Dell Force10 CBL-10GSFP-DAC-0.5M Compatible SFP+ to SFP+ Direct Attach Copper 50cm Wholesale | 10GBASE-CU Passive Twinax | HYTOPTODEVICE
Product Overview
HYTOPTODEVICE is a professional direct attach copper manufacture, supplying this Dell Force10 CBL-10GSFP-DAC-0.5M compatible 50cm 10GBASE-CU SFP+ to SFP+ passive twinax DAC cable. This passive direct attach copper cable features ultra-low power consumption and low latency, manufactured following MSA and SFF-8431 standards. It is designed for short in-rack interconnection between Dell Force10 switches, Dell PowerEdge servers and storage appliances. Every cable passes strict continuity and signal integrity testing before shipment. We support sample validation, custom EEPROM programming, OEM private labeling, fast global shipping and bulk wholesale orders with flexible MOQ for network integrators, data center contractors and global buyers.
Key Technical Specifications
| Dell Force10 Compatible |
|
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP+ to SFP+ |
Max Data Rate |
10Gbps |
| Cable Length |
0.5m (1.6ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.1W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
1x InfiniBand QDR, DDR, SDR, 10G Ethernet, Fibre Channel |
| Minimum Bend Radius |
23mm |
Application |
10G Ethernet |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP+ port must enable 10GBASE-CU mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 23mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP+ 10G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Dell Hardware & Firmware
● Dell Force10 S4810 / S4820T data center switches
● Dell Force10 S5000 / S6000 series 10G switches
● Dell Force10 Z9000 high-density spine switches
● Dell PowerEdge rack servers with SFP+ 10G NIC ports
● Dell Force10 FTOS operating system fabrics
Minimum supported firmware: FTOS 9.7 and above
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this direct attach copper manufacture product supports mixed-vendor networking hardware. It interoperates smoothly with Cisco, Arista, H3C, Juniper, HPE, NVIDIA/Mellanox and other mainstream 10G SFP+ switches and NICs, suitable for mixed-brand rack stacking and network fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
• Dell Force10 FTOS switch intra-rack stacking links
• ToR switch to server low-latency 10G uplink
• Virtualization cluster and storage fabric interconnection
• Cost-effective short 10G links replacing fiber patch cords
• Bulk inventory sourcing for data center contractors and distributors
Connectivity Solutions(Applications)
1. 10G to 10G Direct Link for Switch-Switch
2. 10G to 10G Direct Link for Switch-NIC
3. Leaf-spine Architecture

The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the SFP+ 10G DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The passive SFP+ 10G DAC draws near-zero power, reducing heat and energy costs in dense racks, while delivering a cost-effective, low-latency 10G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP+ passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Will this Dell Force10 twinax DAC run smoothly on other vendor 10G SFP+ switch ports?
A: Yes, it supports cross-vendor 10GBASE-CU SFP+ ports. HYTOPTODEVICE pre-codes EEPROM and validates on target hardware. Test samples first for locked switch firmware.
Q2: Can I rewrite the EEPROM ID if I migrate from Force10 switches to another brand later?
A: Yes, EEPROM reprogramming is supported. HYTOPTODEVICE provides optional coding tools and free lifetime technical support for signature modification.
Q3: How does conductor AWG size impact signal quality on short 10G Force10 stacking DAC?
A: AWG stands for copper conductor thickness. This 50cm Force10 DAC uses 30AWG. Thin gauge brings great flexibility for tight rack routing, thicker 24AWG cuts attenuation for longer DAC runs.
Q4: What bending specification must I follow for this 10G Force10 twinax DAC?
A: Follow the 20mm minimum bend radius. The standard minimum bend radius is typically 5 times the outer cable diameter. Bending lower than this can deform the internal twinax structure and cause bit errors.
Q5: Is there obvious power consumption difference between passive twinax DAC and signal-boost active DAC?
A: Yes, active DAC consumes extra power for signal amplification. Our passive 10G DAC draws less than 0.1W. It helps reduce power draw for high-density Force10 switch stacks.
Q6: Why select passive twinax DAC instead of AOC for short Force10 stacking connections?
A: Passive DAC delivers better latency and lower cost for links under 7 meters. HYTOPTODEVICE twinax DAC has no optical chips, perfect for fixed short-distance FTOS switch stacking.
Q7: Does CBL-10GSFP-DAC-0.5M passive twinax DAC support DDM/DOM real-time parameter tracking?
A: No, passive DAC has no DDM monitoring circuit; only basic PN, length and speed data are stored in EEPROM for module identification. Reach out to our direct attach copper manufacture team if you need active 10G SFP+ DAC with full DOM function.
Q8: What fixed physical length of this Dell Force10 replacement DAC for short rack cabling?
A: Standard factory fixed length is 50cm, built exclusively for ultra-short in-rack wiring for Dell Force10 switch deployments. Our direct attach copper manufacture also supplies 0.3M, 1M, 2M and 3M alternative DAC lengths upon bulk order request with fast global shipping.
Q9: Can HYTOPTODEVICE CBL-10GSFP-DAC-0.5M DAC work with non-Dell SFP+ switches and third-party server HBAs?
A: Absolutely, full SFP+ MSA compliance ensures compatibility with all SFP+ interface switches and adapters from mainstream network vendors. It is a versatile 10GBASE-CU copper cable for multi-vendor data center fabric deployment.
Q10: Is FEC feature required to maintain stable 10GBASE-CU DAC links on Dell Force10?
A: FEC is not required for passive 10GBASE-CU DAC. FEC is built for long-reach optical links. Disable FEC to skip extra processing overhead on Force10 stacking ports.
Q11: Can long-time high cabinet temperature shorten the usable lifespan of twinax DAC cables?
A: Yes, sustained high heat speeds up jacket and copper aging. HYTOPTODEVICE DACs pass thermal cycle testing. It supports reliable 24/7 operation inside warm data center cabinets.
Q12: What practical differences separate PVC and LSZH cable jackets for Force10 data center deployments?
A: PVC fits regular indoor racks at lower procurement cost. LSZH releases minimal smoke and zero halogens in fire. HYTOPTODEVICE offers both jacket choices for bulk Force10 DAC orders.
Q13: Will frequent plug and unplug wear the SFP+ contacts or port cages on Dell Force10 switches?
A: Repeated hot-plugging slowly wears gold plating on contacts. HYTOPTODEVICE DAC uses premium gold-plated contacts. It extends plug cycles for regular Force10 fabric reconfiguration.
Q14: Can I insert this 10G SFP+ DAC into a 25G SFP28 uplink port on modern switches?
A: It may negotiate down to 10G speed. Final performance depends on switch firmware. Complete sample verification before large-scale SFP28 uplink deployment.
Q15: Can I use this 10G DAC together with breakout adapters on a 40G QSFP+ port?
A: Native 40G operation is not supported. This DAC only transmits 10G signal. Confirm breakout adapter and switch compatibility with the HYTOPTODEVICE technical team in advance.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

