• HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • Dell 332-1365 Compatible 40G QSFP+ Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE
  • HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • Dell 332-1365 Compatible 40G QSFP+ Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

Dell 332-1365 Compatible 40G QSFP+ Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

HYTOPTODEVICE supplies bulk 40G QSFP+ Breakout Cable. This 0.5m Dell 332-1365 compatible passive twinax breakout DAC splits one 40G QSFP+ port into four independent 10G SFP+ links, pre-programmed for Dell OS10 PowerSwitch. Source factory direct 40G QSFP+ breakout cable for data center leaf-spine networking.
NO. Brand  Compatible P/N Transceiver Type
1 Cisco  QSFP-4SFP10G-CU50CM
2 Arista Networks CAB-Q-S-0.5M
3 Juniper QFX-QSFP-DACBO-50CM
4 Brocade  40G-QSFP-4SFP-C-0105 
5 Dell 332-1365
6 Intel  X4DACBL50 
7 NVIDIA/Mellanox  MC2609130-050
8 IBM  BN-QS-SP-CBL-50CM
Description

Dell 332-1365 Compatible 40G QSFP+ Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

Product Overview

HYTOPTODEVICE 0.5M 40G QSFP+ Breakout Cable is a drop-in replacement for Dell OEM part 332-1365. This passive fan-out twinax cable complies with SFF-8436 / SFF-8431 MSA standards, breaking out a single 40G QSFP+ port into four separate 10G SFP+ Ethernet lanes. It adopts zero-power passive design and supports hot swap. We preload Dell-matched EEPROM profiles to minimize unsupported-media alerts on Dell OS10 platforms. Bulk orders, sample testing and OEM private label are available for distributors, system integrators and data center contractors.

Key Technical Specifications

Dell Compatible
 332-1365
Vendor Name HYTOPTODEVICE
Connector QSFP+ to 4 x SFP+ Max Data Rate 40Gbps
Cable Length 0.5m (1.6ft) Wire AWG AWG 30
Cable Type Passive Twinax Power Consumption ≤0.5W
Media Copper Operation Temperature 0~ 70 °C (32 to 158°F)
Jacket Material PVC(OFNR) Protocols SFF-8436, SFF-8431 and QSFP+ MSA
Minimum Bend Radius 21mm Application 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel

For detailed technical specifications, please refer to the Datasheet


Usage Guidelines & Best Practices

  • Mandatory Port Breakout Configuration: Ensure the host QSFP+ port supports channelization. Enable breakout mode (4x10G) via the switch CLI before connecting the cable.

  • Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.

  • Port Installation Standard: Do not mix this breakout DAC with straight QSFP+ to QSFP+ DAC configuration.

  • Hot‑swap rule:Never pull or tug directly on the individual breakout legs. Always use the integrated pull-tab or bale latch when inserting or removing connectors.

  • Testing & Storage: Run sample validation on target hardware before large bulk deployment; store spare cables in dry, dust‑free and anti‑static packaging.
  • Operating Environment: 0‑70℃, indoor cabinet deployment only.

For detailed operation instructions, please refer to the User Guide.


Full Compatibility List & Supported Devices

1. Validated Dell Hardware & Firmware

  • Dell PowerSwitch S6000, Z9100, S5248F-ON, Z9264F-ON running OS10
  • Dell EMC N4032F, N4064F networking switches with breakout-capable QSFP+ ports
  • Dell PowerEdge embedded 40G blade switch modules

2. Multi-Brand Cross Interoperability

Built on universal MSA open standards, this 40G QSFP+ to 4 x 10G SFP+ passive breakout DAC cable can interoperate with mainstream network brands including Arista, Intel, Juniper, Dell, NVIDIA Mellanox and IBM, for mixed-vendor rack stacking and server fabric expansion.

