• Juniper EX-SFP-GE80KCW1590 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1590nm 80km Bulk Factory Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1590nm 80km CWDM SFP transceiver module
  • 80km long reach 1590nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1590nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers
  • Juniper EX-SFP-GE80KCW1590 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1590nm 80km Bulk Factory Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1590nm 80km CWDM SFP transceiver module
  • 80km long reach 1590nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1590nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Juniper EX-SFP-GE80KCW1590 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1590nm 80km Bulk Factory Wholesale | HYTOPTODEVICE

Factory direct Juniper EX-SFP-GE80KCW1590 compatible 1.25G CWDM SFP module. 1000BASE-CWDM 1590nm ultra-stable wavelength, 80km long-range transmission over OS2 single-mode fiber. Pre-flashed zero-alarm firmware for Juniper devices. Support DDM monitoring. Bulk factory wholesale for ISP CWDM ring and enterprise long-distance links. .Private label, custom EEPROM Programming and OEM available.
NO. Brand  Compatible P/N Remarks
1 Juniper EX-SFP-GE80KCW1470
2 Juniper EX-SFP-GE80KCW1490
3 Juniper EX-SFP-GE80KCW1510
4 Juniper EX-SFP-GE80KCW1530
5 Juniper EX-SFP-GE80KCW1550
6 Juniper EX-SFP-GE80KCW1570
7 Juniper EX-SFP-GE80KCW1590
8 Juniper EX-SFP-GE80KCW1610
Description

Juniper EX-SFP-GE80KCW1590 Compatible 1.25G CWDM SFP Module | 1000BASE‑CWDM 1590nm 80km SMF Bulk Wholesale

Product Overview
This 1.25G 1590nm CWDM SFP is a direct replacement for Juniper EX-SFP-GE80KCW1590. It follows 1000BASE-CWDM MSA standards. It delivers stable 80km gigabit transmission on standard OS2 single-mode fiber.
The 1590nm wavelength sits in the low-loss CWDM band. It features low fiber attenuation and minimal channel crosstalk. It works perfectly for multi-wavelength CWDM multiplexing and long-haul trunk links.
All modules adopt customized Juniper EEPROM firmware. No alarms or port lockdowns occur on official Juniper devices. It supports hot-swap and full SFF-8472 DDM monitoring. Every unit passes strict aging and temperature tests for stable bulk deployment.

Key Technical Specifications
 
Juniper Compatible EX-SFP-GE80KCW1590 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1590nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type PIN
TX Power 0~+4dBm Receiver Sensitivity < -28.0dBm
Power Consumption ≤1W Receiver Overload -1.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)
For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 80km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -3 dBm, add an inline optical attenuator (5–10 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 24 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 80km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
  • Juniper EX Series Ethernet Switches (EX2200, EX3300, EX4200, EX4300)
  • Juniper QFX Series Data Center Switches with gigabit SFP ports
  • Juniper MX Series Universal Routers & Service Gateways
  • Juniper SRX Series Security Firewalls with SFP interfaces
  • All Juniper hardware supporting original EX‑SFP‑GE80KCW1590 transceivers

2. Multi-Brand Cross Compatibility

Beyond dedicated Juniper compatibility, this 1590nm long-reach CWDM module adheres to universal MSA industry standards, delivering excellent adaptability with global mainstream network brands including Cisco, H3C, Ruijie, ZTE and TP-Link. 

3.Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility

  • Pre-bulk sample testing for project validation

  • Private label customization and deployment guides

  • Strict batch quality control

  • EEPROM configuration for legacy network environments

  • Free EEPROM recoding plus 24/7 technical support


Primary Application Scenarios

  • 80km point‑to‑point gigabit interconnection for campus and enterprise long‑haul trunk links
  • 1590nm channel CWDM ring network construction and existing fiber‑resource expansion
  • Long‑distance trunk transmission for Juniper EX/MX core network equipment
  • ISP access‑network upgrades and remote‑site broadband extension projects
  • Legacy network renovation, improving fiber utilization through CWDM multiplexing

Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

2. 1G CWDM Direct Connection with Mux/Demux

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

This 1590nm CWDM SFP uses low-power DFB chips. It supports stable 80km transmission with minimal power draw. Compatible with single and dual-fiber CWDM networking. It cuts fiber and power hardware costs, ideal for budget-friendly enterprise and ISP long-haul networking.

