| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | Q56-200-CU1M | |
| 2 | Arista Networks | CAB-Q56-Q56-1M | |
| 3 | Dell | DAC-Q56-200G-1M | |
| 4 | NVIDIA/Mellanox | MCP1650-V001E30 | |
| 5 | H3C | QSFP56-200G-D-DAC-1M | |
| 6 | Huawei | QSFP-200G-CU1M | |
| 7 | Generic | QSFP56-200G-CUxM |
| Dell Compatible |
DAC-Q56-200G-1M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP56 to QSFP56 | Max Data Rate | 200Gbps |
| Cable Length | 1m (3ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE802.3cd, SFF-8436 |
| Minimum Bend Radius | 35mm | Application | 200G Ethernet and InfiniBand HDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP56 port must enable 200GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP56 200G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 200G QSFP56 passive direct attach copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Do I need special lane splitting configuration on Dell OS10 to bring up this 200G QSFP56 DAC link? A1: No lane splitting configuration is needed. This is a straight 200G QSFP56 to QSFP56 passive DAC rather than a breakout cable. HYTOPTODEVICE loads Dell-compatible EEPROM to enable direct 200G link negotiation between two QSFP56 ports.
Q2: Can this Dell compatible 200G twinax cable create a valid link between a 200G port and 50G server NIC? A2: No, this passive direct attach copper twinax cable cannot interoperate with standalone 50G NICs. Its electrical layout and EEPROM are calibrated exclusively for 200G PAM4 signaling, and a stable link will not establish.
Q3: What details should I submit during order placement to get correct Dell-specific coding? A3: Please share your Dell switch model and target OS10 firmware version before shipment. HYTOPTODEVICE will flash matched EEPROM data to guarantee plug-and-play and eliminate port error alerts.
Q4: Will installing third-party passive DAC cables void the original hardware warranty of my Dell PowerSwitch? A4: It will not automatically void your switch warranty. MSA-compliant passive DACs like HYTOPTODEVICE 200G twinax cables follow industry specifications; you can confirm detailed warranty terms with your Dell vendor.
Q5: Can link auto-negotiation work out of the box immediately after plugging this Dell DAC? A5: Auto-negotiation performance depends on the OS10 firmware and NIC firmware. The cable itself does not block negotiation, while accurate Dell vendor coding from HYTOPTODEVICE is critical for stable auto-negotiation.
Q6: What total throughput can this straight QSFP56-to-QSFP56 DAC deliver between two Dell switch ports? A6: This non-breakout 200G DAC delivers aggregate 200Gbps bandwidth. It uses four independent 50G PAM4 lanes to build a full-rate 200GBASE-CR4 point-to-point link between paired QSFP56 ports.
Q7: What is the maximum reliable working distance for passive 200G copper twinax DACs? A7: Passive 200G DAC cables are limited to short distances due to high-frequency signal attenuation from PAM4 modulation, typically ranging from 0.5m to 3m. HYTOPTODEVICE strictly controls signal integrity to deliver stable links within this working range.
Q8: Why do low-latency AI and HPC clusters prefer 200G passive DAC over fiber links? A8: 200G passive DAC delivers lower latency than fiber. Copper twinax removes optical transceiver conversion delay, making HYTOPTODEVICE 200G DAC ideal for low-latency AI and HPC cluster workloads.
Q9: What AWG sizes are commonly used for 200G passive twinax cables from networking cable manufacturers? A9: They commonly adopt 26AWG or 30AWG conductors. Thinner 30AWG delivers greater flexibility for tight routing, while thicker 26AWG is deployed to support the maximum passive reach for 200G PAM4 signals. HYTOPTODEVICE matches the AWG spec by cable length for optimized performance.
Q10: Are 200G PAM4 signals more prone to electromagnetic interference than legacy 100G NRZ signals? A10: Yes, PAM4 signals are more susceptible to EMI. HYTOPTODEVICE’s twinax cables use full foil and braided shielding to suppress crosstalk and EMI and maintain stable signal integrity.
Q11: Can this Dell compatible 200G DAC run continuous full line-rate traffic without packet loss? A11: Yes, it supports sustained full line-rate traffic without packet loss. Every HYTOPTODEVICE 200G twinax cable passes insertion loss, return loss and eye diagram testing before delivery.
Q12: How does the bending flexibility of 200G twinax cable compare with older 100G DAC cables? A12: 200G twinax cables are slightly stiffer than 100G NRZ DAC variants. Denser internal wiring and enhanced shielding requirements create this difference, so users must closely follow minimum bend radius guidelines during installation.
Q13: Is this passive twinax DAC suitable for cabling across separate server racks? A13: No. Because passive copper DACs are restricted to very short distances (usually max 3 meters), they are strictly intended for intra-rack use. Cross-rack deployment will trigger severe signal attenuation and unstable links.
Q14: Will repeated plugging and cable weight damage the QSFP56 ports on my Dell switches? A14: Properly routed, it will not cause excessive strain. We recommend cable support brackets for heavier assemblies; our pull-tab design also reduces stress when plugging and unplugging.
Q15: Am I able to customize the outer jacket color for bulk OEM orders of this 200G QSFP56 DAC? A15: Black is our standard jacket color. HYTOPTODEVICE supports custom jacket colors for bulk OEM orders, subject to minimum order quantity requirements.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