3. Free Value-Added Services

  • Custom firmware for multi-device compatibility
  • Support sample testing before bulk orders for project pre-verification
  • Private-label customization and professional deployment guidanc
  • Strict batch consistency quality control
  • Free custom EEPROM programming for special and legacy network environments
  • Free EEPROM rewriting (Tools Included) with 24/7 Tech Support

Primary Application Scenarios 
  • 40G Dell PowerSwitch QSFP+ port breakout to four 10G server uplinks inside compact racks
  • Data center upgrade to reuse existing 10G NICs with Dell leaf switches
  • 10G iSCSI / FCoE storage fabric interconnection
  • Dell leaf-spine fabric short-distance intra-rack breakout cabling
  • Direct replacement for Dell original 332-1365 40G breakout twinax cable
  • Hyper-converged infrastructure short-range 40G-to-10G fan-out connections

Connectivity Solutions(Applications) 

1. 40G to 4x10G Breakout Link for Switch-Switch
HYTOPTODEVICE 40G QSFP+ to four 10G SFP+ passive copper breakout dac cable for switch to switch

The Core Feature

1. About 0.5W Passive Load, Near-Zero Heat

A 40G QSFP+ host fans out to four 10G SFP+ copper lines at ~0.5 W per splitter, no active components, barely any waste heat — purpose-built for close-range, in-rack and adjacent-rack interconnects.

hytoptodevice 40G QSFP+ to Four SFP+ passive  dac cable

2.Host-Device Tested for Proven Interoperability

Every splitter is link-up tested on real target switch models; ports come online on first install across major vendor gear, no field tuning or replacement loops. Not sure it fits? Compatibility Video available upon request.

hytoptodevice wholesale 40G QSFP+ to 4 sfp+ twinax cable for data center

3. 100% Individually Tested for Peak Performance

Every single unit is tested individually — no sampling, no shortcuts — to ensure optical compliance and continuous operational stability. Curious how we do it? Take a virtual tour of our Test Center.

HYTOPTODEVICE  40g QSFP+ to 4 x sfp+ passive dac cable for switches

FAQ

Q1: Will this Dell 332-1365 programmed 40G QSFP+ breakout cable trigger transceiver block alerts on Arista EOS switches? A: No, many enterprise switches enforce strict vendor lock-in. You need to select the brand-matching coded version when purchasing. HYTOPTODEVICE provides pre-coded Dell 332-1365 programmed 40G QSFP+ breakout cable to prevent warning messages or link failure.

Q2: Will OS10 firmware upgrades risk disabling this Dell 332-1365 equivalent 40G fan-out breakout DAC? A: It normally stays functional. HYTOPTODEVICE Dell 332-1365 equivalent 40G fan-out breakout DAC uses MSA standard EEPROM chips compatible with regular firmware upgrades, though rare aggressive OEM firmware revisions may block third-party media.

Q3: If I replace my Dell switches with other vendor hardware later, can I reflash the EEPROM of this 40G QSFP+ to quad 10G SFP+ breakout DAC locally? A: Yes, recoding is supported. HYTOPTODEVICE supplies dedicated EEPROM programming hardware and software for this 40G QSFP+ to quad 10G SFP+ breakout DAC. We provide simple step-by-step guides or remote technical support for easy operation.

Q4: My Dell OS10 switch shows unsupported media warning but traffic works normally, what causes this alert on this Dell 332-1365 replacement breakout cable? A: This is common on enterprise switches. The system checks vendor signatures and generates syslog alerts while forwarding traffic normally. HYTOPTODEVICE Dell 332-1365 replacement breakout cable is pre-flashed to reduce such warning logs.

Q5: Can this MSA-compliant 40G to 4×10G passive breakout twinax cable operate reliably on SONiC and Cumulus Linux whitebox switches? A: Yes, open-source network OS usually accepts standard DAC media without vendor lock restrictions. HYTOPTODEVICE validates this MSA-compliant 40G to 4×10G passive breakout twinax cable on SONiC and Cumulus platforms.

Q6: What is the maximum reliable operating length for this rack-internal 40G QSFP+ breakout direct attach copper cable? A: Our rack-internal 40G QSFP+ breakout direct attach copper cable supports a maximum reliable reach of 7 meters. Passive copper suffers high-frequency signal attenuation, designed only for short rack internal connections.

Q7: Will this ultra-short low-latency 40G breakout fan-out DAC add latency or packet drops for virtualization and HPC workloads? A: No, there is no extra latency or packet loss within rated distance. Passive copper has no signal retiming chips. This HYTOPTODEVICE ultra-short low-latency 40G breakout fan-out DAC delivers near-zero latency for local rack links.

Q8: Will tight bundling alongside power cables introduce EMI interference and signal loss for this shielded 40G QSFP+ breakout copper cable? A: EMI-related signal degradation risk exists. Copper twinax is sensitive to electrical interference. Even with full shielding on our HYTOPTODEVICE shielded 40G QSFP+ breakout copper cable, avoid tight parallel routing next to high-voltage power wires.

