| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | QSFP-H40G-CU50CM | |
| 2 | Arista Networks | CAB-Q-Q-0.5M | |
| 3 | Juniper | EX-QSFP-40GE-DAC-50CM | |
| 4 | Brocade | 40G-QSFP-C-00501 | |
| 5 | Dell | 332-1362 | |
| 6 | Intel | XLDACBL05 | |
| 7 | NVIDIA/Mellanox | MC2206130-00A |
| Dell Compatible |
332-1362
|
Vendor Name | HYTOPTODEVICE |
| Connector | QSFP+ to QSFP+ | Max Data Rate | 40Gbps |
| Cable Length | 0.5m (1.6ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | SFF-8436, QSFP+ MSA and IEEE 802.3ba |
| Minimum Bend Radius | 35mm | Application | 40G InfiniBand 8x DDR, 4x QDR, 10/40 Gigabit Ethernet, Fibre Channel |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host QSFP+ port must enable 40GBASE-CR4 mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 35mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard QSFP+ 40G ports; cannot be inserted into SFP+ or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 40G QSFP+ passive DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.





Q1: Will this Dell compatible 40G QSFP+ passive dac cable establish stable links between Dell and other vendor network devices? A: Yes, this HYTOPTODEVICE 40G QSFP+ passive dac cable supports cross-vendor interoperation. It is pre-flashed with Dell OS10 optimized EEPROM and fully validated to deliver reliable 40GBASE Ethernet connections across mixed-brand environments.
Q2: Why does Dell OS10 generate an unrecognized transceiver notification after plugging in this DAC? A: This alert appears when the switch vendor signature check fails. HYTOPTODEVICE pre-programs Dell-specific EEPROM profile for this 40G QSFP+ passive dac cable to minimize transceiver warning issues during your 40GBASE Ethernet deployment.
Q3: Can MSA-compliant 40G twinax DAC guarantee plug-and-play operation on white-box open switches? A: No, MSA specifications only define mechanical and electrical parameters. Generic twinax cables often lack valid identification signatures, while HYTOPTODEVICE 40G QSFP+ passive dac cable passes real open-switch validation for stable 40GBASE Ethernet operation.
Q4: What use cases fit a QSFP+ to 4×SFP+ breakout twinax DAC cable? A: A breakout DAC splits one 40G QSFP+ port into four separate 10G SFP+ links. This straight HYTOPTODEVICE 40G QSFP+ passive dac cable transmits full 40G bandwidth natively for point-to-point Dell 40GBASE Ethernet links.
Q5: Do Dell PowerSwitch OS10 platforms need special CLI settings to enable breakout DAC ports? A: Yes, breakout mode must be activated via OS10 CLI on supported ports. This HYTOPTODEVICE straight 40G QSFP+ passive dac cable needs no breakout configuration and runs native 40GBASE Ethernet out of the box.
Q6: When should I select a straight 40G DAC instead of a breakout 40G DAC for Dell data center setups? A: Straight 40G DAC creates one full 40G connection between two QSFP+ ports; breakout DAC divides bandwidth for multiple 10G downlinks. Our 40G QSFP+ passive dac cable is built for native Dell 40GBASE Ethernet point-to-point interconnection.
Q7: What is the maximum reliable reach you can get with passive 40G QSFP+ twinax copper? A: The reliable upper limit for passive 40G QSFP+ twinax is 5–7 meters. This 0.5m HYTOPTODEVICE 40G QSFP+ passive dac cable is ideal for ultra-short rack internal 40GBASE Ethernet with minimal signal attenuation.
Q8: How do different AWG ratings change signal loss for 40G twinax DAC on Dell racks? A: Thicker wires (lower AWG numbers like 24AWG) experience lower signal attenuation over longer runs (5m–7m), whereas thinner wires (30AWG) are better suited for short, flexible runs (0.5m–2m). This 30AWG HYTOPTODEVICE 40G QSFP+ passive dac cable balances flexible routing and steady signal integrity for short 40GBASE Ethernet links.
Q9: Which AWG grade works best for dense cable management with 40G QSFP+ DAC assemblies? A: Yes. 24AWG cables are thick, heavy, and rigid. They require careful bend radius management to prevent putting excessive mechanical strain on switch port cages. 30AWG twinax offers superior flexibility for dense layouts. This HYTOPTODEVICE 0.5-2m 40G QSFP+ passive dac cable uses 30AWG, making routing easier on high-density Dell patch panels and cable arms for 40GBASE Ethernet.
Q10: Is it okay to run passive 40G QSFP+ DAC outside the server cabinet or through wall conduits? A: No, passive twinax DAC is designed exclusively for indoor cabinet deployment. It has no outdoor-rated jacket protection, so this 40G QSFP+ passive dac cable must stay inside data racks for 40GBASE Ethernet.
Q11: What cable solution replaces passive 40G DAC when the required link length goes beyond 7 meters? A: Active Optical Cable (AOC) is the proper upgrade for links longer than 7m. This HYTOPTODEVICE 40G QSFP+ passive dac cable provides a zero-power, cost-effective solution for short rack-local 40GBASE Ethernet connections.
Q12: How does total project cost compare between 40G twinax DAC and QSFP+ transceivers paired with MTP fiber? A: Passive twinax DAC greatly cuts total hardware cost by removing optical module expenses. This HYTOPTODEVICE 40G QSFP+ passive dac cable reduces investment for short Dell 40GBASE Ethernet fabric interconnections.
Q13: Will nearby power cables cause EMI interference for this 40G QSFP+ passive dac cable? A: Shielded twinax suppresses EMI but remains more sensitive than fiber media. HYTOPTODEVICE uses premium shielding on this 40G QSFP+ passive dac cable to sustain stable 40GBASE Ethernet performance beside power cabling in Dell racks.
Q14: Can an adapter allow a 40G QSFP+ DAC to work inside a regular 10G SFP+ port? A: No, QSFP+ and SFP+ have different pin assignments and lane grouping structures. This 40G QSFP+ passive dac cable only functions between two native QSFP+ ports to establish valid 40GBASE Ethernet.
Q15: Can this Dell compatible 40G QSFP+ DAC directly connect a server QSFP+ NIC to a Dell switch? A: Yes, this works if the server NIC features a native QSFP+ interface. This HYTOPTODEVICE 40G QSFP+ passive dac cable builds low-latency 40GBASE Ethernet links between 40G NICs and Dell switching hardware.
Packaging & Custom OEM Solutions
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




