacket color is black. HYTOPTODEVICE also supports custom jacket colors for bulk OEM orders, you can submit color requirements together with your Ethernet EEPROM coding request before production.
Q14: What troubleshooting steps apply when this 400G Ethernet DAC fails to bring up a link after plugging in? A14: The link will not establish and the switch may log Ethernet link-down errors. Check proper seating, verify EEPROM coding matches your Ethernet hardware, and inspect for over-bending. HYTOPTODEVICE technical team helps troubleshoot link-up issues.
Q15: Why is the cost of 400G Ethernet DAC twinax cables much lower than 400G Ethernet optical transceivers? A15: Passive DAC has no optical chips, lasers or photodiodes. HYTOPTODEVICE passive direct attach copper twinax cable uses only copper and shielding materials, cutting component cost compared to optical transceiver modules.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