Q9: Is this storage-optimized 4x10G breakout DAC suitable for FCoE and iSCSI SAN deployments? A: Yes, it supports all standard layer 2 / layer 3 traffic. This HYTOPTODEVICE storage-optimized 4x10G breakout DAC is protocol-agnostic, compatible with Ethernet, FCoE, iSCSI and InfiniBand.

Q10: Can I run 9000 MTU jumbo frames end-to-end through this jumbo-frame ready 40G to four-port 10G SFP+ breakout cable? A: Yes, jumbo frames pass transparently. Passive copper does not process frame payloads. HYTOPTODEVICE jumbo-frame ready 40G to four-port 10G SFP+ breakout cable supports standard and 9000 MTU frames without fragmentation.

Q11: What typical issues lead to link down after installation of this plug-and-play 40G QSFP+ fan-out breakout cable? A: Three main root causes lead to down links: missing breakout port configuration, mismatched EEPROM coding, or loose copper contacts. Enable OS10 breakout mode before deploying the HYTOPTODEVICE plug-and-play 40G QSFP+ fan-out breakout cable.

Q12: Are the four 10G SFP+ breakout tails of this 40G twinax breakout DAC backward compatible with legacy 1G SFP Gigabit interfaces? A: No, down negotiation to 1G will not work. SFP+ hardware is built for 10Gbps operation. The SFP+ legs of this HYTOPTODEVICE 40G twinax breakout DAC cannot interoperate with 1G SFP ports.

Q13: Does this lane-marked 40G QSFP+ fan-out DAC follow universal fixed lane sequencing for its four breakout 10G ports? A: Yes, lanes follow fixed standard mapping. Each breakout leg is clearly labeled with lane ID matching the switch’s internal channel layout. HYTOPTODEVICE lane-marked 40G QSFP+ fan-out DAC simplifies on-site deployment.

Q14: Do I need fiber optic cleaning sticks to maintain the gold contact pins of this 40G QSFP+ breakout DAC? A: Optical cleaning pens are unnecessary, but contact protection matters. Never touch gold pins directly by hand, and keep connectors dust-free for stable links on this HYTOPTODEVICE gold contact 40G QSFP+ breakout DAC.

Q15: What AWG wire gauge is adopted for this compact 0.5m 40G QSFP+ breakout cable and how does gauge impact cable routing flexibility? A: This 0.5m model uses 30AWG twinax. 30AWG delivers superior flexibility while maintaining stable signal integrity for short lengths; thicker gauges offer better signal performance at longer distances but are stiffer.

Packaging & Custom OEM Solutions

  • ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.

  • Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.


Why Network Engineers Choose HYTOPTODEVICE

HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.

  • Up to 70% cost savings vs OEM, transparent pricing & flexible bulk rates, supported quality returns
  • 100% real-device compatible with Cisco, Huawei,Dell,Juniper, and Arista
  • ISO 9001:2015 Shenzhen factory, full lineup: 1.25G/10G/25G/40G/100G/200G/400G/800G/1.6T transceivers
  • Ample stock, fast global DHL/FedEx shipping in 3–5 working days
  • Free pre-sales engineering support for custom EEPROM  & private label firmware
  • Real switch test videos available for pre-purchase review; inspection & shipping videos provided per order


“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia


Quality Certification & Compliance

 At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.

We adhere to rigorous standards for our SFP modules and network solutions:

  • ISO 9001: Certified quality management and production consistency.

  • CE & FCC: Fully compliant for seamless Global Market Access.

  • RoHS: Committed to environmental responsibility and hazardous material control.

  • Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.

Certified Quality. Global Standards. Guaranteed Performance.




Rigorous Industrial Product Testing

   hytoptodevice check device and equiptment for optical transceiver module

100% 3rd Party Compatible
testing device for hytoptodevice 10g sfp+ bidi optical module
Partial Test Demonstration
hytoptodevice compatible optical transceiver module for ethernet,data center


  • HYTOPTODEVICE 40G QSFP+ to 4x10G SFP+ breakout DAC cable
  • passive 40G breakout twinax DAC CABLE from hytoptodevice
  • Bulk wholesale compatible 40G QSFP+ to 4×10G SFP+ breakout DAC from HYTOPTODEVICE
  • Dell 332-1365 Compatible 40G QSFP+ Breakout Cable 0.5m(1.6ft) Bulk Wholesale | HYTOPTODEVICE

Download