• HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable for data center,hpc
  • hytoptodevice  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD passive DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper twinax cable from hytoptodevice
  • HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable for data center,hpc
  • hytoptodevice  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
  • 400G QSFP-DD passive DAC twinax cable HYTOPTODEVICE
  • 400G QSFP-DD passive direct attach copper twinax cable from hytoptodevice

Huawei QSFP-DD-400G-CU1M Compatible 400G QSFP-DD to QSFP-DD DAC Cable for Data Center 1m(3ft)  PAM4 | HYTOPTODEVICE

HYTOPTODEVICE supplies reliable 400g dac cable for data center, Huawei QSFP-DD-400G-CU1M compatible 1m 400G QSFP-DD to QSFP-DD passive twinax DAC cable, Preloaded EEPROM coding, stable PAM4 signal, low latency for data center leaf-spine fabric and AI computing racks.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QDD-400-CU1M
2 Arista Networks CAB-D-D-400G-1M
3 Dell  DAC-Q56DD-400G-1M 
4 EdgeCore  ET7502-DAC-1M
5 Huawei  QSFP-DD-400G-CU1M
6 Juniper Networks  QDD-400G-DAC-1M 
7 Mikrotik  DDQ+DA0001 
Description

Huawei QSFP-DD-400G-CU1M Compatible 400G QSFP-DD to QSFP-DD DAC Cable for Data Center 1m(3ft)  PAM4 | HYTOPTODEVICE

Product Overview

Focused on delivering high-performance 400g dac cable for data center, HYTOPTODEVICE’s 1m Huawei QSFP-DD-400G-CU1M compatible 400G QSFP-DD to QSFP-DD passive DAC cable complies with IEEE 802.3ck and SFF-8636 MSA standards. This zero-power PAM4 twinax cable adopts impedance-controlled copper conductors to support 8×50G PAM4 lanes at full 400Gbps transmission rate. Factory pre-programmed with Huawei-matched EEPROM configuration, it ensures plug-and-play identification on Huawei 400G QSFP-DD switches, storage devices and server adapters. Every cable undergoes strict signal integrity testing including insertion loss, return loss and crosstalk inspection. It is widely deployed for 1-meter intra-rack cabling, server-to-leaf switch interlinks, stacked 400G switch connections and short-range AI computing fabric links. HYTOPTODEVICE supports bulk purchase, OEM labeling and flexible MOQ for data center contractors, system integrators and cloud operators sourcing 400g dac cable for data center infrastructure upgrade.

Key Technical Specifications

Huawei
  QSFP-DD-400G-CU1M  
Vendor Name HYTOPTODEVICE
Connector QSFP-DD to QSFP-DD Max Data Rate 400Gbps
Cable Length 1m (3ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.25W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0
Minimum Bend Radius 35mm Application 400G Ethernet and InfiniBand EDR

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.

  • Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Huawei Hardware & Firmware

    • Huawei CE6885-40Y8C, CE6886-48Y8C 400G leaf switches
    • Huawei CE8855-32CQ, CE8856-64CQ high-density 400G spine switches
    • Huawei 2288H V7, 2488H V7 AI servers equipped with QSFP-DD NIC ports
    • Huawei QSFP-DD 400G network interface cards
    • Huawei VRP 8.21, 8.22 and newer firmware releases
    • Huawei iMaster NCE network management system compatible

    2. Multi-Brand Cross Interoperability

    Built on universal MSA open standards, this 400G QSFP-DD DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.

    3. Free Value-Added Services

    • Custom firmware for multi-device compatibility
    • Support sample testing before bulk orders for project pre-verification
    • Private-label customization and professional deployment guidanc
    • Strict batch consistency quality control
    • Free custom EEPROM programming for special and legacy network environments
    • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

    Primary Application Scenarios 

    • Intra-rack 400G interconnection inside Huawei data center, AI compute and storage racks
    • Short jumpers for stacked Huawei 400G data center switches
    • Server-to-leaf switch cabling for Huawei AI server clusters
    • 400G leaf-spine network upgrade and reconstruction for enterprise and carrier data centers
    • Bulk procurement for data center contractors, solution partners and system integrators
    • Lab POC validation for 400G PAM4 QSFP-DD passive DAC links

