•  Foundry Networks  E1MG-100FX-IR  compatible optical transceiver, OC-3/STM-1 IR-1 1310nm 15km single-mode LC duplex SFP optical transceiver for  Foundry Networks  carrier transmission
  • Bulk wholesale  Foundry Networks  E1MG-100FX-IR  fiber transceiver, industrial grade 155Mbps SFP optical transceiver with 18dB power budget for legacy SDH network upgrading
  • HYTOPTODEVICE compatible OC-3 STM-1 SFP optical transceiver
  •  Compatible OC-3 STM-1 optical transceiver module 15km SMF DDM Duplex LC from hytoptodevice
  •  Foundry Networks  E1MG-100FX-IR  compatible optical transceiver, OC-3/STM-1 IR-1 1310nm 15km single-mode LC duplex SFP optical transceiver for  Foundry Networks  carrier transmission
  • Bulk wholesale  Foundry Networks  E1MG-100FX-IR  fiber transceiver, industrial grade 155Mbps SFP optical transceiver with 18dB power budget for legacy SDH network upgrading
  • HYTOPTODEVICE compatible OC-3 STM-1 SFP optical transceiver
  •  Compatible OC-3 STM-1 optical transceiver module 15km SMF DDM Duplex LC from hytoptodevice

Foundry Networks  E1MG-100FX-IR  Fiber Transceiver | SFP 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE

High-quality Foundry Networks E1MG-100FX-IR compatible fiber transceiver, dual-purpose 100BASE-FX and OC-3/STM-1 IR-1 SFP module with 1310nm wavelength, 15km single-mode LC duplex transmission. Industrial-calibrated fiber transceiver for Foundry Networks switching and carrier transmission devices, bulk wholesale with full certifications. Support private label, custom EEPROM programming and OEM for global importers, distributors and system integrators.  
NO. Brand  Compatible P/N Remarks
1 Cisco  ONS-SI-155-I1
2 Alcatel-Lucent  3HE00035AA 
3 Avago  AFCT-5760APZ 
4 HPE  JD120A
5 Juniper  SFP-1OC3-IR
6 Foundry Networks  E1MG-100FX-IR 
Description

 Foundry Networks  E1MG-100FX-IR Compatible OC-3/STM-1 IR-1 Fiber Transceiver | SFP 1310nm 15km SMF LC Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE Foundry Networks E1MG-100FX-IR compatible fiber transceiver is a dual-purpose SFP fiber transceiver supporting both 100BASE-FX Fast Ethernet and OC-3/STM-1 IR-1 carrier transmission. Fully factory-calibrated to match official Foundry Networks industrial standards, this plug-and-play fiber transceiver delivers stable 100Mbps/155.52Mbps transmission, serving as a perfect replacement fiber transceiver for Foundry Networks enterprise switches and legacy carrier network renovation.
Adopting 1310nm FP laser and standard industrial optical indexes, this intermediate-reach fiber transceiver supports steady 15km error-free transmission over G.652/G.657 single-mode fiber. Equipped with duplex LC UPC interface and compliant with SFP MSA and industry standard protocols, the Foundry Networks E1MG-100FX-IR fiber transceiver features optional DDM monitoring, low power consumption and 7×24-hour continuous stable operation for diverse network scenarios.

Key Technical Specifications

 Foundry Networks    E1MG-100FX-IR  Vendor Name HYTOPTODEVICE
Form Factor SFP Max Data Rate 155Mbps
Wavelength 1310nm Max  Distance 15KM
Connector Duplex LC Transmitter Type FP 1310nm
Cable Type SMF Receiver Type PIN
TX Power -14~-8dBm Receiver Sensitivity < -32.0dBm
Power Consumption ≤1W Receiver Overload -8.0dBm
Protocols  MSA Compliant Operation Temperature 0 to 70°C (32 to 158°F)

Usage Guidelines & Best Practices

  • Fiber & Port Matching

    Use standard G.652.D duplex single-mode fiber (SMF) with LC-PC/UPC connectors. Multimode fiber is not supported and will fail to reach 10km. Ensure the SFP port supports 100Mbps mode before insertion.

  • Installation & Hot-Swap Rules

    Supports MSA-compliant hot-swapping. Insert/remove gently without powering down the device. Keep dust caps on unused LC ports and avoid frequent re-plugging.

  • Link Loss Budget

    Offers a 18dB link budget for 15km reach (including connectors/splices). If link flapping occurs, inspect and clean optical interfaces.

  • Operating Environment

    Commercial grade: 0°C to 70°C in indoor environments. Keep away from extreme heat, moisture, and dust for long-term stability.

