• HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+
  • HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+

Intel XLDACBL05 Compatible 40G QSFP+ Passive DAC Cable 0.5M | 40GBASE-CR4 Copper Twinax Cable Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE is a trusted factory supplier for bulk orders of 40G QSFP+ passive dac cable. This 0.5M Intel compatible 40G QSFP+ passive dac cable follows 40GBASE-CR4 standard, ideal for short rack links paired with Intel server NICs and Ethernet adapters. Source reliable 40G QSFP+ passive dac cable for server uplinks and data center fabrics.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-H40G-CU50CM
2 Arista Networks  CAB-Q-Q-0.5M
3 Juniper EX-QSFP-40GE-DAC-50CM
4 Brocade 40G-QSFP-C-00501
5 Dell 332-1362 
6 Intel XLDACBL05
7 NVIDIA/Mellanox  MC2206130-00A
Description

Intel XLDACBL05 Compatible 40G QSFP+ Passive DAC Cable 0.5M | 40GBASE-CR4 Copper Twinax Cable Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 0.5M QSFP+ to QSFP+ 40G QSFP+ passive dac cable is a direct drop-in replacement for Intel XLDACBL05. It is designed for 40GBASE Ethernet, compliant with 40GBASE-CR4, SFF-8436 and IEEE 802.3ba standards to deliver stable 40Gbps ultra-short intra-rack connections. This twinax DAC has no active chips, consumes 0W power and supports hot swap. We preload Intel-matched EEPROM signatures to reduce transceiver warning logs on Intel Ethernet adapters. Available for bulk purchase, sample testing and OEM private label service for distributors and system integrators.

Key Technical Specifications

Intel Compatible
 XLDACBL05
Vendor Name HYTOPTODEVICE
Connector QSFP+ to QSFP+ Max Data Rate 40Gbps
Cable Length 0.5m (1.6ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.5W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols SFF-8436, QSFP+ MSA and IEEE 802.3ba
Minimum Bend Radius 35mm Application 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP+ port must enable 40GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Works only with standard QSFP+ 40G ports; cannot be inserted into SFP+ or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Intel Hardware & Firmware

  • Intel XL710, X710, X520 series 40G QSFP+ Ethernet server adapters
  • Intel AXXP3SWX08040, AXXP3SWX08080 PCIe 40G switches
  • Intel M50CYP, R1208WFTYS server platform QSFP+ uplink ports

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 40G QSFP+ passive DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 
  • Ultra-short intra-rack server-to-switch uplinks for Intel NIC deployments
  • 40G fabric interconnection between adjacent servers in compact racks
  • Low-latency distributed storage and NVMe-oF networking
  • Virtualization and hyper-converged infrastructure short connections
  • Direct replacement for original Intel XLDACBL05 QSFP+ to QSFP+ 40G QSFP+ passive dac cable
  • High-density rack internal 40G interconnection for 40GBASE Ethernet deployments

Connectivity Solutions(Applications) 

1. 40G to 40G Direct Link for Switch-Switch
hytoptodevice 40g qsfp+ passive copper cable for switch to switch

The Core Feature

1. Cost-Effective Ultra-Short Connectivity

Using twinax copper, the 40G passive copper cable replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

hytoptodevice QSFP+ to QSFP+ 40g qsfp+ dac cable for data center

2. Ultra-Low Power, Maximum Energy Efficiency

The 40g qsfp+ passive copper twinax cable draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 40G link for short-reach connections — within a rack or across adjacent racks.

QSFP+ form factor 40g qsfp+ dac cable with low power consumption

3.Host-Device Tested for Proven Interoperability

Every 40g passive copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 40G QSFP+ twinax cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  QSFP+ to QSFP+ 40g qsfp+ dac cable for switches

FAQ

Q1: Can this Intel compatible 40G QSFP+ passive dac cable link Intel server adapters to other brand switches? A: Yes, this HYTOPTODEVICE 40G QSFP+ passive dac cable supports cross-vendor interoperation. It is pre-flashed with Intel NIC optimized EEPROM and fully validated to deliver reliable 40GBASE Ethernet connections across mixed-brand setups.

Q2: Why will my Intel XL710 adapter report an unrecognized transceiver alert after installing this DAC? A: This alert triggers when the adapter’s vendor ID verification fails. HYTOPTODEVICE pre-programs Intel-specific EEPROM profile for this 40G QSFP+ passive dac cable to minimize transceiver warning messages during your 40GBASE Ethernet deployment.

Q3: Will MSA-compliant 40G twinax DAC run plug-and-play without extra tuning on white-box open switches? A: No, MSA specifications only define mechanical and electrical parameters. Generic twinax cables often lack valid identification signatures, while HYTOPTODEVICE 40G QSFP+ passive dac cable passes real open-switch validation for stable 40GBASE Ethernet operation.