    Connectivity Solutions(Applications) 


    1. 400G to 400G Direct Link for Switch-Switch
    hytoptodevice wholesale 400G short-reach DAC twinax cable for switch to swith link


    2. 400G to 400G Direct Link for Switch-NIC
    hytoptodevice 400G QSFP-DD to QSFP-DD dac cable wholesale


    3. 400G Data Center Networking Solution for HPC

    hytoptodevice 400G QSFP-DD DAC cable for 400G data center


    The Core Feature

    1.Two Parts Out. One Cable In.

    The 400G DAC cable runs on a single twinax copper link, replacing the fiber pair and two transceivers — plug-and-play 400G for short-reach runs, nothing more to install.

    hytoptodevie third-party compatible 400G QSFP-DD passive twinax cable

    2. Zero Power Draw. Zero Added Heat.

    No power. No heat. No compromise. The 400G QSFP-DD passive DAC cable keeps dense racks cool while sustaining a low-latency 400G link for in-rack and adjacent-rack connections in data center.

    400G QSFP-DD to QSFP-DD passive direct attach copper twinax cable for data center switch

    3.Verified on Your Host. Ready on Arrival

    Every 400G passive DAC cable is matched and validated against the exact switch it will plug into — checked, then shipped. Deploy with zero guesswork: no link flaps, no port lockouts, no compatibility surprises. Unsure it matches your setup? Send us your switch model — we'll confirm compatibility before you order. Compatibility Video available upon request.

    hytoptodevice wholesale 400G QSFP-DD passive attach copper twinax cable for data center

    4. 100% Individually Tested for Peak Performance

    Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

    HYTOPTODEVICE  QSFP-DD  to QSFP-DD 400g direct attach copper cable for switches

    FAQ

    Q1: Will this Huawei-coded 400G QSFP-DD DAC be recognized normally in multi-vendor data center fabrics? A1: Recognition depends on EEPROM programming. As a supplier of 400g dac cable for data center, HYTOPTODEVICE provides single or dual-vendor coding options. With matched coding, it works seamlessly on most MSA-compliant QSFP-DD platforms.

    Q2: Is a QSFP-DD cable backward compatible with older QSFP28 (100G) or QSFP56 (200G) ports? A2: Physically, QSFP-DD ports are designed to accept older QSFP28 or QSFP56 modules with certain physical and software limitations. However, this 400G QSFP-DD DAC cannot operate when inserted into legacy 100G/200G ports because of mismatched form factor and electrical lane definition.

    Q3: Does adopting third-party Huawei compatible 400G DAC cable invalidate the warranty of Huawei network hardware? A3: It will not automatically void your Huawei switch or NIC warranty. Our HYTOPTODEVICE passive DAC cable complies with MSA and IEEE 802.3ck standards. Hardware vendors only deny warranty claims when cable defects directly cause permanent port damage.

    Q4: Can I connect different brands of network interface cards (NICs) on each end of the cable? A4: Yes, provided each end is correctly coded or compatible with the respective hardware requirements of the connected servers or switches. HYTOPTODEVICE offers dual-sided custom EEPROM coding service to support mixed-brand NIC interconnection for bulk deployments.

    Q5: Does this Huawei compatible 400G QSFP-DD DAC support standard auto-negotiation for data center Ethernet links? A5: Yes. This HYTOPTODEVICE passive DAC cable supports IEEE auto-negotiation. The negotiation function is managed by the switch or NIC firmware instead of the passive copper cable itself.

    Q6: What is the maximum stable transmission distance for our passive 400G QSFP-DD DAC used in data center? A6: Our maximum supported length for passive 400G QSFP-DD copper twinax is 3 meters. HYTOPTODEVICE supplies 0.5m, 1m, 2m and 3m variants; passive copper cannot preserve 400G PAM4 signal integrity beyond 3m.