  • Real-Time Monitoring (DDM)

    Use integrated SFF-8472 DDM to monitor Tx/Rx power, temperature, and voltage in real time to prevent sudden outages.

  • Bulk Deployment

    Standardize fiber types and port settings across enterprise LAN or ISP deployments for consistent performance.


Full Compatibility List & Supported Network Hardware

1. Supported Hardware & Firmware
This HYTOPTODEVICE E1MG-100FX-IR fiber transceiver is fully calibrated for native Foundry Networks equipment, supporting zero-alarm plug-and-play recognition. It matches the original module’s identification protocol and optical parameters perfectly, requiring no firmware changes or complex configuration, ideal for Foundry Networks switch replacement, network maintenance and capacity expansion.
  • Full Parameter Matching: Strictly consistent with official E1MG-100FX-IR fiber transceiver electrical and optical indexes
  • Zero-Alarm Operation: No unrecognized module prompts or system error logs during hot-swap deployment
  • Dual Protocol Adaptation: Supports both Foundry 100BASE-FX Ethernet and IR-1 carrier transmission modes

2. Multi-Brand Cross Compatibility

This OC-3 STM-1 IR-1 optical transceiver complies with universal MSA standards for stable multi-brand interoperation. Custom firmware is available for mixed-vendor network SFP Module bulk deployment and procurement

3. Free Value-Added Services

We offer exclusive free value-added services for all  sfp modules  to reduce your project deployment and maintenance costs.
  • Custom firmware for multi-device compatibility
  • Free sample testing before bulk orders
  • Complete test reports for project acceptance
  • Strict batch consistency quality control
  • Cost-effective wholesale for large-scale deployment
  • Free custom EEPROM programming for special and legacy network environments

Primary Application Scenarios

  • Enterprise Fast Ethernet Networking: 100BASE-FX medium-distance fiber interconnection for enterprise campus, park and building cross-layer network links
  • Carrier Metro Access Transmission: OC-3/STM-1 IR-1 fiber link construction for telecom operator SDH/SONET access networks
  • Foundry Networks Equipment Maintenance: Special replacement fiber transceiver for E1MG-100FX-IR module aging renewal and network fault repair
  • Industrial Stable Communication: Industrial-grade fiber transceiver for outdoor base stations, unattended equipment and harsh industrial network scenarios
Connectivity Solutions(Applications)

HYTOPTODEVICE 155Mbps fiber optic transceiver for SONET/SDH solution

The Core Feature

1. Ultra-Low Power Consumption

Engineered with advanced low-power circuitry, this oc-3/stm-1 IR-1 optical transceiver operates under 1W power dissipation. It minimizes system heat buildup in high-density chassis, reduces operational energy costs, and extends hardware lifespan without sacrificing optical performance.

Low Power oc-3/stm-1 optical Transceiver module from hytoptodevice


2.
Seamless Compatibility & Reliability

Factory-calibrated to fully match original  Foundry Networks  E1MG-100FX-IR  specifications, this optical transceiver delivers zero-alarm, plug-and-play compatibility. It ensures stable, error-free operation with no extra configuration, providing consistent and reliable link performance for long-term carrier network deployment.
HYTOPTODEVICE Zero Alarm Plug and Play oc-3/stm-1 1310nm 15km SMF optical module

3.Rigorous Testing, Uncompromising Reliability

Each OC-3/STM-1 optical module passes strict optical and digital diagnostic checks in native  Foundry Networks equipment. This comprehensive quality control process guarantees flawless interoperability, precise optical output, and long-term network stability.

HYTOPTODEVICE Wholesale OC-3/STM-1 IR-1 fiber transceiver, 155Mbps 1310nm 15km LC single-mode module for legacy SDH network upgrade


FAQ

Q1: What causes frequent link flapping on E1MG-100FX-IR fiber links?
A: Frequent link flapping on the E1MG-100FX-IR fiber transceiver is mostly triggered by unstable optical signal quality and non-standard deployment. Typical factors include contaminated fiber end faces, loose LC connector contacts, excessive total link attenuation, unstable operating temperature, and mismatched end-to-end module parameters. Regular fiber cleaning, connector reconnection and parameter calibration can effectively solve intermittent link jitter issues.

Q2: Can I connect an E1MG-100FX-IR directly to an SFP-OC3-LR module?
A: Yes, provided the optical power budget is properly managed. Because LR transmitters output higher power, you may need an optical attenuator on the receiver side of the E1MG-100FX-IR module to prevent receiver saturation or permanent damage. For long-term formal deployment, unified IR modules are recommended for stable link performance.

