Dell DAC-SFP-25G-2M Compatible 25G SFP28 Passive DAC Cable 2m | HYTOPTODEVICE
Product Overview
The HYTOPTODEVICE DAC-SFP-25G-2M is a high-fidelity Dell compatible 25G SFP28 Passive Direct Attach Copper (DAC) cable. Providing a 2-meter (6.6 ft) reach, this 25g sfp28 dac cable is the ideal interconnect for linking high-density Dell PowerEdge servers to Dell Networking leaf switches without the cost or power consumption of optical transceivers.Data centers running Dell SmartFabric Services or OS10 require validated hardware for seamless automation. HYTOPTODEVICE leverages high-quality shielded twinaxial copper specifically tuned for 25Gbps NRZ signaling. This 2m solution is flashed with Dell-specific EEPROM signatures, ensuring it is recognized natively as DAC-SFP-25G-2M. This eliminates "unqualified SFP" warnings and ensures 100% "Plug-and-Play" operation across PowerSwitch S5200, S5100, and Z-Series platforms.
Key Product Parameters
| Dell Compatible |
DAC-SFP-25G-2M |
Vendor Name |
HYTOPTODEVICE |
| Connector |
SFP28 to SFP28 |
Max Data Rate |
25Gbps |
| Cable Length |
2m (7ft) |
Wire AWG |
AWG 30 |
| Cable Type |
Passive Twinax |
Power Consumption |
≤0.5W |
| Media |
Copper |
Operation Temperature |
0~ 70 °C (32 to 158°F) |
| Jacket Material |
PVC(OFNR) |
Protocols |
IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius |
25mm |
Application |
25G Ethernet, Data Center, 5G Wireless |
For detailed technical specifications, please refer to the Datasheet
Usage Guidelines & Best Practices
-
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
-
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
-
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
-
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
- Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
1. Validated Dell Hardware & Firmware
The HYTOPTODEVICE DAC-SFP-25G-2M dac sfp28 25g is 100% verified for:
-
Dell PowerSwitch (Networking): S5048F-ON, S5148F-ON, S5212F-ON, S5224F-ON, S5248F-ON, S5296F-ON, and Z9264F-ON.
-
Dell PowerEdge Servers: R640, R740, R650, R750, R660, R760 (with 25G SFP28 LOM or Mezzanine cards).
-
Dell Precision & XE Series: High-performance workstations and AI-optimized servers (XE8545, XE9680).
-
Dell Storage: PowerStore, PowerScale (Isilon), and Unity XT arrays with 25G SFP28 frontend ports.
-
Operating Systems: Fully supported in Dell OS10, SONiC, and OPX.
2. Multi-Brand Cross Interoperability
Built on universal MSA open standards, this 25G SFP28 Passive DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.
3. Free Value-Added Services
-
Custom firmware for multi-device compatibility
-
Support sample testing before bulk orders for project pre-verification
-
Private-label customization and professional deployment guidanc
-
Strict batch consistency quality control
- Free custom EEPROM programming for special and legacy network environments
- Free EEPROM rewriting (Tools Included) with 24/7 Tech Support
Primary Application Scenarios
-
PowerEdge to PowerSwitch Connectivity: The 2m length is perfect for connecting servers at the bottom of a 42U rack to a Dell S5248F-ON switch at the top.
-
Dell SmartFabric Deployments: Providing a reliable, zero-latency physical link for automated leaf-spine fabrics.
-
Hyper-Converged Infrastructure (HCI): Optimized for Dell VxRail nodes requiring high-speed 25Gbps backplane connectivity.
-
Low-Latency Storage Paths: Linking Dell PowerStore arrays to the fabric for NVMe-over-Fabrics (NVMe-oF) workloads.
Connectivity Solutions(Applications)
1. 25G to 25G Direct Link for Switch-Switch
2. 25G to 25G Direct Link for Switch-NIC
The Core Feature
1. Cost-Effective Ultra-Short Connectivity
Using twinax copper, the 25gb SFP28 Passive DAC replaces a fiber pair and two optical transceivers, significantly cutting interconnect cost for short-reach links — plug-and-play, no modules required.

2. Ultra-Low Power, Maximum Energy Efficiency
The 25g SFP28 passive DAC cable draws lower power consumption, reducing heat and energy costs in dense racks, while delivering a cost-effective, high-speed and low-latency 25G link for short-reach connections — within a rack or across adjacent racks.

3.Host-Device Tested for Proven Interoperability
Every SFP28 passive twinax copper cable is rigorously tested for compatibility in the target switch environment, so you can deploy with confidence — no surprises, no downtime. Not sure it fits?
Compatibility Video available upon request.
4. 100% Individually Tested for Peak Performance
Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our
Test Center.

