• Juniper EX-SFP-GE80KCW1530 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1530nm 80km Bulk Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1530nm 80km CWDM SFP transceiver module
  • 80km long reach 1530nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1530nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers
  • Juniper EX-SFP-GE80KCW1530 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1530nm 80km Bulk Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1530nm 80km CWDM SFP transceiver module
  • 80km long reach 1530nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1530nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Juniper EX-SFP-GE80KCW1530 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1530nm 80km Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE Juniper EX‑SFP‑GE80KCW1530 compatible 1.25G CWDM SFP transceiver, 1530nm CWDM wavelength, 80km over OS2 single‑mode fiber. Pre‑coded for Juniper EX, MX, QFX hardware, alarm‑free plug‑and‑play with DDM support. Factory bulk supply for metro CWDM rings and long‑haul gigabit trunk links. Private label, custom EEPROMING Programming and OEM available.
NO. Brand  Compatible P/N Remarks
1 Juniper EX-SFP-GE80KCW1470
2 Juniper EX-SFP-GE80KCW1490
3 Juniper EX-SFP-GE80KCW1510
4 Juniper EX-SFP-GE80KCW1530
5 Juniper EX-SFP-GE80KCW1550
6 Juniper EX-SFP-GE80KCW1570
7 Juniper EX-SFP-GE80KCW1590
8 Juniper EX-SFP-GE80KCW1610
Description

Juniper EX-SFP-GE80KCW1530 Compatible 1.25G CWDM SFP Transceiver | 1000BASE‑CWDM 1530nm 80km SMF Bulk Wholesale

Product Overview

This 1.25G 1530nm CWDM SFP is a drop‑in replacement for Juniper EX‑SFP‑GE80KCW1530. It complies with 1000BASE‑CWDM standards and delivers stable gigabit connectivity up to 80km across OS2 single‑mode fiber. The 1530nm channel fits standard CWDM wavelength grid, perfect for multi‑wavelength multiplexing metro‑ring deployments.
Each HYTOPTODEVICE module comes pre‑programmed with Juniper‑matched EEPROM data. It avoids transceiver‑not‑supported alerts and port lockdowns. Hot‑swap supported with full DDM capability, no complex manual configuration required. Every unit goes through temperature cycling and burn‑in testing for dependable commercial and carrier‑grade bulk deployment. support sample test, bulk wholesale, private label and custom EEPROM Programming for global importers,distributors and system integrators.

Key Technical Specifications
 
Juniper Compatible EX-SFP-GE80KCW1530 Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 1.25Gbps
Wavelength 1530nm Max  Distance 80KM
Connector Duplex LC Transmitter Type DFB CWDM
Cable Type SMF Receiver Type PIN
TX Power 0~+4dBm Receiver Sensitivity < -28.0dBm
Power Consumption ≤1W Receiver Overload -1.0dBm
Protocols IEEE 802.3z, SFF‑8472, SFP MSA, RoHS‑6, Class 1 Laser Operation Temperature 0 to 70°C (32 to 158°F)
For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Fiber Matching: Use OS2 9/125μm single-mode fiber (up to 80km). Use standard LC-UPC connectors only; LC-APC connectors are strictly prohibited.

  • Optical Attenuation (Crucial): Never direct-connect short links (<20km). If received power exceeds -3 dBm, add an inline optical attenuator (5–10 dB) at the Rx port to prevent receiver burnout.

  • Connection & Rx/Tx Check: Ensure correct Tx/Rx fiber pairing. Keep LC connector end-faces clean to avoid extra insertion loss and bit errors.

  • Link Budget: Account for total optical loss (splices, adapters, fiber distance) before deployment to stay within the 24 dB link budget.

  • Thermal Management: Operating temp: 0°C to 70°C. Avoid dense stacking of high-power 80km SFPs to prevent overheating.