    Q7: How does latency of 400G passive DAC compare with fiber links for Huawei data center leaf-spine networks? A7: 400G copper DAC delivers lower latency than fiber links. Electrical signals travel faster in copper than light through glass fiber, and DAC removes extra transceiver chip latency. Our 400g dac cable for data center is ideal for low-latency AI and HPC workloads.

    Q8: What wire gauge (AWG) is typically used in 400G QSFP-DD cables? A8: Short lengths including 0.5m and 1m use 30AWG for better flexibility. 2m and 3m versions adopt 28AWG to minimize signal attenuation. HYTOPTODEVICE matches the proper AWG for every length to stabilize 400G PAM4 signal transmission.

    Q9: Can this Huawei 400G QSFP-DD DAC sustain continuous full line-rate traffic in busy data center environments? A9: Yes, within rated length and proper operating environment. Every HYTOPTODEVICE passive DAC cable passes line-rate burn-in testing, supporting sustained 400G line-rate traffic with zero packet loss.

    Q10: Can this Huawei compatible 400G DAC be re-coded for InfiniBand NDR besides Ethernet for data center use? A10: It relies on EEPROM setup and host configuration. HYTOPTODEVICE can program this 400G QSFP-DD DAC for Ethernet or InfiniBand NDR; kindly specify your transmission mode when placing bulk orders.

    Q11: What latch mechanism is fitted on the QSFP-DD connectors of this Huawei 400G DAC cable? A11: It uses standard bail-clasp pull-tab latches. This mainstream design from HYTOPTODEVICE enables easy, tool-free plugging and unplugging without scratching or damaging switch ports.

    Q12: Is this 1m passive 400G DAC suitable for cross-rack interconnection in large data center layouts? A12: Not recommended for regular cross-rack deployment. Our passive 400G twinax max reach is 3m, only suitable for adjacent racks. Longer cross-rack connections need 400G AOC fiber cables.

    Q13: Can I request custom jacket colors for large data center bulk orders of Huawei QSFP-DD-400G-CU1M compatible DAC cables? A13: Standard jacket color is black. HYTOPTODEVICE supports custom jacket colors for bulk OEM orders, you can submit color requirements alongside EEPROM coding requests before production.

    Q14: What troubleshooting steps should be taken if this Huawei 400G DAC fails to bring up link in a data center network? A14: The link will stay down and the VRP system may log link failure alerts. Check connector seating, confirm EEPROM coding matches your Huawei hardware, and inspect for over-bending. HYTOPTODEVICE technical team can assist with link debugging.

    Q15: Why is passive 400G DAC a cost-effective cabling choice for short-range data center fabric? A15: Passive DAC contains no laser chips, photodiodes or optical components. As a professional provider of 400g dac cable for data center, HYTOPTODEVICE builds these cables with copper and shielding materials, cutting hardware cost compared to optical modules.

    Packaging & Custom OEM Solutions

    • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

    • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


    Why Network Engineers Choose HYTOPTODEVICE

    HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

    • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
    • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
    • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
    • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
    • Free pre-sales engineering support for custom EEPROM  & private label firmware
    • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


    “Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


    Quality Certification & Compliance

     At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

    We adhere to rigorous standards for our SFP modules and network solutions:

    • ISO 9001: Certified quality management and production consistency.

    • CE & FCC: Fully compliant for seamless Global Market Access.

    • RoHS: Committed to environmental responsibility and hazardous material control.

    • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

    Certified Quality. Global Standards. Guaranteed Performance.




    Rigorous Industrial Product Testing

       hytoptodevice check device and equiptment for optical transceiver module

    100% 3rd Party Compatible
    testing device for hytoptodevice 10g sfp+ bidi optical module
    Partial Test Demonstration
    hytoptodevice compatible optical transceiver module for ethernet,data center


    • HYTOPTODEVICE compatible 400G QSFP-DD passive copper twinax cable for data center,hpc
    • hytoptodevice  compatible 400G QSFP-DD to QSFP-DD PAM4 passive copper twinax cable for data center
    • 400G QSFP-DD passive DAC twinax cable HYTOPTODEVICE
    • 400G QSFP-DD passive direct attach copper twinax cable from hytoptodevice

    Download