• HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE

HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft) Passive Direct Attach Copper Twinax Cable-HYTOPTODEVICE

Buy HYTOPTODEVICE HPE Aruba JL487A compatible 25G SFP28 passive direct attach copper cable. 0.5m /1.6ft 25GBASE‑CR twinax, pre‑programmed EEPROM, zero‑power consumption. Bulk factory wholesale, OEM & custom EEPROM available for HPE Aruba OS‑CX hardware, distributors and system integrators.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco SFP-H25G-CU50CM
2 Arista Networks CAB-S-S-25G-0.5M
3 Dell  DAC-SFP-25G-0.5M
4 HPE Aruba  JL487A
5 HPE BladeSystem   844471-B21
6 Juniper  SFP-25G-DAC-50CM 
7  NVIDIA(Mellanox)  MCP2M00-A00A
Description

HPE Aruba JL487A Compatible 25G SFP28‑to‑SFP28 Passive DAC Cable 0.5m | 25GBASE‑CR Twinax Copper Cable Bulk Wholesale HYTOPTODEVICE

Produce Overview

    The HYTOPTODEVICE JL487A is a high-performance HPE Aruba compatible 25G SFP28 Passive Direct Attach Copper (DAC) cable. With a length of 0.5 meters (1.6 ft), it is specifically designed for high-density, ultra-low latency connections between Aruba switches and 25G-enabled servers or for close-proximity switch stacking.In the 25GbE era, signal precision is vital. HYTOPTODEVICE utilizes high-quality shielded twinaxial copper optimized for 25Gbps NRZ signaling. This short-reach solution offers near-zero power consumption and the lowest possible latency, making it the ideal choice for Aruba Virtual Switching Framework (VSF) and high-frequency data center fabrics. Fully compliant with SFF-8402 and recognized natively by ArubaOS-CX, it serves as a stable long-term supply alternative for mission-critical enterprise networks.

Key Product Parameters

HPE Aruba Compatible  JL487A      Vendor Name HYTOPTODEVICE
Connector SFP28 to SFP28 Max Data Rate 25Gbps
Cable Length 50Cm (1.6ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.5W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000
Minimum Bend Radius 21.25mm Application 25G Ethernet, Data Center, 5G Wireless

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.

  • Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Works only with standard SFP28  25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.

  • Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated HPE Hardware & Firmware

This cable adopts HPE‑Aruba‑specific EEPROM, supporting zero‑alarm plug‑and‑play under official OS‑CX firmware. All products are strictly tested, fully compatible with the below hardware models:

HPE Aruba OS‑CX Data‑Center Switches
• Aruba 8325, 8360 series high‑density leaf‑spine switches
• Aruba CX 10000‑48Y6C high‑performance data‑center switches
• Aruba CX 6400 modular chassis switches
• Aruba CX 5420 aggregation switches

HPE ProLiant Servers with SFP28 NIC/CNA adapters
• HPE ProLiant DL385, DL380, DL360 Gen10 / Gen11 rack servers
• HPE Synergy compute modules with 25G SFP28 mezzanine adapters
• HPE Simplivity hyper‑converged appliances equipped with 25G SFP28 network adapters

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this SFP28 DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 

• Short intra‑rack 25G links between Aruba ToR switches and HPE ProLiant servers
• HPC, cloud and Simplivity hyper‑converged cluster fabric connections
• Internal fabric cabling for HPE Synergy modular chassis
• Cost‑saving hardware replacement for HPE‑Aruba network upgrade projects
• Bulk sourcing for distributors, resellers and system integrators


Connectivity Solutions(Applications) 

1. 25G to 25G Direct Link for Switch-Switch
25g sfp28 passive dac cable for switch to switch
2. 25G to 25G Direct Link for Switch-NIC
hytoptodevice 25g sfp28 passive copper twinax cable for switch to NIC
The Core Feature


1.
Cost-Effective Ultra-Short Connectivity

Using twinax copper, the 25gb SFP28 Passive DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

HYTOPTODEVICE bulk factory wholesale 25G SFP28 DAC cable

2. Ultra-Low Power, Maximum Energy Efficiency

The passive 25g SFP28 passive DAC cable draws lower power consumption, reducing heat and energy costs in dense racks, while delivering a cost-effective, high-speed and low-latency 25G link for short-reach connections — within a rack or across adjacent racks.