Q3: What are the application limitations of the E1MG-100FX-IR dual-mode fiber transceiver?
A: Though supporting both 100BASE-FX and OC-3/STM-1 transmission, this fiber transceiver has obvious scenario limitations. It only supports single-mode fiber transmission and fixed 1310nm wavelength, cannot adapt to long-haul backbone transmission or BiDi single-fiber networking. Besides, it is incompatible with Gigabit Ethernet ports, limiting its use to specific 100M and carrier transmission environments.

Q4: Why does the E1MG-100FX-IR fail to work in Gigabit SFP ports?
A: The E1MG-100FX-IR fiber transceiver is built for fixed 100Mbps Ethernet and 155Mbps carrier transmission rates, without Gigabit protocol recognition and rate adaptation functions. Gigabit SFP ports adopt different signal parsing mechanisms, resulting in unrecognized modules, link failure and system alarms. This module can only operate on matching 100BASE-FX and OC-3 dedicated ports.

Q5: How much optical loss can the E1MG-100FX-IR fiber transceiver tolerate?
A: Tailored for 15km medium-distance transmission, the E1MG-100FX-IR fiber transceiver features a rational power loss tolerance. It can resist normal attenuation generated by standard single-mode fiber transmission, connector docking and minor splicing loss within the 15km transmission range. Controlling total link loss within the standard tolerance range ensures zero-bit-error long-term transmission.

Q6: Is multimode fiber usable with E1MG-100FX-IR modules for short-distance links?
A: It is not recommended and cannot work stably. The 1310nm working wavelength of the E1MG-100FX-IR fiber transceiver produces huge dispersion and ultra-high attenuation on multimode fiber. Even for short-distance links, it will cause serious signal distortion, packet loss and link disconnection. This module must use G.652/G.657 single-mode fiber for normal operation.

Q7: How to choose the right E1MG-100FX-IR temperature grade for deployment?
A: Two temperature grades are available for this fiber transceiver for differentiated scenarios. The commercial-grade model suits constant-temperature indoor machine room environments with stable 0°C~70°C working conditions. The industrial-grade version is customized for outdoor base stations, field equipment and harsh industrial sites, supporting -40°C~85°C ultra-wide temperature fluctuation to guarantee uninterrupted communication.

Q8: What causes unrecognized module errors on Foundry Networks devices?
A: Unrecognized SFP errors mainly come from incomplete module vendor coding, port protocol mismatch or device slot faults. Ordinary generic fiber transceivers lack complete Foundry Networks adaptive identification data. HYTOPTODEVICE E1MG-100FX-IR modules are fully pre-calibrated with complete proprietary identification codes to ensure seamless recognition and zero-alarm operation on original equipment.

Q9: What does high Tx bias current mean for E1MG-100FX-IR modules?
A: High Tx bias current is an early warning of abnormal laser working status. It usually occurs when the laser chip ages, the equipment dissipates heat poorly, or the link exceeds the rated transmission distance. Sustained over-standard bias current will accelerate module aging and cause sudden link breakdown. Timely troubleshooting of ambient environment and link distance or module replacement is required.

Q10: Why can’t E1MG-100FX-IR support single-strand BiDi networking?
A: The E1MG-100FX-IR fiber transceiver adopts a traditional dual-fiber duplex design, with both transmitting and receiving ends using a fixed 1310nm wavelength. BiDi networking requires wavelength division multiplexing with separate Tx/Rx wavelengths on a single fiber. Without wavelength splitting and combining functions, this dual-fiber module cannot adapt to any single-strand bidirectional transmission scenarios.

Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order

“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
hytoptodevice 100g qsfp28 sr4 replacement
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center

Others
HYTOPTODEVICE 100G QSFP28 TRANSCEIVER sr4 application for data center,ethernet

 



 

 

 

  •  Foundry Networks  E1MG-100FX-IR  compatible optical transceiver, OC-3/STM-1 IR-1 1310nm 15km single-mode LC duplex SFP optical transceiver for  Foundry Networks  carrier transmission
  • Bulk wholesale  Foundry Networks  E1MG-100FX-IR  fiber transceiver, industrial grade 155Mbps SFP optical transceiver with 18dB power budget for legacy SDH network upgrading
  • HYTOPTODEVICE compatible OC-3 STM-1 SFP optical transceiver
  •  Compatible OC-3 STM-1 optical transceiver module 15km SMF DDM Duplex LC from hytoptodevice

Download