| NO. | Brand | Compatible P/N | Transceiver Type |
| 1 | Cisco | SFP-H25G-CU2M | |
| 2 | Arista Networks | CAB-S-S-25G-2M | |
| 3 | Dell | DAC-SFP-25G-2M | |
| 4 | H3C | SFP-25G-D-CAB-2M-A | |
| 5 | Juniper | JNP-25G-DAC-2M | |
| 6 | NVIDIA(Mellanox) | MCP2M00-A002 |
| Cisco Compatible | SFP-H25G-CU2M | Vendor Name | HYTOPTODEVICE |
| Connector | SFP28 to SFP28 | Max Data Rate | 25Gbps |
| Cable Length | 2m (7ft) | Wire AWG | AWG 30 |
| Cable Type | Passive Twinax | Power Consumption | ≤0.5W |
| Media | Copper | Operation Temperature | 0~ 70 °C (32 to 158°F) |
| Jacket Material | PVC(OFNR) | Protocols | IEEE 802.3, SFP28 MSA, SFF-8402, Infiniband, EIA 364-1000 |
| Minimum Bend Radius | 21mm | Application | 25G Ethernet, Data Center, 5G Wireless |
Usage Guidelines & Best Practices
Mandatory Port Setting: Host SFP28 port must enable 25GBASE mode; link negotiation failure will happen if forced to optical mode.
Cabling Requirements: Do not exceed the minimum 21mm bend radius, avoid sharp folding, heavy extrusion or long-term tension on the cable assembly.
Port Installation Standard: Works only with standard SFP28 25G ports; cannot be inserted into SFP or XFP slots. Disable the host’s third-party transceiver lock policy in advance if required.
Maintenance Specification: Hot‑swap supported, grip the pull tab instead of pulling the cable body during plug/unplug to prevent internal conductor damage.
Operating Environment: This commercial-grade cable operates reliably within 0℃‑70℃; avoid installation beside high-heat power modules.
For detailed operation instructions, please refer to the User Guide.
Full Compatibility List & Supported Devices
Built on universal MSA open standards, this 25G SFP28 DAC cable can interoperate with mainstream network brands including Arista, H3C, Juniper, Dell, NVIDIA Mellanox and Fortinet, for mixed-vendor rack stacking and server fabric expansion.






Q1: Does this Cisco compatible 2m passive DAC lock into full 25G line rate on Nexus NX-OS ports? A: Yes, this HYTOPTODEVICE passive DAC sustains full 25.78125Gbps line rate. It is pre-programmed with Cisco matching EEPROM and validated on NX-OS to maintain stable 25GBASE-CR links.
Q2: What is the maximum transmission distance supported for this SFP28 passive DAC standard? A: The official maximum reach for 25G SFP28 passive DAC is 5 meters. This 2m cable stays comfortably under the loss budget limit for Cisco same-rack deployments.
Q3: Can this SFP28 passive DAC connect a Cisco Nexus leaf switch to third-party server NICs like Intel E810? A: Cross-vendor interoperability works reliably with unified 25GBASE-CR and matching FEC settings. This HYTOPTODEVICE passive DAC follows MSA specs for mixed-vendor Cisco fabrics.
Q4: What differentiates the SFP28 form factor of this DAC from older SFP+ 10G DAC cables? A: SFP28 form factor supports up to 25G signaling, while SFP+ only supports maximum 10G. This passive DAC uses SFP28 housing to run higher-speed links for Cisco modern data centers.
Q5: What performance issue will appear if I extend this passive DAC beyond the 5m rated transmission limit? A: 25G electrical signals suffer rapid attenuation on copper twinax. Links over 5m produce CRC errors and intermittent flapping; longer distances require fiber optics instead.
Q6: Which networking applications benefit most from 25G passive DAC inside Cisco UCS server racks? A: NVMe storage, HPC computing and virtualization workloads gain the most value. This HYTOPTODEVICE passive DAC delivers consistent low latency for these Cisco use cases.