  • Hot-Swapping: Supports hot-plugging. Gently insert/pull using the bail latch to protect port pins.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
  • Juniper EX Series Ethernet Switches (EX2200, EX3300, EX4200, EX4300)
  • Juniper QFX Series Data Center Switches with gigabit SFP ports
  • Juniper MX Series Universal Routers & Service Gateways
  • Juniper SRX Series Security Firewalls with SFP interfaces
  • All Juniper hardware supporting original EX‑SFP‑GE80KCW1530 transceivers

2. Multi-Brand Cross Compatibility

Beyond dedicated Juniper compatibility, this 1530nm long-reach CWDM transceiver adheres to universal MSA industry standards, delivering excellent adaptability with global mainstream network brands including Cisco, H3C, Ruijie, ZTE and TP-Link.

3.Value-Added Services

  • Custom EEPROM programming for multi-platform compatibility

  • Pre-bulk sample testing for project validation

  • Private label customization and deployment guides

  • Strict batch quality control

  • EEPROM configuration for legacy network environments

  • Free EEPROM recoding plus 24/7 technical support


Primary Application Scenarios

  • 80km point‑to‑point gigabit interconnection for campus and enterprise long‑haul trunk links
  • 1530nm channel CWDM ring network construction and existing fiber‑resource expansion
  • Long‑distance trunk transmission for Juniper EX/MX core network equipment
  • ISP access‑network upgrades and remote‑site broadband extension projects
  • Legacy network renovation, improving fiber utilization through CWDM multiplexing

Connectivity Solutions(Applications)

1.
1G Long-Haul CWDM Direct Connection with Network Switches

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

2. 1G CWDM Direct Connection with Mux/Demux

hytoptodevice CWDM MUX DEMUX fiber aggregation for multi-service metro ring network

The Core Feature

1. Low Power & Cost-Effective Single-Fiber CWDM Solution

This 1530nm CWDM SFP uses low-power DFB chips. It supports stable 80km transmission with minimal power draw. Compatible with single and dual-fiber CWDM networking. It cuts fiber and power hardware costs, ideal for budget-friendly enterprise and ISP long-haul networking.

Error-free Juniper compatible 1530nm 80km CWDM SFP industrial stability


2.
Verified Host Interoperability for Devices

Custom Juniper-specific firmware matches original device signatures. It causes no system alarms, port errors or function limits. True plug-and-play deployment, no manual configuration needed for all compatible Juniper hardware. Curious how? Tour the Test Center.

DDM real-time monitoring 1.25G CWDM transceiver for long-haul fiber links

3.Rigorous Testing, Uncompromising Reliability

Every CWDM transceiver undergoes multi-stage strict testing including optical calibration, aging and temperature cycling. Built-in DDM monitoring supports real-time operating data viewing, ensuring long-term stable operation in complex metro networking environments and lowering field failure rates.
Curious how? Tour the Test Center.

Cost-effective bulk CWDM SFP 80km for ISP and system integrators


FAQ

Q1: What is the actual link budget margin of this 1530nm 80km CWDM SFP?
A: This Juniper-compatible 1530nm CWDM SFP delivers a 24–26dB practical link budget. The sufficient power margin easily offsets fiber attenuation, connector loss, and CWDM multiplexer insertion loss. It guarantees stable full-distance 80km transmission even in complex multi-channel CWDM networking environments.

Q2: Why must optical attenuators be used for short-distance testing of 80km high-power CWDM modules?
A: 80km-class CWDM SFPs feature high transmit power (0~+4.0dBm), receiver overload about -3dBm. Direct connection on short fiber links produces excessive optical power, which causes receiver saturation, signal distortion, or permanent photodiode damage. Installing a 10–15dB attenuator ensures matched optical power and safe, stable short-link testing.

Q3: What makes 1530nm wavelength ideal for long-reach 80km CWDM transmission?
A: The 1530nm band belongs to the low-loss CWDM transmission window with only ~0.20dB/km fiber attenuation, far lower than 1270–1350nm short wavelengths (~0.35dB/km). It minimizes signal decay over ultra-long fiber spans, providing consistent signal integrity and superior stability for 80km metro long-haul links.

