| NO. | Brand | Compatible P/N | Transceive Type |
| 1 | Cisco | SFP-H25G-CU3M | |
| 2 | Arista Networks | CAB-S-S-25G-3M | |
| 3 | Dell | DAC-SFP-25G-3M | |
| 4 | H3C | SFP-25G-D-CAB-3M | |
| 5 | Juniper | JNP-25G-DAC-3M | |
| 6 | NVIDIA(Mellanox) | MCP2M00-A003 | |
| 7 | HPE Aruba | JL488A | |
| 8 | HPE BladeSystem | 844477-B21 |
| HPE BladeSystem Compatible | 844477-B21 | Vendor Name | HYTOPTODEVICE |
| Connector | SFP28 to SFP28 | Max Data Rate | 25Gbps |
| Cable Length | 3m (10ft) | Wire AWG | AWG 26 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius | 21mm | Application | 25G Ethernet, Data Center, 5G Wireless |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this SFP28 25G DAC cable can interoperate with mainstream network brands including Cisco, Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Can this HPE BladeSystem compatible hpe 25g dac cable run full 25G rate stably on HPE interconnect modules? A: Yes, this HYTOPTODEVICE hpe 25g dac cable supports full 25.78125Gbps line rate. It is pre-programmed with HPE EEPROM and validated for stable 25GBASE-CR links; RS-FEC is optional for this 3m length.
Q2: What is the maximum safe working distance for an hpe 25g dac cable? A: The rated maximum reach for passive SFP28 hpe 25g dac cable is 5 meters. This 3m version stays within acceptable signal loss budget for HPE blade enclosures.
Q3: Can this hpe 25g dac cable link HPE BladeSystem interconnects to Arista leaf switches? A: Cross-brand interconnection works reliably with unified 25GBASE-CR and consistent FEC settings. This hpe 25g dac cable follows MSA standards for multi-vendor blade server fabrics.
Q4: What performance advantage does an hpe 25g dac cable have over old 10G SFP+ DAC? A: An hpe 25g dac cable supports 25G bandwidth, while SFP+ 10G DAC only reaches 10G. It matches the modern high-speed SFP28 ports on HPE blade hardware.
Q5: What problems arise if an hpe 25g dac cable runs longer than its 5m specification? A: 25G copper twinax suffers sharp signal attenuation past 5 meters. Longer runs cause CRC errors and link bouncing; select AOC fiber cables for cross-rack connections.
Q6: Which HPE BladeSystem workloads gain most latency benefit from this hpe 25g dac cable? A: Blade-to-storage NVMe-oF and virtual machine migration traffic benefit most. This HYTOPTODEVICE hpe 25g dac cable maintains consistent ultra-low latency.
Q7: Can this 3m hpe 25g dac cable connect two HPE blade server adapters point to point? A: Direct blade NIC-to-NIC interconnection is fully supported with proper port configuration. This hpe 25g dac cable works well for local blade cluster sync.
Q8: How does AWG wire gauge impact signal performance of a 3m hpe 25g dac cable? A: 30AWG balances flexible routing and acceptable signal loss for 3m runs; 26AWG delivers better loss margin close to the 5m threshold. This cable uses 30AWG twinax optimized for dense HPE blade racks.
Q9: Will HPE interconnect firmware updates break recognition of this hpe 25g dac cable? A: MSA-compliant hpe 25g dac cable retains compatibility across mainstream HPE firmware releases. Preloaded HPE EEPROM ensures reliable identification after upgrades.
Q10: When should I pick AOC fiber instead of an hpe 25g dac cable for HPE blade fabrics? A: Choose active optical cables for inter-rack links or distances over 5 meters. An hpe 25g dac cable is zero-power and low-cost for intra-enclosure blade connections.
Q11: What latency reduction can an hpe 25g dac cable provide compared with fiber plus transceivers? A: An hpe 25g dac cable cuts roughly 30–60ns latency by removing optical-electrical conversion. This benefit is valuable for blade storage and VM migration traffic.
Q12: Can this hpe 25g dac cable negotiate 25G speed on legacy SFP+ 10G HPE ports? A: 25G negotiation will fail on SFP+ ports due to different electrical specifications. Both ends require native SFP28 ports to run this hpe 25g dac cable at full bandwidth.
Q13: Can QSFP28 breakout DAC replace this SFP28 to SFP28 hpe 25g dac cable on HPE SFP28 ports? A: Breakout DAC uses separate pin definition and split logic. It cannot substitute this standard point-to-point hpe 25g dac cable.
Q14: What quality tests does HYTOPTODEVICE run on each batch of hpe 25g dac cable? A: Each batch goes through BER scanning, link validation and hot-swap testing on HPE BladeSystem interconnect hardware. Tests verify EEPROM readability and stable 25G signal quality.
Q15: What installation limits should bulk buyers know for an hpe 25g dac cable in blade deployments? A: An hpe 25g dac cable is designed exclusively for short intra-rack and intra-enclosure copper links. It is not suitable for long cross-room or inter-building connections.
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




