| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | Q56-200-CU50CM | |
| 2 | Arista Networks | CAB-Q56-Q56-0.5M | |
| 3 | Dell | DAC-Q56-200G-0.5M | |
| 4 | NVIDIA/Mellanox | MCP1650-V00AE30 | |
| 5 | Generic | QSFP56-200G-CUxM |
| Dell Compatible |
DAC-Q56-200G-0.5M
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP56 to QSFP56 | Max Data Rate | 200Gbps |
| Cable Length | 0.5m (1.67ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.25W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE802.3cd, SFF-8436 |
| Minimum Bend Radius | 35mm | Application | 200G Ethernet and InfiniBand HDR |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP56 port must enable 200GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP56 200G ports; cannot be inserted into QSFP+ or SFP28 slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 200G QSFP56 passive copper twinax cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and more, for mixed-vendor rack stacking and server fabric expansion.






Q1: Will this 200G breakout cable work with my Cisco, Arista, or Juniper switches? A1: This straight 200G QSFP56 DAC cable works on MSA-compliant QSFP56 ports of Cisco, Arista and Juniper switches. HYTOPTODEVICE pre-writes matched EEPROM for Dell OS10, delivering stable cross-brand interoperability for your multi-vendor data center fabric.
Q2: Is this 200G QSFP56 cable backward compatible with older 40G or 100G QSFP ports? A2: It is not natively backward compatible. QSFP56 uses 50G PAM4 per lane while QSFP+/QSFP28 use NRZ signaling, and electrical pinout differs. You may reconfigure port speed only if your Dell switch hardware supports rate adaptation.
Q3: Will using a third-party DAC cable void my network hardware manufacturer's warranty? A3: Properly qualified third-party DAC cables generally do not void OEM hardware warranty. All HYTOPTODEVICE 200G QSFP56 twinax cables pass strict signal tests and follow MSA standards to reduce compatibility risks for Dell PowerSwitch deployments.
Q4: Will this cable support standard Digital Diagnostic Monitoring (DDM/DOM)? A4: Yes, this Dell compatible 200G QSFP56 DAC supports standard DDM/DOM readout. The pre-programmed EEPROM reserves DDM registers, letting you monitor link status directly on Dell OS10.
Q5: Are these cables compliant with industry standards? A5: Yes, our 200G QSFP56 passive copper twinax cables comply with MSA, IEEE 802.3cd, RoHS and REACH. HYTOPTODEVICE runs batch verification to keep every shipment aligned with global data center cabling requirements.
Q6: What modulation technology does a 200G QSFP56 DAC cable use? A6: It adopts PAM4 4-level pulse amplitude modulation. This HYTOPTODEVICE 200GBASE-CR4 cable aggregates four 50G PAM4 lanes to hit 200Gbps, offering higher bandwidth density than traditional NRZ signaling.
Q7: What is the maximum recommended cable length for passive 200G copper twinax cables? A7: The reliable maximum length for passive 200GBASE-CR4 twinax is 3 meters. PAM4 has tighter signal margin, so we supply 0.5m, 1m, 1.5m, 2m and 3m standard lengths for in-rack AI and HPC connections.
Q8: How does latency compare between 200G DAC cables and fiber optic solutions? A8: 200G passive DAC has lower latency than fiber. Copper twinax avoids optical conversion delay, making this HYTOPTODEVICE 200G QSFP56 cable ideal for low-latency AI training and high-frequency trading workloads.
Q9: What wire gauge (AWG) is typically used for 200G twinax cables? A9: 30AWG and 26AWG are common for 200G twinax. This 0.5m Dell compatible DAC uses 30AWG for superior flexibility; 26AWG is reserved for longer passive runs up to 3m with less signal attenuation.
Q10: Can this cable handle heavy, continuous line-rate data traffic without dropping packets? A10: Yes, it supports sustained line-rate 200G traffic without packet loss. Every HYTOPTODEVICE 200G QSFP56 DAC undergoes eye diagram testing to guarantee signal integrity under full load.
Q11: How flexible is a 200G copper twinax cable compared to a 100G cable? A11: 200G PAM4 twinax is slightly less tolerant of sharp bends than 100G NRZ DAC. Our 30AWG 200G cable still offers good flexibility for dense racks, but must follow the 35mm minimum bend radius rule.
Q12: What kind of latching mechanism do these connectors use? A12: These QSFP56 connectors adopt standard pull-tab latching design. The pull tab on this HYTOPTODEVICE 200G DAC enables easy, safe hot swap without damaging Dell switch ports during cabling maintenance.
Q13: Can I run this cable between two different server racks? A13: No, this 0.5m short passive twinax is designed only for in-rack links. It cannot reach across separate racks; select active optical cables (AOC) if you need inter-rack 200G connections.
Q14: What color options are available for the outer cable jacket? A14: Black is our standard jacket color for this Dell DAC-Q56-200G-0.5M compatible DAC. HYTOPTODEVICE supports custom jacket color requests for bulk orders and OEM projects.
Q15: What kind of warranty comes with these cables? A15: This 200G QSFP56 passive copper twinax cable carries our standard multi-year product warranty. HYTOPTODEVICE provides responsive RMA support for wholesale buyers and system integrators.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