Q7: Can I deploy this 2m SFP28 passive DAC for direct server-to-server links between two Cisco UCS servers? A: Point-to-point server interconnect is fully supported with correct port configuration. This passive DAC works well for storage replication and cluster sync traffic within one rack.
Q8: How does wire gauge selection affect signal performance for 2m length 25G SFP28 passive DAC? A: 30AWG balances flexibility for 2m runs, while 26AWG offers better loss margin near the 5m ceiling. This unit adopts 30AWG twinax optimized for mid-length Cisco rack cabling.
Q9: Will firmware upgrades on Cisco Nexus switches break recognition of this pre-coded passive DAC? A: MSA-compliant passive DAC stays compatible through standard NX-OS firmware upgrades. HYTOPTODEVICE’s Cisco EEPROM profile remains recognized across mainstream stable releases.
Q10: When should I pick 25G AOC fiber cable instead of passive DAC for Cisco fabric applications? A: Choose active optical cables when links cross racks or exceed 5 meters. Passive DAC remains the zero-power, low-cost option for short intra-rack 25G connections.
Q11: How much latency reduction can this 25G passive DAC deliver compared with optical transceiver links on Cisco HPC nodes? A: Passive DAC cuts roughly 30–60ns latency by removing optical-electrical conversion steps. This advantage is critical for latency-sensitive trading and HPC environments.
Q12: Can this SFP28 passive DAC negotiate 25G speed if inserted into legacy 10G SFP+ ports on Cisco equipment? A: 25G negotiation is impossible on SFP+ ports due to different electrical specifications. Both ends must use native SFP28 ports to run this HYTOPTODEVICE passive DAC at full 25G.
Q13: Is QSFP28 breakout 4×25G DAC interchangeable with this SFP28 point-to-point passive DAC for Cisco ports? A: Breakout cables use different pinout and port split logic. They cannot replace this standard SFP28-to-SFP28 passive DAC for native 25G SFP28 ports.
Q14: What compatibility validation tests does HYTOPTODEVICE run on this Cisco-compatible passive DAC before shipment? A: Each batch completes BER scanning, link up/down and hot-swap testing on Cisco Nexus platforms. This validates EEPROM detection and stable 25G performance for production deployment.
Q15: What deployment boundaries should buyers know before purchasing bulk passive DACs for a Cisco data center rollout? A: Passive DAC is designed exclusively for short copper intra-rack links. It is not suitable for inter-row or campus-level connections that require optical fiber solutions.
ESD Protection & Fast Shipping: Every transceiver is sealed in an ESD-safe bag and ready for same-day dispatch from stock.
Custom OEM & Branding: We provide logo printing, private labeling, and custom packaging to help distributors and integrators build their brand—no factory investment required.

Why Network Engineers Choose HYTOPTODEVICE
HYTOPTODEVICE has supplied over 5000,000 optical transceiver modules to data centers, ISPs, and enterprise networks across 100+ countries since 2011. Every module undergoes a 72-hour burn-in test and full DDM/DOM validation before shipment.
“Phenomenal performance. We deployed 200 HYTOPTODEVICE SFP modules to replace Cisco OEMs in our backbone network. Result? Zero compatibility issues and a 60% reduction in costs. Highly recommended for mission-critical networks."— Senior Network Engineer, Regional Telecom, Australia
Quality Certification & Compliance
At HYTOPTODEVICE, our quality commitment is backed by industry-standard validations. From fiber optical transceiver manufacturing to final visual inspection, from IQC、IPQC、FQC to OQC, our processes ensure global compliance and reliability.
We adhere to rigorous standards for our SFP modules and network solutions:
ISO 9001: Certified quality management and production consistency.
CE & FCC: Fully compliant for seamless Global Market Access.
RoHS: Committed to environmental responsibility and hazardous material control.
Proven Reliability: Rigorous testing to reduce compliance risk and ensure safety.
Certified Quality. Global Standards. Guaranteed Performance.




