| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-H25G-CU2M | |
| 2 | Arista Networks | CAB-S-S-25G-2M | |
| 3 | Dell | DAC-SFP-25G-2M | |
| 4 | H3C | SFP-25G-D-CAB-2M-A | |
| 5 | Juniper | JNP-25G-DAC-2M | |
| 6 | NVIDIA(Mellanox) | MCP2M00-A002 |
| Juniper Compatible | JNP-25G-DAC-2M | Vendor Name | HYTOPTODEVICE |
| Connector | SFP28 to SFP28 | Max Data Rate | 25Gbps |
| Cable Length | 2m (7ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius | 21mm | Application | 25G Ethernet, Data Center, 5G Wireless |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 25G SFP28 Passive DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.






Q2: What is the maximum reliable transmission distance of this 25G SFP28 passive dac cable? A: The rated maximum reach for 25G SFP28 passive dac cable is 5 meters. This 2m variant stays comfortably inside the copper signal loss budget for Juniper same-rack deployments.
Q3: Can this passive dac cable establish cross-brand links between Juniper QFX switches and Dell or H3C servers? A: Cross-brand interconnection works reliably with unified 25GBASE-CR and matching FEC configuration. This passive dac cable follows MSA standards for mixed-vendor EVPN fabrics.
Q4: What differentiates SFP28 form factor from older SFP+ for passive dac cable? A: SFP28 form factor supports up to 25G signaling while SFP+ caps at 10G. This passive dac cable uses SFP28 housing to fit modern Juniper 25G ports.
Q5: What signal issues will occur if deploying this passive dac cable longer than the 5m rated limit? A: 25G twinax copper signal attenuates rapidly beyond the limit. Length exceeding 5m triggers CRC errors and intermittent link flapping; longer connections need fiber optics.
Q6: Which workloads get the biggest latency benefit from this passive dac cable in Juniper fabrics? A: NVMe-oF storage, virtualization and HPC clusters gain the most value. This HYTOPTODEVICE passive dac cable delivers consistent low latency for these workloads.
Q7: Can this 2m passive dac cable be deployed for direct server-to-server point-to-point connections? A: Direct server interconnection is fully supported after correct port configuration. This passive dac cable works well for storage replication and cluster sync within a single rack.
Q8: How does AWG wire gauge affect signal performance of 2m passive dac cable? A: 30AWG offers flexible routing for 2m runs, and 26AWG keeps better loss margin near 5m. This cable uses 30AWG twinax optimized for Juniper rack cabling layout.
Q9: Will Junos OS firmware upgrades disrupt the detection of this passive dac cable? A: MSA-compliant passive dac cable stays compatible through regular Junos firmware updates. The preloaded Juniper EEPROM profile maintains stable recognition on mainstream releases.
Q10: When should AOC fiber replace passive dac cable in Juniper data center planning? A: Select active optical cables for cross-rack links or distances above 5 meters. Passive dac cable is zero-power and low-cost for short intra-rack 25G connections.
Q11: How much latency reduction can passive dac cable deliver compared with optical transceiver links? A: Passive dac cable cuts roughly 30–60ns latency by removing optical-electrical conversion. This advantage benefits latency-critical storage and computing.
Q12: Can this SFP28 passive dac cable negotiate 25G rate on legacy SFP+ 10G ports of Juniper devices? A: 25G negotiation cannot happen on SFP+ ports due to different electrical specs. Both ports must be native SFP28 to run this passive dac cable at full 25G.
Q13: Can QSFP28 breakout 4×25G DAC substitute this SFP28 passive dac cable on Juniper SFP28 ports? A: Breakout DAC uses unique pin mapping and split logic. It cannot replace this standard point-to-point SFP28 passive dac cable.
Q14: What compatibility validation tests does HYTOPTODEVICE perform for this Juniper passive dac cable before shipment? A: Each batch completes BER scanning, link bring-up and hot-swap validation on Juniper QFX and EX platforms. Testing confirms EEPROM detection and steady 25G performance.
Q15: What deployment boundaries should buyers understand before bulk purchasing passive dac cable for Juniper fabrics? A: Passive dac cable is built only for short intra-rack copper links. It is not suitable for inter-row or long-distance cross-building transmission.
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




