• Juniper EX-SFP-GE80KCW1610 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1610nm 80km Bulk Factory Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1610nm 80km CWDM SFP transceiver module
  • 80km long reach 1610nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1610nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers
  • Juniper EX-SFP-GE80KCW1610 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1610nm 80km Bulk Factory Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1610nm 80km CWDM SFP transceiver module
  • 80km long reach 1610nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1610nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Juniper EX-SFP-GE80KCW1610 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1610nm 80km Bulk Factory Wholesale | HYTOPTODEVICE

Factory direct Juniper EX-SFP-GE80KCW1610 compatible 1.25G CWDM SFP module. 1000BASE-CWDM 1610nm ultra-stable wavelength, 80km long-range transmission over OS2 single-mode fiber. Pre-flashed zero-alarm firmware for Juniper devices. Support DDM monitoring. Bulk factory wholesale for ISP CWDM ring and enterprise long-distance links. .Private label, custom EEPROM Programming and OEM available.
NO. Brand  Compatible P/N Remarks
1 Juniper EX-SFP-GE80KCW1470
2 Juniper EX-SFP-GE80KCW1490
3 Juniper EX-SFP-GE80KCW1510
4 Juniper EX-SFP-GE80KCW1530
5 Juniper EX-SFP-GE80KCW1550
6 Juniper EX-SFP-GE80KCW1570
7 Juniper EX-SFP-GE80KCW1590
8 Juniper EX-SFP-GE80KCW1610
Description

Juniper EX-SFP-GE80KCW1610 Compatible 1.25G CWDM SFP Module | 1000BASE‑CWDM 1610nm 80km SMF Bulk Wholesale

Product Overview
This 1.25G 1610nm CWDM SFP is a direct replacement for Juniper EX-SFP-GE80KCW1610. It follows 1000BASE-CWDM MSA standards. It delivers stable 80km gigabit transmission on standard OS2 single-mode fiber.
The 1610nm wavelength sits in the low-loss CWDM band. It features low fiber attenuation and minimal channel crosstalk. It works perfectly for multi-wavelength CWDM multiplexing and long-haul trunk links.
All modules adopt customized Juniper EEPROM firmware. No alarms or port lockdowns occur on official Juniper devices. It supports hot-swap and full SFF-8472 DDM monitoring. Every unit passes strict aging and temperature tests for stable bulk deployment.

Key Technical Specifications
 
Juniper Compatible EX-SFP-GE80KCW1610 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1610nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type PIN
TX Power 0~+4dBm Receiver Sensitivity < -28.0dBm
Power Consumption ≤1W Receiver Overload -1.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)
For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 80km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -3 dBm, add an inline optical attenuator (5–10 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 24 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 80km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
  • Juniper EX Series Ethernet Switches (EX2200, EX3300, EX4200, EX4300)
  • Juniper QFX Series Data Center Switches with gigabit SFP ports
  • Juniper MX Series Universal Routers & Service Gateways
  • Juniper SRX Series Security Firewalls with SFP interfaces
  • All Juniper hardware supporting original EX‑SFP‑GE80KCW1610 transceivers

2. Multi-Brand Cross Compatibility

Beyond dedicated Juniper compatibility, this 1610nm long-reach CWDM module adheres to universal MSA industry standards, delivering excellent adaptability with global mainstream network brands including Cisco, H3C, Ruijie, ZTE and TP-Link. 

3.Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility

  • Pre-bulk sample testing for project validation

  • Private label customization and deployment guides

  • Strict batch quality control

  • EEPROM configuration for legacy network environments

  • Free EEPROM recoding plus 24/7 technical support


Primary Application Scenarios

  • 80km point‑to‑point gigabit interconnection for campus and enterprise long‑haul trunk links
  • 1610nm channel CWDM ring network construction and existing fiber‑resource expansion
  • Long‑distance trunk transmission for Juniper EX/MX core network equipment
  • ISP access‑network upgrades and remote‑site broadband extension projects
  • Legacy network renovation, improving fiber utilization through CWDM multiplexing

Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

2. 1G CWDM Direct Connection with Mux/Demux

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

This 1610nm CWDM SFP uses low-power DFB chips. It supports stable 80km transmission with minimal power draw. Compatible with single and dual-fiber CWDM networking. It cuts fiber and power hardware costs, ideal for budget-friendly enterprise and ISP long-haul networking.

