| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QDD-400-CU0.5M | |
| 2 | Arista Networks | CAB-D-D-400G-0.5 | |
| 3 | Dell | DAC-Q56DD-400G-0.5M | |
| 4 | NVIDIA/Mellanox | MCP1660-W00AE30 | |
| 5 | H3C | QSFPDD-400G-D-CAB-0.5M | |
| 6 | Generic | QSFPDD-400G-CUxM |
| Dell Compatible |
DAC-Q56DD-400G-0.5M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP-DD to QSFP-DD | Max Data Rate | 400Gbps |
| Cable Length | 0.5m (1.67ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3cd, QSFP-DD MSA, CMIS 4.0 |
| Minimum Bend Radius | 35mm | Application | 400G Ethernet and InfiniBand EDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP-DD port must enable 400GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.sharp bends degrade 400G PAM4 signals and trigger link errors.
Port Installation Standard: Works only with standard QSFP-DD 400G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 400G QSFP-DD passive direct attach copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.







Q1: Can this Dell-compatible 400G QSFP-DD DAC run smoothly on multi-brand network switches? A1: It depends on EEPROM coding. HYTOPTODEVICE passive direct attach copper twinax cable supports single-vendor or dual-vendor programming. With matched coding, it achieves plug-and-play connectivity on Cisco, Arista, Dell and other MSA-compliant QSFP-DD switches.
Q2: Is a QSFP-DD cable backward compatible with older QSFP28 (100G) or QSFP56 (200G) ports? A2: Physically, QSFP-DD ports are designed to accept older QSFP28 or QSFP56 modules with certain physical and software limitations. However, this 400G QSFP-DD DAC cannot operate when inserted into legacy 100G/200G ports because of mismatched form factor and electrical lane definition.
Q3: Will choosing third-party 400G direct attach copper cables void my network hardware warranty? A3: It will not automatically void your switch warranty. Our HYTOPTODEVICE passive direct attach copper twinax cable follows MSA and IEEE 802.3ck standards. Vendors only reject warranty claims when cable defects directly cause permanent port damage.
Q4: Can I connect different brands of network interface cards (NICs) on each end of the cable? A4: Yes, provided each end is correctly coded or compatible with the respective hardware requirements of the connected servers or switches. HYTOPTODEVICE offers dual-sided custom EEPROM coding service to support mixed-brand NIC interconnection for bulk deployments.
Q5: Does this 400G QSFP-DD twinax cable support standard Ethernet auto-negotiation functions? A5: Yes. This HYTOPTODEVICE passive direct attach copper twinax cable supports IEEE auto-negotiation. The negotiation function is handled by the switch/NIC firmware, not the passive cable itself.
Q6: What is the maximum operating distance supported by our passive 400G QSFP-DD copper twinax solution? A6: Our maximum supported length for passive 400G QSFP-DD copper twinax is 3 meters. HYTOPTODEVICE supplies 0.5m, 1m, 2m and 3m variants; passive copper cannot maintain 400G PAM4 signal integrity beyond 3m.
Q7: How big is the latency gap between 400G DAC copper twinax and fiber optic links? A7: 400G DAC copper latency is lower than fiber. Light travels slower in glass than electrical signals in copper, and DAC removes transceiver chip delay. HYTOPTODEVICE passive direct attach copper twinax cable delivers ultra-low latency ideal for AI cluster workloads.
Q8: What wire gauge (AWG) is typically used in 400G QSFP-DD cables? A8: Short lengths including 0.5m and 1m use 30AWG for better flexibility. 2m and 3m versions adopt 28AWG to minimize signal attenuation. HYTOPTODEVICE matches the proper AWG for every length to stabilize 400G PAM4 signal transmission.
Q9: Are these 400G DAC twinax cables capable of continuous full line-rate transmission without packet loss? A9: Yes, within rated length and proper operating conditions. Every HYTOPTODEVICE passive direct attach copper twinax cable passes line-rate burn-in testing, supporting continuous 400G line-rate traffic with zero packet loss.
Q10: Can this QSFP-DD DAC cable work for both Ethernet and InfiniBand NDR networking environments? A10: It depends on EEPROM and host configuration. Our HYTOPTODEVICE 400G QSFP-DD DAC can be coded for Ethernet or InfiniBand NDR; please specify your required mode when placing bulk orders.
Q11: What pull-tab design is adopted on the QSFP-DD connectors of these copper twinax cables? A11: They use standard bail-clasp pull-tab latches. This is the mainstream design for HYTOPTODEVICE QSFP-DD cables, allowing easy, tool-free insertion and removal without damaging ports or connectors.
Q12: Is it acceptable to deploy this 400G copper DAC for inter-rack connections across the data center? A12: Not recommended for most cross-rack deployments. Our passive 400G twinax max reach is 3m, which is only suitable for adjacent racks. Longer cross-rack links require 400G AOC fiber cables instead.
Q13: What jacket color selections are available for bulk orders of this 400G QSFP-DD DAC cable? A13: Standard jacket color is black. HYTOPTODEVICE also supports custom jacket colors for bulk OEM orders, you can submit color requirements together with your EEPROM coding request before production.
Q14: What troubles may occur if the QSFP-DD connector is improperly seated and the link cannot come up? A14: The link will not establish and the switch may log link-down errors. Check proper seating, verify EEPROM coding matches your hardware, and inspect for over-bending. HYTOPTODEVICE technical team helps troubleshoot link-up issues.
Q15: Why is the pricing of 400G DAC twinax cables much more competitive than 400G optical transceiver modules? A15: Passive DAC has no optical chips, lasers or photodiodes. HYTOPTODEVICE passive direct attach copper twinax cable uses only copper and shielding materials, cutting component cost compared to optical transceiver modules.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




