• HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • IBM 	BN-QS-SP-CBL-50CM Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • IBM 	BN-QS-SP-CBL-50CM Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

IBM BN-QS-SP-CBL-50CM Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE reliable factory supplier offers QSFP+ 40G to 4x10G Breakout Cable with ready inventory for buyers, distributors and system integrators. This 0.5m IBM BN-QS-SP-CBL-50CM compatible passive twinax breakout DAC converts one 40G QSFP+ port into four independent 10G SFP+ lanes, pre-programmed for IBM BNT / Lenovo switch platforms. Purchase bulk QSFP+ 40G to 4x10G Breakout Cable for IBM storage and data center networking deployments.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-4SFP10G-CU50CM
2 Arista Networks CAB-Q-S-0.5M
3 Juniper QFX-QSFP-DACBO-50CM
4 Brocade  40G-QSFP-4SFP-C-0105 
5 Dell 332-1365
6 Intel  X4DACBL50 
7 NVIDIA/Mellanox  MC2609130-050
8 IBM  BN-QS-SP-CBL-50CM
Description

IBM BN-QS-SP-CBL-50CM Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 0.5M QSFP+ 40G to 4x10G Breakout Cable serves as direct drop-in replacement for IBM BNT part BN-QS-SP-CBL-50CM. This passive fan-out twinax cable complies with SFF-8436 and SFF-8431 MSA standards, splitting a single 40G QSFP+ port into four separate 10G SFP+ Ethernet channels. It requires no external power and supports hot swap during routine maintenance.
We maintain stable inventory of this QSFP+ 40G to 4x10G Breakout Cable for buyers, wholesalers and IT integrators working with IBM and Lenovo hardware. Every cable is preloaded with IBM-matched EEPROM signatures to reduce unsupported-media alerts on IBM BNT rack switches. Bulk procurement, sampling and custom OEM private labeling are available for distributors, storage system builders and data center contractors.

Key Technical Specifications

IBM Compatible
BN-QS-SP-CBL-50CM  
Vendor Name HYTOPTODEVICE
Connector QSFP+ to 4 x SFP+ Max Data Rate 40Gbps
Cable Length 0.5m (1.6ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.5W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols SFF-8436, SFF-8431 and QSFP+ MSA
Minimum Bend Radius 21mm Application 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Breakout Configuration: Ensure the host QSFP+ port supports channelization. Enable breakout mode (4x10G) via the switch CLI before connecting the cable.

  • Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Do not mix this breakout DAC with straight QSFP+ to QSFP+ DAC configuration.

  • Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: 0‑70℃, indoor cabinet deployment only.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated IBM Hardware & Firmware

  • IBM BNT EN4093, EN2092 rack switches
  • Lenovo ThinkSystem / IBM Flex System chassis QSFP+ ports
  • IBM Spectrum Virtualize storage network switches

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 40G QSFP+ to 4 x 10G SFP+ passive breakout DAC cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 
  • IBM Flex System chassis 40G port breakout into four 10G uplink connections
  • IBM BNT switch high-density rack virtualization deployments
  • Short intra-rack cabling for IBM Spectrum storage and compute node communication
  • Direct replacement for original IBM BN-QS-SP-CBL-50CM breakout twinax cable
  • Hyper-converged IBM cloud cluster local fan-out wiring
  • 10G iSCSI storage fabric links for IBM storage arrays
  • Stock replenishment purchase for IT distributors and IBM solution builders

Connectivity Solutions(Applications) 

1. 40G to 4x10G Breakout Link for Switch-Switch
HYTOPTODEVICE 40G QSFP+ to four 10G SFP+ passive copper breakout dac cable for switch to switch

The Core Feature

1. About 0.5W Passive Load, Near-Zero Heat

A 40G QSFP+ host fans out to four 10G SFP+ copper lines at ~0.5 W per splitter, no active components, barely any waste heat — purpose-built for close-range, in-rack and adjacent-rack interconnects.

hytoptodevice 40G QSFP+ to Four SFP+ passive  dac cable

2.Host-Device Tested for Proven Interoperability

Every splitter is link-up tested on real target switch models; ports come online on first install across major vendor gear, no field tuning or replacement loops. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 40G QSFP+ to 4 sfp+ twinax cable for data center

3. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  40g QSFP+ to 4 x sfp+ passive dac cable for switches

FAQ

Q1: What IBM switch firmware versions work well with this BN-QS-SP-CBL-50CM compatible QSFP+ 40G to 4x10G Breakout Cable? A: It runs stably on mainstream IBM BNT EN4093 firmware releases. HYTOPTODEVICE pre-tests each batch against standard IBM firmware, reducing compatibility risks for solution providers placing stock orders.