bulk factory wholesale 25G SFP28 DAC cable WITH LOW power from hytoptodevice

3.Host-Device Tested for Proven Interoperability

Every SFP28 passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits? Compatibility Video available upon request.

compatible 25g sfp28 direct attach copper cable for data center

4. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE 25G sfp28  dac cable with comprehensive factory testing stable performance for  platforms bulk wholesale orders


FAQ

Q1:Is this 25G SFP28 cable natively backward compatible with 10G SFP+ ports? A:Although SFP28 and SFP+ connectors are physically identical, standard SFP28 25G DAC is programmed as high-speed devices. Most ports that support only 10G cannot recognize 25G-coded cables due to a mismatch in EEPROM identifiers. Most Dell S-Series 25G ports support dual-speed operation at 10G and 25G.

Q2:How far can I run a SFP28 25G DAC cable?A:Because DAC cables are made of dual-core copper wire, they are relatively heavy and experience signal attenuation at a faster rate than fiber optic cables; therefore, the actual transmission distance for SFP28 25G DAC cable is limited to 7 meters or less.

Q3:
What is the power consumption of this passive SFP28 25G DAC compared to 25G SR optics? A: HYTOPTODEVICE passive 25G DAC consumes near zero power (≤0.5W) and generates no heat. By comparison, a pair of 25G SR fiber optical transceivers consumes approximately 1.5W to 2.0W of power. For a rack containing 48 servers, switching to the HYTOPTODEVICE 25G DAC can save nearly 100W of power and significantly reduce the cooling load.

Q4:We have both Intel and Broadcom NICs in our PowerEdge R750. Will this work for both??A:Yes. The 25G SFP28 interface is standardized. As long as the network card is a Dell-branded or Dell-certified 25G adapter (such as the Intel XXV710 or Broadcom 57414), HYTOPTODEVICE SFP28 25G cables provide seamless “plug-and-play” connectivity. We have tested our cables with two mainstream controller types to ensure broad hardware compatibility.


Q5:Does 25G SFP28 DAC use Multi-mode or Single-mode fiber?A:Neither. The DAC(Direct-Attach Copper) is a copper cable. using a twinaxial copper architecture (Twinax) to transmit electrical signals directly, no light signals.There are not lasers or optical glass in DAC cable,  it is much cheaper than fiber optics.

Q6:Where to buy 25G SFP28 DAC cable?A:There are many factories that produce and sell  passive DAC, but DAC manufacturer china HYTOPTODEVICE is the excellent provider: a source factory, fully controllable process, reliable performance, 100% compatible, sufficient inventory, fast delivery.


Q7:Is 25G SFP28 DAC hot-swappable?A:HYTOPTODEVICE SFP28 25G DAC is hot-pluggable, hot Pluggable SFP28 Compliant.you can plug or unplug the passive DAC, while the device is powered on without damaging the hardware.

Q8:who makes the best 25G SFP28 DAC cable
?A: Transceiver Manufacturer China HYTOPTODEVICE is the excellent provider.Sorce factory,reliable quality, 100% compatibiltiy.fast delivery and quick response.HYTOPTODEVICE send a tool that allows you to re-program the compatibility of your cables yourself.

Q9:What is the difference between 24AWG and 26AWG for a 5-meter 25G SFP28 DAC cable?A: The main difference lies in signal integrity. 24 AWG cables have a larger cross-sectional area, which significantly reduces resistance. For a 5-meter SFP+ copper cable, the eye diagram of a 24 AWG cable is “clearer” than that of a 26 AWG cable, thereby providing better electromagnetic interference shielding and more stable performance in high-density, high-interference data center environments.

Q10:
What is the difference between "Passive" and "Active" DAC?There are distinct differences between Passive and Active DAC.The Passive DAC has no signal amplification. its lengths is under 7m. With zero power consumptions,it cost is cheaper. The Active DAC contains a chip to boost the signal. Used for slightly longer copper runs (up to 10m-15m) and is generally thinner/more flexible.

Q11:Can I plug a 25G DAC into a 10G SFP port?A:No. SFP28 (25G) ports can often accept 10G transceivers, but a 10G SFP port cannot scale up to recognize a 25G DAC cable. You should Make sure the cable speed matches the port with the lowest rated speed.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE
  • HPE Aruba JL487A Compatible 25G SFP28 to SFP28 DAC Cable 50cm (1.6ft)  Passive  Direct  Attach Copper Twinax Cable-HYTOPTODEVICE

Download