| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-H25G-CU2M | |
| 2 | Arista Networks | CAB-S-S-25G-2M | |
| 3 | Dell | DAC-SFP-25G-2M | |
| 4 | H3C | SFP-25G-D-CAB-2M-A | |
| 5 | Juniper | JNP-25G-DAC-2M | |
| 6 | NVIDIA(Mellanox) | MCP2M00-A002 |
| H3C Compatible | SFP-25G-D-CAB-2M-A | Vendor Name | HYTOPTODEVICE |
| Connector | SFP28 to SFP28 | Max Data Rate | 25Gbps |
| Cable Length | 2m (7ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius | 21mm | Application | 25G Ethernet, Data Center, 5G Wireless |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 25G SFP28 Passive DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.






Q2: What is the maximum reliable transmission distance supported by this 25G SFP28 passive dac cable? A: The rated maximum reach for 25G SFP28 passive dac cable is 5 meters. This 2m cable stays well within copper signal loss budget for H3C same-rack deployments.
Q3: Can this passive dac cable build cross-brand links between H3C switches and NVIDIA ConnectX NICs? A: Cross-brand interconnection works reliably with unified 25GBASE-CR and matching FEC settings. This passive dac cable follows MSA specs for mixed-vendor data center fabrics.
Q4: What is the core difference between SFP28 and SFP+ form factor for passive dac cable? A: SFP28 form factor supports up to 25G signaling while SFP+ only reaches 10G. This passive dac cable uses SFP28 housing to match modern H3C 25G ports.
Q5: What kind of link fault will appear if this passive dac cable runs longer than 5 meters? A: 25G twinax copper signal attenuates sharply beyond the limit. Length over 5m triggers CRC errors and link flapping; longer connections need fiber optical cables.
Q6: Which business applications gain the most latency advantage using this passive dac cable on H3C fabrics? A: NVMe storage, virtualization and HPC clusters get the most benefit. This HYTOPTODEVICE passive dac cable delivers consistent low latency for these H3C workloads.
Q7: Can this 2m passive dac cable be used for direct point-to-point links between two servers? A: Direct server-to-server interconnection is fully supported with proper port configuration. This passive dac cable works well for storage replication and cluster sync within a single rack.
Q8: How does AWG wire gauge influence signal performance for 2m passive dac cable deployment? A: 30AWG offers flexible routing for 2m runs, while 26AWG retains better loss margin close to 5m. This cable adopts 30AWG twinax optimized for H3C rack cabling layout.
Q9: Will Comware firmware upgrade affect the identification of this passive dac cable? A: MSA-compliant passive dac cable remains compatible after routine Comware firmware updates. Preloaded H3C EEPROM maintains stable recognition on mainstream releases.
Q10: When should AOC fiber cable replace passive dac cable in H3C data center design? A: Select active optical cables for cross-rack links or distances above 5 meters. Passive dac cable is zero-power and cost-effective for short intra-rack 25G connections.
Q11: How much latency reduction can passive dac cable deliver compared with optical transceiver links? A: Passive dac cable cuts roughly 30–60ns latency by removing optical-electrical conversion. This improvement is valuable for latency-sensitive storage and computing.
Q12: Can this SFP28 passive dac cable negotiate 25G speed on legacy SFP+ 10G ports of H3C devices? A: 25G negotiation is impossible on SFP+ ports due to different electrical specifications. Both ends require native SFP28 ports to run this passive dac cable at full 25G.
Q13: Can QSFP28 breakout 4×25G DAC substitute this SFP28 passive dac cable on H3C SFP28 ports? A: Breakout DAC uses separate pin mapping and split logic. It cannot replace this standard SFP28-to-SFP28 point-to-point passive dac cable.
Q14: What compatibility verification tests does HYTOPTODEVICE run for this H3C passive dac cable before shipment? A: Each batch runs BER scanning, link-up and hot-swap validation on H3C Comware switches. Testing confirms EEPROM detection and steady 25G performance.
Q15: What deployment restrictions should buyers know before bulk purchasing passive dac cable for H3C fabrics? A: Passive dac cable is designed exclusively for short intra-rack copper links. It is not suitable for inter-row or long-distance cross-room transmission.
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




