• Juniper EX-SFP-GE80KCW1550 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1550nm 80km Bulk & Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1550nm 80km CWDM SFP transceiver module
  • 80km long reach 1550nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1550nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers
  • Juniper EX-SFP-GE80KCW1550 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1550nm 80km Bulk & Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1550nm 80km CWDM SFP transceiver module
  • 80km long reach 1550nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1550nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Juniper EX-SFP-GE80KCW1550 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1550nm 80km Bulk & Wholesale | HYTOPTODEVICE

Factory-grade Juniper EX‑SFP‑GE80KCW1550 compatible 1.25G CWDM SFP transceiver, featuring industry-leading 1550nm ultra-low-loss wavelength and 80km long-haul transmission over OS2 single-mode fiber. Pre-programmed for full Juniper EX/MX/QFX/SRX zero-alarm operation with DDM DOM monitoring. Bulk & wholesale supply for ISP metro rings, rural trunk links and enterprise long-distance networking projects.Private label, custom EEPROM Programming and OEM available.
NO. Brand  Compatible P/N Remarks
1 Juniper EX-SFP-GE80KCW1470
2 Juniper EX-SFP-GE80KCW1490
3 Juniper EX-SFP-GE80KCW1510
4 Juniper EX-SFP-GE80KCW1530
5 Juniper EX-SFP-GE80KCW1550
6 Juniper EX-SFP-GE80KCW1570
7 Juniper EX-SFP-GE80KCW1590
8 Juniper EX-SFP-GE80KCW1610
Description

Juniper EX-SFP-GE80KCW1550 Compatible 1.25G CWDM SFP Transceiver | 1000BASE‑CWDM 1550nm 80km SMF Bulk Wholesale

Product Overview

This 1.25G 1550nm CWDM SFP is a drop‑in replacement for Juniper EX‑SFP‑GE80KCW1550. It complies with 1000BASE‑CWDM standards and delivers stable gigabit connectivity up to 80km across OS2 single‑mode fiber. The 1550nm channel fits standard CWDM wavelength grid, perfect for multi‑wavelength multiplexing metro‑ring deployments.
Each HYTOPTODEVICE module comes pre‑programmed with Juniper‑matched EEPROM data. It avoids transceiver‑not‑supported alerts and port lockdowns. Hot‑swap supported with full DDM capability, no complex manual configuration required. Every unit goes through temperature cycling and burn‑in testing for dependable commercial and carrier‑grade bulk deployment. support sample test, bulk wholesale, private label and custom EEPROM Programming for global importers,distributors and system integrators.

Key Technical Specifications
 
Juniper Compatible EX-SFP-GE80KCW1550 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1550nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type PIN
TX Power 0~+4dBm Receiver Sensitivity < -28.0dBm
Power Consumption ≤1W Receiver Overload -1.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)
For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 80km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -3 dBm, add an inline optical attenuator (5–10 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 24 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 80km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
  • Juniper EX Series Ethernet Switches (EX2200, EX3300, EX4200, EX4300)
  • Juniper QFX Series Data Center Switches with gigabit SFP ports
  • Juniper MX Series Universal Routers & Service Gateways
  • Juniper SRX Series Security Firewalls with SFP interfaces
  • All Juniper hardware supporting original EX‑SFP‑GE80KCW1550 transceivers

2. Multi-Brand Cross Compatibility

Beyond dedicated Juniper compatibility, this 1550nm long-reach CWDM transceiver adheres to universal MSA industry standards, delivering excellent adaptability with global mainstream network brands including Cisco, H3C, Ruijie, ZTE and TP-Link. 

3.Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility

  • Pre-bulk sample testing for project validation

  • Private label customization and deployment guides

  • Strict batch quality control

  • EEPROM configuration for legacy network environments

  • Free EEPROM recoding plus 24/7 technical support


Primary Application Scenarios

  • 80km point‑to‑point gigabit interconnection for campus and enterprise long‑haul trunk links
  • 1550nm channel CWDM ring network construction and existing fiber‑resource expansion
  • Long‑distance trunk transmission for Juniper EX/MX core network equipment
  • ISP access‑network upgrades and remote‑site broadband extension projects
  • Legacy network renovation, improving fiber utilization through CWDM multiplexing

Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

2. 1G CWDM Direct Connection with Mux/Demux

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

This 1550nm CWDM SFP uses low-power DFB chips. It supports stable 80km transmission with minimal power draw. Compatible with single and dual-fiber CWDM networking. It cuts fiber and power hardware costs, ideal for budget-friendly enterprise and ISP long-haul networking.

