HPE BladeSystem 487655-B21 Compatible SFP+ DAC Direct Attach Copper Cable 3m | 10GBASE-CU Passive Twinax Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE HPE BladeSystem 487655-B21 compatible SFP+ DAC direct attach copper cable serves as a perfect drop-in replacement for the original HPE 3m 10G passive twinax DAC. It complies with SFF-8431 and 10GBASE-CU MSA standards. As a reliable manufacturer ready for your purchase and bulk procurement of SFP+ DAC direct attach copper cable, we deliver stable ultra-low-latency 10Gbps transmission. This cable fits HPE rack trunk, server uplink and intra-rack switch stacking scenarios.
It comes pre-programmed with HPE EEPROM signature for plug-and-play operation and avoids transceiver warning alerts on HPE switching platforms. HYTOPTODEVICE factory supports bulk purchase, sample testing and OEM private label for data center and enterprise networking integration projects.
Key Technical Specifications
| HPE BladeSystem |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
3m (10ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated HPE Hardware & Firmware
This SFP+ DAC direct attach copper cable is preloaded with HPE EEPROM data, supports alarm-free plug-and-play on HPE network hardware. Every cable passes target device testing before leaving our factory:
• HPE BladeSystem c-Class enclosures
• HPE FlexFabric 5700, 5900 series data center switches
• HPE Aruba 2930F, 3810 enterprise switches
• HPE SFP+ server NIC and converged network adapters
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this SFP+ DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• HPE BladeSystem switch to server 10G rack trunk uplink
• Intra-rack HPE switch stacking interconnection
• Leaf-spine fabric short-range interconnection
• Virtualization cluster and storage fabric interconnection
• Bulk purchase and procurement for HPE data center contractors and integrators
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the SFP+ 10G DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive SFP+ 10G DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
1: Can I purchase this HPE compatible twinax DAC to connect network devices from different vendors in my server room?
A: Yes, this HYTOPTODEVICE SFP+ DAC direct attach copper cable supports cross-brand interconnection if both sides follow the 10GBASE-CU MSA standard. Consistent port configuration ensures stable cross-vendor links between HPE and other brand hardware.
Q2: If I plan to procure DAC cables for future hardware upgrades, can we modify the EEPROM signature later?
A: Yes, HYTOPTODEVICE offers EEPROM reprogramming service for our bulk SFP+ DAC direct attach copper cable. We provide coding tools for buyers to rewrite signatures when migrating to new network hardware platforms.
Q3: Will buying third-party twinax DAC cables void the original warranty of HPE BladeSystem hardware?
A: Generally no, third-party compliant 10G DACs like our HYTOPTODEVICE 3m HPE compatible twinax cable will not automatically void OEM warranty. Hardware damage caused by faulty DACs will be excluded, while normal interoperability use stays covered.
Q4: Should I avoid 24AWG DAC options when purchasing cabling for tightly packed HPE blade racks?
A: Yes, 24AWG DAC cables have larger outer diameter and less flexibility than our standard 30AWG HYTOPTODEVICE SFP+ DAC direct attach copper cable. Thicker conductors bring better signal reach but increase routing difficulty in cramped high-density rack spaces.
Q5: Is it acceptable to run passive twinax DAC outside the rack cabinet after I purchase these cables?
A: No, passive twinax DAC cables such as our HYTOPTODEVICE 10GBASE-CU cable are designed for indoor intra-rack use only. They lack outdoor-rated jacket and flame ratings required for wall penetration or exposed outdoor runs.
Q6: When I procure 3m links for blade chassis, is active DAC a better option than passive twinax DAC?
A: No, passive DAC is preferred for runs under 3 meters, including our 3m HYTOPTODEVICE HPE compatible SFP+ DAC direct attach copper cable. Passive types consume <0.1W with simpler structure while active DAC adds signal amplification with extra power draw and higher cost.
Q7: Which cabling solution saves more budget during procurement: twinax DAC or fiber with standalone SFP+ optics?
A: SFP+ DAC twinax cable is more cost-effective for short intra-rack links, and our HYTOPTODEVICE bulk SFP+ DAC pricing beats the combined cost of transceivers plus fiber patch cords. Fiber becomes economical only for distances over 7–10 meters.
Q8: Will the passive twinax DAC I buy deliver lower latency than fiber or RJ45 copper connections?
A: Yes, 10G passive twinax DAC delivers lower latency than fiber and 10G RJ45 copper. Our HYTOPTODEVICE SFP+ DAC direct attach copper cable removes optical conversion steps, cutting latency to sub-nanosecond levels for low-latency trading and HPC clusters.
Q9: Does this 10GBASE-CU DAC support speed auto-reduction when connecting older 1G hardware after purchase?
A: No, our 10GBASE-CU SFP+ DAC direct attach copper cable locks to 10G rate. 10GBASE-CU standard does not support auto-negotiation fallback to 1G or 100M, so both connected ports must be set manually to 10G.
Q10: What temperature specs should I check before I procure DAC cables for hot aisle blade deployments?
A: Our standard commercial-grade HYTOPTODEVICE SFP+ DAC direct attach copper cable runs 0℃ ~70℃. For hot aisles or industrial racks, we supply industrial temperature variants rated -40℃ ~85℃ for stable continuous operation.
Q11: How durable are the pull tabs if I purchase these DACs for frequent blade maintenance and re-cabling?
A: The pull tab and latch on HYTOPTODEVICE SFP+ DAC direct attach copper cable are tested for over 500 hot-plug cycles. Reinforced plastic tabs prevent breakage during frequent re-cabling inside dynamic data center environments.
Q12: Can the 10G SFP+ DAC I bought work when plugged into legacy 1G SFP ports on older switches?
A: No, 10G SFP+ DAC cannot negotiate or work on a native 1G SFP port. Our HYTOPTODEVICE 10GBASE-CU SFP+ DAC direct attach copper cable requires SFP+ 10G-capable ports on both ends to establish a link.
Q13: Why do generic uncoded DACs fail link negotiation on HPE BladeSystem after procurement?
A: This usually comes from mismatched EEPROM signature. Our HYTOPTODEVICE HPE BladeSystem 487655-B21 compatible SFP+ DAC direct attach copper cable can be pre-coded with HPE signature to work smoothly with HPE switches and bypass identity checks for stable link activation.
Q14: What performance tests confirm the DAC quality before bulk purchase and shipment?
A: You can verify compliance by BER testing, insertion loss and return loss measurement. Every HYTOPTODEVICE bulk SFP+ DAC direct attach copper cable passes target switch testing and MSA SFF-8431 validation before shipment.
Q15: What diagnostic functions can DDM/DOM support on the passive twinax DAC you supply for purchase?
A: DDM/DOM is digital diagnostic monitoring for transceiver parameters, and our HYTOPTODEVICE 10G SFP+ DAC direct attach copper cable supports basic DDM readout. Passive DACs report cable and identity data but do not monitor optical power values.
Q16: What BER performance standard should I look for when I procure DAC for production HPE blade environments?
A: The target BER for stable 10GBASE-CU DAC links is ≤1×10⁻¹². All HYTOPTODEVICE SFP+ DAC direct attach copper cable are tested to hit this BER threshold to eliminate CRC errors for 24/7 data center operation.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