Q2: Can I use this QSFP+ 40G to 4x10G Breakout Cable for IBM switch stacking alongside breakout mode? A: No, IBM BNT stacking mode locks the QSFP+ port as a single 40G port. Breakout and stacking functions cannot activate together, so distributors should plan port usage before purchase.

Q3: What is the expected service lifespan of stocked QSFP+ 40G to 4x10G Breakout Cable for IBM data center deployments? A: Under proper rack operating conditions, this passive twinax cable delivers 8+ years of reliable service. HYTOPTODEVICE builds each unit with high-grade copper to support long-term stock for value-added resellers.

Q4: Does ordering this IBM compatible QSFP+ 40G to 4x10G Breakout Cable require a minimum MOQ for system integrators? A: HYTOPTODEVICE supports low MOQ orders for this breakout cable. We keep ready inventory so small and mid-size IBM project buyers can place flexible purchase orders.

Q5: Can I mix this QSFP+ 40G to 4x10G Breakout Cable with IBM original transceivers in the same IBM Flex chassis? A: Yes, IBM chassis ports handle DAC and optical transceivers independently. As long as breakout mode is configured correctly, integrators can combine media types in one chassis.

Q6: What signal loss margin does this 0.5m QSFP+ 40G to 4x10G Breakout Cable reserve for IBM 40GBASE-CR4 links? A: This short 0.5m twinax design maintains ample signal margin for 40GBASE-CR4. Low signal loss makes it a reliable stocking choice for IBM storage networking buyers.

Q7: Will the IBM switch trigger log warning messages after I install this pre-coded QSFP+ 40G to 4x10G Breakout Cable? A: Minor informational logs may appear rarely; critical link-blocking alerts are eliminated via our IBM EEPROM profile. HYTOPTODEVICE pre-flash programming eases troubleshooting for IT contractors.

Q8: Can this QSFP+ 40G to 4x10G Breakout Cable be reused if I migrate my IBM workload to a new Flex chassis? A: Yes, passive DAC cables are reusable hardware. If your new IBM hardware needs different coding, HYTOPTODEVICE offers EEPROM re-programming service for existing stocked cables.

Q9: Which IBM storage networking use cases fit this QSFP+ 40G to 4x10G Breakout Cable best? A: It is ideal for short-range iSCSI storage interconnects inside IBM Flex and Spectrum clusters. Many storage resellers purchase this cable to expand 10G port density on IBM storage switches.

Q10: What packaging options are available when I buy bulk QSFP+ 40G to 4x10G Breakout Cable for IBM project rollout? A: HYTOPTODEVICE provides anti-static individual packing and bulk carton packing. Custom labeling with your reseller brand is available for large procurement orders of this breakout cable.

Q11: Does this QSFP+ 40G to 4x10G Breakout Cable support IEEE 802.3bb flow control for IBM lossless Ethernet networks? A: Yes, the passive copper media does not block pause frame flow control. It fully supports PFC and IEEE flow control settings configured on IBM BNT switches for HPC buyers.

Q12: Can this QSFP+ 40G to 4x10G Breakout Cable sustain stable links under IBM chassis high-temperature airflow? A: Its rated operating range covers 0°C to 70°C. Passive DAC generates no heat, so it works reliably under normal IBM chassis thermal conditions for stocked deployments.

Q13: What inspection reports can HYTOPTODEVICE supply with purchased QSFP+ 40G to 4x10G Breakout Cable shipments? A: We can provide batch TDR test reports and RoHS certificates upon request. This documentation helps wholesalers meet audit requirements for IBM data center tender projects.

Q14: Is this QSFP+ 40G to 4x10G Breakout Cable eligible for cross-border export shipment to IBM overseas branch sites? A: Yes, it meets global RoHS and REACH standards without restricted materials. HYTOPTODEVICE supports export documentation for international distributors purchasing this IBM compatible cable.

Q15: What should I check first if one of the four 10G breakout lanes drops after installing the QSFP+ 40G to 4x10G Breakout Cable on IBM switches? A: Start by checking SFP+ connector seating and IBM port breakout CLI settings. Lane faults most often come from loose insertion or missing channelization config for newly purchased units.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • IBM 	BN-QS-SP-CBL-50CM Compatible QSFP+ 40G to 4x10G Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

Download