| NO. | Brand | Compatible P/N | Transceive Type |
| 1 | Cisco | SFP-H25G-CU3M | |
| 2 | Arista Networks | CAB-S-S-25G-3M | |
| 3 | Dell | DAC-SFP-25G-3M | |
| 4 | H3C | SFP-25G-D-CAB-3M | |
| 5 | Juniper | JNP-25G-DAC-3M | |
| 6 | NVIDIA(Mellanox) | MCP2M00-A003 | |
| 7 | HPE Aruba | JL488A | |
| 8 | HPE | 844477-B21 |
| HPE(Aruba) Compatible | JL488A | Vendor Name | HYTOPTODEVICE |
| Connector | SFP28 to SFP28 | Max Data Rate | 25Gbps |
| Cable Length | 3m (10ft) | Wire AWG | AWG 26 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius | 21mm | Application | 25G Ethernet, Data Center, 5G Wireless |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this SFP28 25G twinax cable can interoperate with mainstream network brands including Cisco, Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Can this HPE Aruba compatible SFP28 to SFP28 25g twinax cable run full 25G rate stably on AOS-CX? A: Yes, this HYTOPTODEVICE 25g twinax cable supports full 25.78125Gbps line rate. It is pre-programmed with Aruba EEPROM and validated on AOS-CX for reliable 25GBASE-CR links; RS-FEC is optional for this 3m length.
Q2: What is the maximum reliable transmission distance for a 25g twinax cable? A: The rated maximum reach for 25g twinax cable is 5 meters. This 3m variant stays within safe insertion loss budget for standard Aruba rack deployments.
Q3: Can this SFP28 to SFP28 25g twinax cable connect Aruba 8360 switches to NVIDIA ConnectX NICs? A: Cross-brand interconnection works reliably with unified 25GBASE-CR and matching FEC parameters. This 25g twinax cable follows MSA standards for mixed-vendor VSX and HCI fabrics.
Q4: What key difference separates a 25g twinax cable from older SFP+ 10G twinax DAC? A: A 25g twinax cable delivers up to 25G bandwidth, while SFP+ twinax only supports 10G. This cable matches Aruba’s modern high-speed SFP28 ports for VSX stacking.
Q5: What link issues will occur if a 25g twinax cable exceeds its 5-meter rated limit? A: 25G high-speed copper suffers rapid signal attenuation beyond 5m. Longer lengths trigger CRC errors and link flapping; use AOC active optical cables for cross-rack runs.
Q6: Which Aruba networking workloads get the biggest latency gain with this 25g twinax cable? A: VSX stacking, NVMe-oF and HCI virtualization traffic benefit most. This HYTOPTODEVICE 25g twinax cable maintains steady ultra-low latency.
Q7: Can this 3m SFP28 to SFP28 25g twinax cable link two servers point-to-point directly? A: Direct server-to-server interconnection is fully supported with correct port configuration. This 25g twinax cable works well for storage sync inside Aruba fabric racks.
Q8: How does AWG wire gauge affect signal performance of a 3m 25g twinax cable? A: 30AWG balances flexible routing and acceptable signal loss for 3m runs; 26AWG provides better loss margin near the 5m threshold. This cable uses 30AWG twinax optimized for Aruba dense racks.
Q9: Will AOS-CX firmware upgrades affect switch detection of this 25g twinax cable? A: MSA-compliant 25g twinax cable keeps compatibility across mainstream AOS-CX releases. Preloaded Aruba EEPROM guarantees stable identification after firmware updates.
Q10: When should AOC fiber replace a 25g twinax cable in Aruba fabric architecture? A: Select active optical cables for cross-rack links or distances above 5 meters. A 25g twinax cable is zero-power and cost-effective for intra-rack VSX connections.
Q11: How much latency saving can a 25g twinax cable deliver versus fiber transceiver links? A: A 25g twinax cable cuts roughly 30–60ns latency by removing optical-electrical conversion. This advantage suits latency-sensitive enterprise storage traffic.
Q12: Can this SFP28 to SFP28 25g twinax cable negotiate 25G speed on legacy SFP+ 10G Aruba ports? A: 25G negotiation fails on SFP+ ports due to different electrical specs. Both ports require native SFP28 interfaces to run this 25g twinax cable at full bandwidth.
Q13: Can QSFP28 breakout DAC replace this SFP28 to SFP28 25g twinax cable on Aruba SFP28 ports? A: Breakout DAC uses separate pin mapping and split logic. It cannot substitute this standard point-to-point 25g twinax cable.
Q14: What quality validation tests does HYTOPTODEVICE perform on each batch of 25g twinax cable? A: Every batch undergoes BER scanning, link verification and hot-swap testing on Aruba 8360 AOS-CX platforms. Tests confirm EEPROM readability and stable 25G signal quality.
Q15: What installation restrictions should bulk buyers note for a 25g twinax cable in Aruba fabric design? A: A 25g twinax cable is designed only for short intra-rack copper connections. It is not suitable for inter-row or long-distance cross-room transmission.
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




