| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | Q56-200-CU3M | |
| 2 | Arista Networks | CAB-Q56-Q56-3M | |
| 3 | Dell | DAC-Q56-200G-3M | |
| 4 | NVIDIA/Mellanox | MCP1650-V003E26 | |
| 5 | H3C | QSFP56-200G-D-DAC-3M | |
| 6 | Generic | QSFP56-200G-CUxM |
| NVIDIA/Mellanox Compatible |
MCP1650-V003E26
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP56 to QSFP56 | Max Data Rate | 200Gbps |
| Cable Length | 3m (10ft) | Wire AWG | AWG 26 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE802.3cd, SFF-8436 |
| Minimum Bend Radius | 35mm | Application | 200G Ethernet and InfiniBand HDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP56 port must enable 200GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP56 200G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 200G QSFP56 passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Will this Mellanox compatible 200G passive copper twinax cable run on NVIDIA Spectrum-X Ethernet switches? A1: Yes. This HYTOPTODEVICE cable is pre-coded for Ethernet mode matching MCP1650-V003E26, validated for NVIDIA Spectrum-X switches. It establishes stable 200G PAM4 Ethernet links out of the box when firmware is compatible.
Q2: Will using third-party 200G Ethernet DAC cables void my NVIDIA network hardware warranty? A2: It will not automatically void the hardware warranty. This HYTOPTODEVICE passive copper twinax cable follows MSA and IEEE Ethernet specs. NVIDIA only denies warranty if cable defects directly cause permanent port damage.
Q3: Are these 200G twinax cables compliant with IEEE Ethernet industry standards? A3: Yes. Our HYTOPTODEVICE cable meets IEEE 802.3cd Ethernet and SFF-8636 MSA standards. Every unit is tested for Ethernet signal integrity metrics before shipment.
Q4: What modulation scheme is used for this 200G QSFP56 Ethernet passive copper twinax cable? A4: It uses PAM4 modulation. PAM4 carries 2 bits per symbol for 50G per lane, four lanes combine to hit 200Gbps Ethernet, the standard modulation for NVIDIA QSFP56 Ethernet DACs.
Q5: Is FEC mandatory for 200G Ethernet links over this passive copper twinax cable? A5: FEC is not required for this 3m Ethernet link within the rated passive distance. HYTOPTODEVICE’s cable maintains sufficient signal margin for 200G Ethernet; FEC can be enabled optionally for extra margin.
Q6: What latch style is equipped on these QSFP56 Ethernet connectors? A6: They adopt standard bail-clasp pull-tab latches. This is the mainstream latch design for QSFP56 Ethernet connectors on HYTOPTODEVICE twinax cables, easy for tool-free insertion and removal.
Q7: Can I use this 3m 200G Ethernet twinax cable for cross-rack Ethernet connections? A7: Not recommended. Passive copper twinax has tight signal limits for 200G PAM4 Ethernet. It is designed for intra-rack Ethernet runs; cross-rack Ethernet links should use AOC fiber cables.
Q8: Are these NVIDIA compatible 200G Ethernet passive copper twinax cables hot-swappable? A8: Yes, they support hot swap. This HYTOPTODEVICE cable follows QSFP56 hot-swap specs for Ethernet, you can plug/unplug while the NVIDIA Ethernet switch remains powered without port damage.
Q9: What warranty is offered for this 200G Ethernet DAC twinax cable? A9: HYTOPTODEVICE provides a 5-year warranty for this 200G Ethernet passive copper twinax cable. The warranty covers manufacturing defects affecting Ethernet link performance, connectors and shielding.
Q10: Can I order custom lengths or custom pin assignments for 200G Ethernet fabric deployment? A10: Custom lengths are available for bulk Ethernet orders. Custom pinouts need technical review first. HYTOPTODEVICE engineering team can deliver OEM Ethernet-focused cable solutions for system integrators.
Q11: Do these 200G Ethernet copper twinax cables meet global environmental safety regulations? A11: Yes. All HYTOPTODEVICE 200G Ethernet passive copper twinax cables pass RoHS and REACH testing, no restricted hazardous substances in jacket, conductors and shielding.
Q12: Is it safe to use tight plastic zip ties for cable management of these 200G Ethernet twinax cables? A12: Not recommended. Over-tight zip ties deform twinax pairs and shift impedance, causing Ethernet CRC errors and signal loss. Velcro straps are preferred for routing HYTOPTODEVICE high-speed Ethernet copper cables.
Q13: Can compressed air remove dust from QSFP56 Ethernet connector pins safely? A13: It can be used carefully. Keep the can upright and maintain distance to avoid liquid propellant. HYTOPTODEVICE suggests dry fiber cleaning sticks as the primary cleaning method for Ethernet ports.
Q14: What causes port flapping on 200G Ethernet passive copper twinax links? A14: Ethernet port flapping mainly comes from poor signal integrity, loose connector contact, over-bending, crushed twinax wiring, mismatched FEC settings or incorrect Ethernet EEPROM coding. HYTOPTODEVICE strict testing reduces such risks.
Q15: Can a damaged 200G Ethernet twinax cable be spliced or repaired for reuse? A15: No. Splicing breaks the controlled impedance of twinax pairs and ruins Ethernet signal integrity. HYTOPTODEVICE recommends direct replacement once the cable shielding or conductors are damaged.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