Q4: What infrastructure layout fits a QSFP+ to 4×SFP+ breakout twinax DAC? A: A breakout DAC splits one 40G QSFP+ port into four separate 10G SFP+ links. This straight HYTOPTODEVICE 40G QSFP+ passive dac cable transmits full 40G bandwidth natively for point-to-point Intel server 40GBASE Ethernet links.

Q5: Do Intel PCIe switches and XL710 adapters require special configuration to work with breakout DAC? A: Yes, breakout mode must be enabled via driver or firmware settings on supported ports. This HYTOPTODEVICE straight 40G QSFP+ passive dac cable needs no breakout configuration and runs native 40GBASE Ethernet out of the box.

Q6: When should I pick a straight 40G DAC rather than breakout DAC for Intel server environments? A: Straight 40G DAC creates one full 40G connection between two QSFP+ ports; breakout DAC divides bandwidth for multiple 10G downlinks. Our 40G QSFP+ passive dac cable is built for native Intel 40GBASE Ethernet point-to-point interconnection.

Q7: What is the maximum reliable reach you can get with passive 40G QSFP+ twinax copper? A: The reliable upper limit for passive 40G QSFP+ twinax is 5–7 meters. This 0.5m HYTOPTODEVICE 40G QSFP+ passive dac cable is ideal for ultra-short rack internal 40GBASE Ethernet with minimal signal attenuation.

Q8: How do different AWG ratings change signal loss for 40G twinax DAC on Intel server racks? A: Thicker wires (lower AWG numbers like 24AWG) experience lower signal attenuation over longer runs (5m–7m), whereas thinner wires (30AWG) are better suited for short, flexible runs (0.5m–2m). This 30AWG HYTOPTODEVICE 40G QSFP+ passive dac cable balances flexible routing and steady signal integrity for short 40GBASE Ethernet links.

Q9: Which AWG grade works best for dense cable management with 40G QSFP+ DAC assemblies? A: Yes. 24AWG cables are thick, heavy, and rigid. They require careful bend radius management to prevent putting excessive mechanical strain on switch port cages. 30AWG twinax offers superior flexibility for dense layouts. This HYTOPTODEVICE 0.5-2m 40G QSFP+ passive dac cable uses 30AWG, making routing easier on high-density Intel server patch panels and cable arms for 40GBASE Ethernet.

Q10: Is it acceptable to route passive 40G QSFP+ DAC outside the server cabinet or run it through wall conduits? A: No, passive twinax DAC is designed exclusively for indoor cabinet deployment. It has no outdoor-rated jacket protection, so this 40G QSFP+ passive dac cable must stay inside data racks for 40GBASE Ethernet.

Q11: What cable option should I choose if the required link length exceeds 7 meters? A: Active Optical Cable (AOC) is the proper upgrade for links longer than 7m. This HYTOPTODEVICE 40G QSFP+ passive dac cable provides a zero-power, cost-effective solution for short rack-local 40GBASE Ethernet connections.

Q12: How does total deployment cost compare between 40G twinax DAC and QSFP+ transceivers paired with MTP fiber? A: Passive twinax DAC greatly cuts total hardware cost by removing optical module expenses. This HYTOPTODEVICE 40G QSFP+ passive dac cable reduces investment for short Intel server 40GBASE Ethernet fabric interconnections.

Q13: Will nearby power supply cables trigger EMI interference for this 40G QSFP+ passive dac cable? A: Shielded twinax suppresses EMI but remains more sensitive than fiber media. HYTOPTODEVICE uses premium shielding on this 40G QSFP+ passive dac cable to sustain stable 40GBASE Ethernet performance beside power cabling in Intel server racks.

Q14: Can a simple adapter make a 40G QSFP+ DAC compatible with a regular 10G SFP+ port? A: No, QSFP+ and SFP+ have different pin assignments and lane grouping structures. This 40G QSFP+ passive dac cable only functions between two native QSFP+ ports to establish valid 40GBASE Ethernet.

Q15: Can this Intel compatible 40G QSFP+ DAC directly connect two Intel servers equipped with QSFP+ NICs? A: Yes, this works if both servers have native QSFP+ Ethernet adapters. This HYTOPTODEVICE 40G QSFP+ passive dac cable builds low-latency 40GBASE Ethernet links between Intel server NICs.


Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE 40G QSFP+ PASSIVE COPPER CABLE FOR DATA CENTER
  • hytoptodevice supply 40g qsfp+ dac cable passive copper twinax
  • 40g dac cable passive copper twinax DAC from hytoptodevice
  • Passive copper twinax cable 40g qsfp+

Download