Error-free Juniper compatible 1590nm 80km CWDM SFP industrial stability


2.
Verified Host Interoperability for Devices

Custom Juniper-specific firmware matches original device signatures. It causes no system alarms, port errors or function limits. True plug-and-play deployment, no manual configuration needed for all compatible Juniper hardware.Specific Compatibility Video available upon request.
DDM real-time monitoring 1.25G CWDM transceiver for long-haul fiber links

3.Rigorous Testing, Uncompromising Reliability

Every CWDM transceiver undergoes multi-stage strict testing including optical calibration, aging and temperature cycling. Built-in DDM monitoring supports real-time operating data viewing, ensuring long-term stable operation in complex metro networking environments and lowering field failure rates.
Curious how? Tour the Test Center.

Cost-effective bulk CWDM SFP 80km for ISP and system integrators


FAQ

Q1: What are the unique strengths of 1590nm CWDM for 80km long-haul networking?
A: 1590nm is a high-quality end-band CWDM wavelength. It has ultra-low fiber dispersion and signal fading. It produces almost no crosstalk with other CWDM channels. It delivers more stable long-distance transmission than mid-band wavelengths, perfect for 80km trunk links.

Q2: Is an optical attenuator required for short-distance testing of this 80km module?
A: Yes. This module features 0~+4.0dBm high transmit power. Direct use on links under 5km causes optical power overload. It leads to signal distortion or permanent receiver damage. A 10–15dB attenuator is mandatory for lab and short-link debugging.

Q3: What link budget can this 1590nm 80km SFP provide?
A: It provides 24–26dB sufficient link budget. It easily covers fiber attenuation, splicing loss and CWDM device insertion loss. It maintains stable full-distance operation in complex full-band multiplexing scenarios.

Q4: Can OS1 fiber support 80km transmission for 1590nm long-wave modules?
A: No. OS1 fiber has high inherent attenuation and poor anti-fading ability. It cannot support 80km ultra-long transmission. Only standard OS2 low-loss single-mode fiber ensures stable full-distance link performance.

Q5: Why choose 1590nm for full-band CWDM network expansion?
A: 1590nm fills the end-band gap of standard CWDM wavelength groups. It does not conflict or interfere with existing mid and short-wave channels. It is the optimal supplementary channel for upgrading and expanding full-band metro ring networks.

Q6: How does DDM monitoring improve long-term network stability?
A: DDM real-time monitoring remotely checks module optical power, temperature and voltage. It captures fiber aging and performance degradation in advance. It realizes proactive maintenance, reduces on-site inspection and lowers link failure rates.

Q7: Can this 1.25G 1590nm CWDM module work on 10G SFP+ ports?
A: Yes. 10G SFP+ ports support full downward compatibility with 1.25G SFP modules. The module auto-negotiates to gigabit speed. No configuration is needed, and the link runs stably without speed mismatch errors.

Q8: What maintenance benefits does hot-swap function offer?
A: Standard hot-swap design supports live insertion and removal. It does not shut down devices or interrupt running services. It supports fast faulty module replacement and zero-downtime network maintenance.

Q9: Why generic CWDM modules trigger Juniper system alarms?
A: Generic modules have incomplete EEPROM vendor data and mismatched signatures. Juniper systems will identify them as unsupported devices. Our modules use official-matched firmware to pass system verification and achieve zero-alarm plug-and-play.

Q10: What environment is suitable for this commercial-grade CWDM module?
A: It is designed for standard indoor equipment rooms with 0°C to 70°C temperature range. It passes strict temperature cycling and aging tests. It supports 24/7 uninterrupted stable operation of enterprise and operator networks.

Q11: Why outdoor field sites need industrial-grade CWDM modules?
A: Outdoor environments have extreme temperature fluctuations beyond 0–70°C. Commercial modules will have performance degradation or link dropout. Industrial-grade modules (-40°C~85°C) adapt to harsh outdoor conditions and ensure stable transmission.

Q12: How does overheating affect 1590nm long-wave module performance?
A: Overheating causes laser wavelength drift and reduced transmit power. Long-wave modules are more sensitive to high temperature changes. It leads to increased signal fading and insufficient link margin. DDM temperature monitoring can effectively avoid overheating failures.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging
Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • Juniper EX-SFP-GE80KCW1590 Compatible 1.25G CWDM SFP Module | 1000BASE-CWDM 1590nm 80km Bulk Factory Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1590nm 80km CWDM SFP transceiver module
  • 80km long reach 1590nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1590nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Download