Error-free Juniper compatible 1550nm 80km CWDM SFP industrial stability


2.
Verified Host Interoperability for  Devices

Custom Juniper-specific firmware matches original device signatures. It causes no system alarms, port errors or function limits. True plug-and-play deployment, no manual configuration needed for all compatible Juniper hardware. Specific Compatibility Video available upon request.

DDM real-time monitoring 1.25G CWDM transceiver for long-haul fiber links

3.Rigorous Testing, Uncompromising Reliability

Every CWDM transceiver undergoes multi-stage strict testing including optical calibration, aging and temperature cycling. Built-in DDM monitoring supports real-time operating data viewing, ensuring long-term stable operation in complex metro networking environments and lowering field failure rates.
Curious how? Tour the Test Center.

Cost-effective bulk CWDM SFP 80km for ISP and system integrators


FAQ

Q1: Why is 1550nm the most reliable wavelength for 80km CWDM long-haul networking?
A: The 1550nm band is the optimal low-loss window for optical fiber transmission, with attenuation as low as ~0.19dB/km, far lower than 1270–1350nm short wavelengths. It provides maximum link power margin for 80km ultra-long transmission, effectively resisting fiber aging and environmental interference, and is the most stable choice for carrier-grade long-distance CWDM links.

Q2: Does high TX power 80km CWDM module cause receiver damage in short-distance testing?
A: Yes. This 80km 1550nm CWDM SFP features high transmit power (0~+4.0dBm). Direct connection on fiber links shorter than 5km will cause optical power overload, resulting in receiver saturation, signal distortion or permanent component burnout. A 10–15dB fixed optical attenuator must be added for short-link debugging and laboratory testing.

Q3: What link budget margin can this 1550nm 80km CWDM module provide for complex networking?
A: This Juniper-compatible module provides 24–27dB ultra-high available link budget. The abundant margin can easily cover fiber attenuation, connector loss, splicing loss and CWDM MUX/DEMUX insertion loss, ensuring stable full-distance operation even in multi-channel multiplexing complex network environments.

Q4: Can OS1 single-mode fiber support stable 80km transmission for 1550nm CWDM modules?
A: No. OS1 fiber has higher inherent attenuation and cannot support 80km ultra-long transmission requirements. Only OS2 low-loss single-mode fiber can match the transmission performance of 1550nm long-reach CWDM modules, avoiding packet loss, link flickering and intermittent disconnection caused by excessive signal loss.

Q5: What unique advantages does 1550nm have in CWDM ring network multiplexing?
A: The 1550nm wavelength has extremely low crosstalk interference during multi-wavelength multiplexing and excellent spectral stability. It will not generate signal mutual interference with other CWDM channels. It is the preferred channel for core service bearing in metro CWDM ring networks, ensuring high stability of key business data transmission.

Q6: How does DDM monitoring optimize long-term O&M of 80km CWDM trunk links?
A: This 1550nm CWDM SFP supports full real-time DDM/DOM monitoring. Network administrators can remotely view optical power, temperature and voltage data without on-site inspection. It realizes early warning of fiber aging and module performance degradation, transforming passive maintenance into proactive prediction and greatly reducing link failure downtime.

Q7: Can 1.25G 1550nm CWDM SFP work normally on 10G SFP+ ports?
A: Fully compatible. 10G SFP+ ports support downward adaptation to 1.25G SFP gigabit modules. This transceiver automatically negotiates 1000BASE-CWDM rate without manual configuration. It runs stably on all SFP+ port devices with zero speed mismatch and zero link down errors.

Q8: What operational benefits does hot-swap function bring to network maintenance?
A: Standard hot-swap design supports online insertion and removal without shutting down network devices. During daily maintenance and module replacement, it does not interrupt existing business services, realizing fast fault recovery and zero service downtime for live network maintenance.

Q9: How to completely solve Juniper switch third-party transceiver alarm issues?
A: Most generic modules trigger alarms due to mismatched vendor codes and incomplete EEPROM data. Our EX-SFP-GE80KCW1550 compatible modules are pre-flashed with official-matched Juniper firmware and complete device signatures. It passes system full verification, eliminates all unsupported transceiver alarms, and achieves true plug-and-play deployment.

Q10: What temperature environment is suitable for long-term operation of this CWDM module?
A: This commercial-grade 1550nm CWDM SFP is designed for 0°C to 70°C indoor equipment room environments. All products pass strict temperature cycling and high-temperature aging tests, maintaining stable laser output and optical sensitivity to ensure 24/7 uninterrupted stable operation of enterprise and operator networks.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • Juniper EX-SFP-GE80KCW1550 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1550nm 80km Bulk & Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1550nm 80km CWDM SFP transceiver module
  • 80km long reach 1550nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1550nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Download