Dell CBL-10GSFP-DAC-1M Compatible Passive SFP+ Cable 1m | 10GBASE-CU Copper Twinax Bulk Wholesale | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE is a professional passive sfp+ cable supplier, offering this Dell CBL-10GSFP-DAC-1M compatible 1m 10GBASE-CU SFP+ to SFP+ passive twinax DAC cable. This passive copper twinax cable features ultra-low power consumption and low latency, manufactured in accordance with MSA and SFF-8431 standards. It is designed for short in-rack stacking, server and storage interconnection for Dell data center switches, powerconnect and networking fabrics. Every cable undergoes strict continuity and signal integrity testing before shipment. We support sample validation, custom EEPROM programming, OEM private labeling, fast global shipping and bulk wholesale orders with flexible MOQ for data center integrators, network distributors and global buyers.
Key Technical Specifications
| Dell Force 10 Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
1m (3.3ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Dell Hardware & Firmware
● Dell S5000 / S5148 / S6000 series 10G data center switches
● Dell PowerConnect 8100 series switches
● Dell PowerEdge servers with 10G SFP+ NIC
● Dell EMC storage networking platforms
● Dell OS10 / OS9 operating system
Minimum supported firmware: OS10 10.5 and above
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this product from our passive sfp+ cable supplier supports mixed-vendor networking hardware. It interoperates smoothly with Cisco, Arista, H3C, Juniper, NVIDIA/Mellanox and other mainstream 10G SFP+ switches and NICs, suitable for mixed-brand rack stacking and network fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Dell Force10 ToR switch to server 10G rack trunk uplink• Intra-rack Dell Force10 switch stacking interconnection• Leaf-spine fabric short-distance interconnection• Virtualization cluster and storage fabric interconnection• Bulk inventory sourcing for Dell data center contractors and integrators
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the SFP+ 10G DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive SFP+ 10G DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every passive sfp+ cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Is HYTOPTODEVICE CBL-10GSFP-DAC-1M fully plug-and-play for original Dell Force10 switches?
A: Yes, we program Force10-specific EEPROM data on both ends of passive DAC, directly hot plug without firmware modification or compatibility warning on official Force10 equipment.
Q2: What is the core difference between passive & active CBL-10GSFP-DAC-1M equivalent DAC?
A: Our 1m passive sfp+ cable is passive twinax same as original CBL-10GSFP-DAC-1M with zero power draw & lower cost; active DAC is only needed for Dell links over 5-meter distance.
Q3: What’s the valid deployment distance for 1M CBL-10GSFP-DAC-1M passive DAC?
A: Fixed physical length 1 meter, designed exclusively for in-cabinet ≤1m short-distance connection; HYTOPTODEVICE stocks 0.5m/2m/3m alternative passive DAC for different rack layout needs.
Q4: Can I connect non-Dell Force10 switches & generic SFP+ server NIC with this DAC?
A: Sure, compliant with global SFP+ MSA standard, works with all SFP+ interface NIC, Cisco/Huawei/Juniper/H3C enterprise switches beyond Dell Force10 lineup.
Q5: What cost advantage to pick HYTOPTODEVICE replacement DAC vs genuine Dell Force10 OEM cable?
A: Identical plug compatibility & industrial performance, 35%~55% lower purchasing cost, in-stock fast global shipment, 5-year factory warranty and dedicated after-sales technical support from our factory.
Q6: Is hot swap available on powered-on Force10 switches for this passive DAC?
A: Supported hot-plug design per SFP+ specification, safely plug/unplug cables while network devices keep running without equipment crash or port down.
Q7: What’s power consumption of CBL-10GSFP-DAC-1M passive twinax DAC?
A: Ultra-low power draw below 0.1W per end, nearly zero power consumption comparing with optical transceivers & active DAC, ideal for energy-saving data center construction。
Q8: Working temperature range for industrial IDC cabinet environment?
A: Standard commercial grade: 0℃ ~70℃; customized wide-temperature passive DAC available for non-air-conditioned harsh cabinet environment upon bulk order.
Q9: Does HYTOPTODEVICE provide OEM private label & customized packaging for distributors?
A: We support custom cable marking, private brand packaging and EEPROM personalization, flexible MOQ to meet global reseller & distributor OEM demand.
Q10: What warranty policy for HYTOPTODEVICE Force10 compatible passive DAC?
A: Standard 3-year factory warranty for all in-stock CBL-10GSFP-DAC-1M series; free replacement for defective items under normal installation & usage condition.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