FAQ
Q1: Can this Dell compatible passive dac cable lock stable full 25G rate on Dell OS10 switches?
A: Yes, this HYTOPTODEVICE passive dac cable supports full 25.78125Gbps line rate. It is pre-flashed with Dell EEPROM profile and validated under OS10 for reliable 25GBASE-CR links, no FEC required for 2m length.
Q2: What is the maximum supported transmission distance for this 25G SFP28 passive dac cable standard?
A: The rated maximum reach of 25G SFP28 passive dac cable is 5 meters. This 2m cable stays safely within the copper loss budget for Dell same-rack deployments.
Q3: Does this passive dac cable support cross-brand links between Dell PowerSwitch and Intel or NVIDIA NIC?
A: Cross-brand interconnection works well with unified 25GBASE-CR and aligned FEC parameters. This passive dac cable follows MSA specs for multi-vendor Dell-based data center fabrics.
Q4: What is the key difference between SFP28 and SFP+ form factor for passive dac cable?
A: SFP28 form factor supports up to 25G signaling, while SFP+ only tops at 10G. This passive dac cable uses SFP28 housing to match modern Dell 25G server and switch ports.
Q5: What kind of link failure will happen if this passive dac cable runs beyond the 5-meter limit?
A: 25G twinax copper suffers severe signal attenuation over long runs. Length exceeding 5m triggers CRC errors and unstable link flapping; longer links require fiber optics.
Q6: Which workloads gain the most latency advantage using this passive dac cable on Dell PowerEdge servers?
A: NVMe storage, HPC computing and virtualization clusters get the largest benefit. This HYTOPTODEVICE passive dac cable delivers consistent low latency for these Dell workloads.
Q7: Can this 2m passive dac cable be deployed as direct point-to-point links between two Dell PowerEdge servers?
A: Direct server-to-server interconnection is fully supported after correct port configuration. This passive dac cable fits storage replication and cluster sync traffic inside a single rack.
Q8: How does AWG wire gauge affect signal performance for 2m passive dac cable deployments?
A: 30AWG provides better flexibility for 2m runs; 26AWG reserves lower insertion loss for cables close to 5m. This unit uses 30AWG twinax optimized for Dell rack routing.
Q9: Will Dell OS10 firmware upgrades break recognition of this passive dac cable?
A: MSA-compliant passive dac cable maintains compatibility through regular OS10 firmware updates. The preloaded Dell EEPROM profile remains recognized on mainstream stable releases.
Q10: When should you select AOC fiber cable instead of passive dac cable in Dell data center builds?
A: Pick active optical cables when links cross racks or exceed 5 meters. Passive dac cable remains zero-power, low-cost choice for short intra-rack 25G connections.
Q11: How much latency reduction can passive dac cable bring compared with fiber optical links on Dell HPC clusters?
A: Passive dac cable cuts roughly 30–60ns latency by removing optical-electrical conversion. This reduction matters for latency-sensitive computing and storage applications.
Q12: Can this SFP28 passive dac cable negotiate 25G speed when inserted into legacy SFP+ 10G ports on Dell hardware?
A: 25G negotiation is impossible on SFP+ ports due to different electrical specifications. Both ends must have native SFP28 ports to run this passive dac cable at full 25G.
Q13: Can QSFP28 breakout 4×25G DAC replace this SFP28 point-to-point passive dac cable on Dell SFP28 ports?
A: Breakout DAC uses unique pin mapping and split logic. It cannot substitute this standard SFP28 to SFP28 passive dac cable.
Q14: What compatibility verification tests does HYTOPTODEVICE run for this Dell passive dac cable before shipment?
A: Each batch carries BER scanning, link-up and hot-swap validation on Dell PowerSwitch OS10 hardware. Testing confirms EEPROM detection and steady 25G performance.
Q15: What deployment limits should buyers know before bulk purchasing passive dac cable for Dell fabric?
A: Passive dac cable is designed only for short intra-rack copper links. It is not suitable for inter-row or long-distance cross-facility transmission.
Packaging & Custom OEM Solutions
-
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
-
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
- Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
- 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
- ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
- Ample stock, fast global DHL/FedEx shipping in 3–5 working days
- Free pre-sales engineering support for custom EEPROM & private label firmware
- Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
-
ISO 9001: Certified quality management and production consistency.
-
CE & FCC: Fully compliant for seamless Global Market Access.
-
RoHS: Committed to environmental responsibility and hazardous material control.
-
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.

Rigorous Industrial Product Testing

100% 3rd Party Compatible

Partial Test Demonstration