Q4: Can OS1 fiber support 80km transmission for 1.25G CWDM modules?
A: No. OS1 single-mode fiber has higher attenuation and cannot meet the low-loss requirements for 80km long-haul transmission. Only standard OS2 9/125μm single-mode fiber supports full 80km stable transmission for this 1530nm CWDM SFP, avoiding link flickering and packet loss caused by excessive signal attenuation.

Q5: What are the engineering advantages of deploying 1470–1610nm CWDM channels?
A: 1470–1610nm long CWDM wavelengths feature ultra-low attenuation and negligible crosstalk during multiplexing. They deliver longer transmission distances, stronger anti-interference capability, and more stable multi-service aggregation. The 1530nm channel perfectly fits this range, optimal for large-scale metro CWDM ring networking.

Q6: What operational benefits does DDM monitoring bring to 80km CWDM trunk links?
A: This 1530nm CWDM SFP supports full SFF-8472 DDM monitoring. It enables real-time remote viewing of optical power, temperature and voltage data. Technicians can proactively detect fiber aging, power attenuation abnormalities and module faults, realizing preventive maintenance and reducing long-haul link outage risks.

Q7: Will using 1.25G CWDM SFP on 10G SFP+ ports cause speed or link issues?
A: No issues at all. 10G SFP+ ports feature full downward compatibility with 1.25G SFP modules. This CWDM transceiver automatically negotiates to 1000BASE-Gigabit speed without manual configuration. It runs stably on all SFP+ port devices with no link down or speed mismatch errors.

Q8: What onsite maintenance conveniences does hot-swap support provide?
A: This 1530nm CWDM SFP complies with standard hot-swap design. It supports online insertion and removal without powering down switches or routers. It allows fast module replacement and fault troubleshooting during live network operation, effectively minimizing business service interruption time.

Q9: How to solve Juniper switch unsupported transceiver alarms completely?
A: Most third-party modules trigger alarms due to mismatched EEPROM vendor data. Our EX-SFP-GE80KCW1530 compatible modules are pre-flashed with authentic Juniper-specific firmware and device signatures. It achieves zero-alarm recognition, no port lockdown, and true plug-and-play without CLI command activation.

Q10: How does commercial-grade temperature tolerance ensure long-term link stability?
A: This module supports 0°C to 70°C continuous commercial operation. All units pass strict high and low temperature cycling and aging tests. It maintains stable laser power and optical sensitivity in standard equipment room environments, avoiding link jitter caused by temperature changes for 24/7 long-term operation.

Q11: Why outdoor network sites require industrial-grade CWDM transceivers?
A: Outdoor cabinets and pole-mounted devices face extreme temperature fluctuations, far exceeding commercial 0–70°C ranges. Standard modules suffer performance degradation or downtime under high/low extreme temperatures. Industrial-grade (-40°C~85°C) modules provide stable laser output and reliable links for outdoor field networking.

Q12: How does overheating damage CWDM 80km long-haul modules?
A: Continuous overheating causes CWDM laser wavelength shift and declining transmit power, which increases fiber attenuation and reduces link margin. In severe cases, it triggers intermittent link dropout or permanent laser burnout. Built-in DDM temperature monitoring can real-time track operating status to prevent overheating failures.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every module is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

HYTOPTODEVICE 10Gbase-bx bidi transceiver  custom packaging

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

  • Juniper EX-SFP-GE80KCW1530 Compatible 1.25G CWDM SFP Transceiver | 1000BASE-CWDM 1530nm 80km Bulk Wholesale | HYTOPTODEVICE
  • Juniper compatible 1.25G 1530nm 80km CWDM SFP transceiver module
  • 80km long reach 1530nm CWDM single-mode SFP for Juniper EX series switches
  • Juniper compatible 1.25G 1000BASE-CWDM 1530nm DDM optical transceiver bulk supply
  • hytoptodevice 1.25G CWDM MUX/DEMUX multi-channel fiber aggregation solution for cwdm transceivers

Download