Error-free Juniper compatible 1610nm 80km CWDM SFP industrial stability


2.
Verified Host Interoperability for  Devices

Custom Juniper-specific firmware matches original device signatures. It causes no system alarms, port errors or function limits. True plug-and-play deployment, no manual configuration needed for all compatible Juniper hardware.Specific Compatibility Video available upon request.
DDM real-time monitoring 1.25G CWDM transceiver for long-haul fiber links

3.Rigorous Testing, Uncompromising Reliability

Every CWDM transceiver undergoes multi-stage strict testing including optical calibration, aging and temperature cycling. Built-in DDM monitoring supports real-time operating data viewing, ensuring long-term stable operation in complex metro networking environments and lowering field failure rates.
Curious how? Tour the Test Center.

Cost-effective bulk CWDM SFP 80km for ISP and system integrators

FAQ

Q1: What exclusive advantages does 1610nm have for CWDM networking?
A: 1610nm is the top-end final channel of standard CWDM wavelengths. It has no adjacent wavelength interference and ultra-low crosstalk. Its long-wave anti-fading performance is better than mid-band channels. It is the best choice for full-band network completion and core service bearing.

Q2: Is an attenuator required for short-distance testing of this 80km module?
A: Yes. This module features 0~+4.0dBm high transmit power. Direct use on links under 5km leads to optical overload. It causes signal distortion or permanent receiver burnout. A 10–15dB attenuator is mandatory for short-link debugging.

Q3: What link budget does this 1610nm 80km SFP support?
A: It provides 24–26dB stable link budget. It fully covers fiber attenuation, splicing loss and CWDM device insertion loss. It maintains stable transmission even in full-band multi-channel multiplexing scenarios.

Q4: Can OS1 fiber support 80km transmission for 1610nm modules?
A: No. OS1 fiber has high inherent attenuation and poor long-wave adaptability. It cannot meet 80km ultra-long transmission standards. Only qualified OS2 low-loss single-mode fiber ensures full-distance stable links.

Q5: Why is 1610nm the preferred channel for full-band CWDM upgrade?
A: 1610nm is the last missing standard CWDM wavelength. It completes the 1470–1610nm full-spectrum coverage. It has zero crosstalk with existing channels and will not affect original network services. It realizes zero-risk network capacity expansion.

Q6: What value does DDM monitoring bring to long-haul links?
A: DDM real-time monitoring remotely checks module operating status. It tracks optical power fluctuation and temperature changes in real time. It predicts fiber aging and module failure in advance. It reduces manual inspection and lowers network outage risks.

Q7: Can this 1.25G 1610nm module work on 10G SFP+ ports?
A: Yes. 10G SFP+ ports support full downward compatibility with 1.25G SFP modules. The module auto-negotiates to gigabit speed. No manual configuration is needed, and the link runs stably without errors.

Q8: What benefits does hot-swap function provide for network maintenance?
A: Standard hot-swap design supports live insertion and removal. It does not power down devices or interrupt online services. It supports fast faulty module replacement and zero-downtime network maintenance.

Q9: Why do generic modules trigger Juniper system alarms?
A: Generic modules have incomplete EEPROM vendor data and mismatched system signatures. Juniper devices will identify them as unsupported hardware. Our modules adopt matched official firmware to achieve zero-alarm plug-and-play recognition.

Q10: What working environment fits this commercial-grade module?
A: It adapts to standard indoor equipment rooms with 0°C to 70°C temperature range. It passes strict temperature cycling and high-temperature aging tests. It supports 24/7 uninterrupted stable operation of enterprise and operator networks.

Q11: Why outdoor sites need industrial-grade 1610nm CWDM modules?
A: Outdoor environments have extreme temperature changes beyond commercial grade limits. Ordinary modules suffer performance degradation or link dropout in harsh conditions. Industrial-grade modules (-40°C~85°C) ensure stable outdoor long-distance transmission.

Q12: How does high temperature affect 1610nm top-end CWDM modules?
A: 1610nm long-wave lasers are sensitive to overheating. High temperature causes wavelength drift and reduced transmit power. It leads to insufficient link margin and intermittent disconnection. DDM real-time temperature monitoring effectively avoids overheating failures.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • Juniper EX-SFP-GE80KCW1610 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1610nm 80km Bulk Factory Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1610nm 80km CWDM SFP transceiver module
  • 80km long reach 1610nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1610nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Download